Part. T8115A/GB - 04/04 - PC
User’s manual
Burglar alarm unit
Item No. 3500
Table of contents
1 Introduction 5
The Unit
The keypad
The display
What is the display showing
2 Operation 11
Enabling – disabling the burglar alarm (antitheft)
Activating - deactivating the zones
Stopping the siren sound
What type of alarm occurred?
3 Editing 17
The Unit menu
Accessing the edit menu
Setting the date and hour
Storing the Jolly number
Making your own list of telephone numbers
Setting up the calls
How many times should the calls be made?
Editing vocal messages
Changing the user code
Using an answering machine
4 Remote use 31
The My Home portal
Answering a call from the Unit
Querying the Unit
Controlling your home from a distance
Memo card
5
1
Introduction
The Unit
The keypad
Navigation keys
Alphanumeric keypad
The display
What is the display showing
6
Introduction
1
■ The Burglar alarm (antitheft) Unit
1 -Loudspeaker
2 -Graphic display
3 -IR infrared receiver
4 -Tr ansponder keys reader
1
2
3
4
7
5
6
5 -Alphanumeric keypad
6 -Microphone
7 -Navigation keys
The Burglar alarm (antitheft) unit combines both Burglar alarm
(antitheft) and telephone Dialling device (communicator) functions in one apparatus to give you an intelligent detecting and
remote alarm signalling system.
The Burglar alarm (antitheft) guards the safety of your house;
the system is split into zones that can be activated separately;
for example, at night, you can have protection only in the day
zone or only around your house, so you can move around
freely even when the system is on.
In case of an alarm, the Telephone dialling device
(communicator) warns you with a message, allowing you to
have direct control on what is happening in your house even
when you’re not there.
You can check the status of the Unit and system from a fixed
or mobile phone, listen to what is happening at home from a
distance or send a vocal message, which will be emitted
through the Unit loudspeaker or, if connected, through the
sound system.
The combination of roller shutter movement devices and lights
turning on lets you program the roller shutters to go up in case
of an alarm in order to confuse the burglar.
You can control the functions in your house (lights, roller
shutters, etc.) remotely with just a telephone call.
My Home portal Services
This lets you connect to the My Home portal and makes available
the My Home web service; for further details see page 30.
7
Introduction
1
■ The keypad
Scroll keys
allow you to scroll the list
of items in the menu
Selection keys
allow you to select the
functions, which in some
menus, may appear in the
last line
OK -
Key for entering the
selection or data
CLEAR -
Key for cancelling
the selection and for
returning to the previous
page – if it is held down,
you can escape from the
programming menu
Writing the text
◆ Press a numeric key several times until the required character
is displayed; if the required letter is near the same key as the
present letter, wait until the cursor moves
◆ To enter a space, press
0
◆ To m ov e the cursor, use the keys
◆ To delete a letter, position the cursor over it with the keys
and press
0
◆ To change from lower case to upper case, hold down the button
when the required character is displayed. The next characters
will be upper case; the procedure is the same to go back to
lower case
◆ You can enter punctuation marks by pressing
Navigation keys Alphanumeric keypad
8
Introduction
1
■ What is the display showing
1 2 3 4 -- -- -- --
15/07/03 14:22
1 2 3 4 -- -- -- --
1 2 3 4 -- -- -- --
15/07/03 14:22
System off,
e.g.: zones 1, 2, 3, 4 active
System on,
e.g.: zones 1 and 4 enabled,
zones 2 and 3 disabled
System off,
Technical alarm signal
■ The display
Initial page
1 2 3 4 -- -- -- --
15/07/03 14:22
1 2 3 4 -- -- -- --
ZONES
1 : Entrance
2 :Perimeter
3:Night
Exclude
System zones
(Max 8 zones)
Date and
hour
on/off indication
Technical indications
Alarm signal zone
In case of an alarm
Edit menu
Functions
Active zones
Disabled zones
9
Introduction
1
1 2 3 4 -- -- -- --
1 2 3 4 -- -- -- --
1 2 3 4 -- -- -- --
System on,
Burglar alarm (antitheft) signal
and telephone call in progress
System off,
recharging Unit battery
System off,
no power
1 2 3 4 -- -- -- --
15/07/03 14:22
1 2 3 4 -- -- -- --
15/07/03 14:22
1 2 3 4 -- -- -- --
-
+
System off,
Burglar alarm (antitheft)
battery
dead or damaged and
technical alarm
■ What is the display showing
System off,
Te lephone call disabled
(Important Unit functions are
disabled; disable only if
extremely necessary.)
System off,
Detector disabled
(Important Unit functions are
disabled; disable only if
extremely necessary.)
11
Enabling - disabling the burglar alarm (antitheft)
With user code
With remote control
With transponder key
Activating - deactivating the zones
With remote control
With transponder key
From the Zone menu
Stopping the siren sound
With remote control
With user code
With transponder key
What type of alarm occurred?
2
Operation
12
Operation
2
■ Enabling - disabling the burglar alarm
(antitheft)
With user code
When the burglar alarm
(antitheft) is disabled, an open
lock appears in the middle of
the display
The display will show a closed
lock; if the sound system is
enabled, you will hear an
“enabled” vocal message;
execute the same operation to
disable the burglar alarm
(antitheft)
1 2 3 4 -- -- -- --
25/05/03 12:23
1 2 3 4 -- -- -- --
25/05/03 12:23
1 2 3 4 -- -- -- --
25/05/03 12:23
With remote control
When the burglar alarm (antitheft)
is disabled, an open lock
appears in the middle of the
display
To enable the burglar alarm
(antitheft), press the remote
control button after directing it
towards the Unit infrared receiver
at a distance of 30 cm (max).
Press the
key
Ty pe in the user code
(basic 00000)
1 2 3 4 -- -- -- --
25/05/03 12:23
1 2 3 4 -- -- -- --
25/05/03 12:23
The display will show a closed
lock; if the sound system is
enabled, you will hear an
“enabled” vocal message;
execute the same operation to
disable the burglar alarm
(antitheft)
Loading...