Buffalo TCUT7UL Assembly & Operating Instructions

TCUT7UL

7” Bench Top Tile Saw

Assembly & Operating Instructions

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation and maintenance. Every effort has been made to
ensure the accuracy of this manual.

We reserve the right to change this product at any time without prior notice.

STOP! DO NOT RETURN THIS PRODUCT TO THE RETAILER.

Questions? Problems? CONTACT BUFFALO TOOLS.

If you experience a problem or need parts for this product, visit our website
our customer help line at
receipt is required.

070914

1-800-568-6657, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the sales

http://www.buffalotools.com or call

7” Bench Top Tile Saw TCUT7UL Assembly and Operating Instructions

PARTS LIST

No. Description Qty No. Description Qty

1 Base 1 27 Lower Blade Plate 1
2 Nut 1 28 Screw 4
3 Blade Guard 1 29 Spring Washer 4
4 Support Bracket 1 30 Washer 6
5 Bolt 1 31 Plate 1
6 Table 1 32 Nut 1
7 Clamp Rod 1 33 Frame 1
8 Square Spacer 1 34 Screw 2
9 Moving Clamp 1 35 Carry Handle 1
10 Spring 1 36 Screw 2
11 Square Spacer 1 37 Cord Storage 2
12 Hex Screw 2 38 Nut 2
13 Washer 2 39 Adjustment Knob 2
14 Fence 1 40 Bolt 2
15 Fixed Clamp 1 41 Motor 1
16 Flat Washer 1 42 Screw 6
17 Connection Bolt 1 43 Frame 1
18 Cotter Pin 1 44 Star Washer 4
19 Clamp Lever 1 45 Strain Relief 1
20 Screw 2 46 Power Cord & Plug 1
21 Washer 8 47 Power Switch 1
22 Outer Blade Guard 1 48 Plate 1
23 Nut 1 49 Water Tray 1
24 Flange Cap 1 50 Angle Guide 1
25 Blade 1 Hexagonal Wrench 1
26 Flange Seat 1 Arbor Shaft Wrench 1

TCUT7UL 7” Bench Top Tile Saw

2

Assembly Diagram

TCUT7UL 7” Bench Top Tile Saw

50

3

COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PRODUCT.
THESE FACTORS MUST BE SUPPLIED BY THE OPERATOR. PLEASE REMEMBER:

1. Keep the work area clean. A cluttered work area may cause accidents. Make sure the work area is well lit.

2. Never use tools near flammable liquids or gasses.

3. Prevent electrical shock. Keep the power cord away from heat, oil, and sharp edges. Do not operate if
power cord is frayed or damaged.

4. Never allow children to operate tools without responsible adult supervision. When operating this tool,
keep children at a safe distance from the work area.

5. Store tools in a safe place. Tools that are not being used must be stored in a secure dry place. The
storage area should be lockable and out of the reach of children.

6. Do not force tile into the cutting blade. This machine performs better and safer at the rate for which it was
designed. Damage caused by forcing the tool is not covered by the warranty.

7. Use a tool designed for the job being performed. Do not use low-powered tools for heavy-duty
operations. Never use the machine for other than its intended purpose.

8. Wear suitable clothing. Do not wear loose clothing or jewelry. They may get caught in moving parts. Never
wear rings with protruding parts. Wear a hat over long hair. Wear rubber footwear.

9. Always wear safety goggles and ear protection when using the machine. Wear a dust mask when the
work is dusty.

10. Never carry the tool by the power cord. Do not pull the power cord to remove the plug from sockets.
Keep the power cord away from heat, oil and sharp edges.

11. Never hold small pieces of tile with your hand. Always use a jigs, push stick or pliers.

12. Do not reach over the cutter while tool is active. Be sure of your footing and balance at all times.

13. Maintain the tool with care. This tool works best and safest if it is kept clean. Observe the instructions for
maintenance and changing accessories. Keep the tool dry and free of oil and grease.

14. Disconnect the machine when you are not using it, before cleaning it and when changing accessories
or parts.

15. Before starting the machine, be sure to remove wrenches and other tools.

16. Never move the machine while it is plugged into an electrical outlet. Make sure the switch is in the
“OFF” position when the power cord is plugged-in.

17. When working outdoors, use extension cords marked and rated for outdoor use. When using
machines with a ground connection, an extension cord with a grounded connection should be used and
connected to a grounded outlet.

18. Stay alert. Do not use tools when impaired by medicine, drugs, or alcohol. Watch what you are doing and
use common sense for your safety.

TCUT7UL 7” Bench Top Tile Saw

4