BT VOYAGER CLASSIC DRIVER INSTALLATION GUIDE
BT Voyager USB
ADSL Modem
Downloading and Installing Drivers
Downloading and Installing Drivers
Downloading and Installing DriversDownloading and Installing Drivers
1. Download the file “BTVoyagerUSBADSL Modem.zip”
to a temporary folder on your Hard Disk drive
2. Uninstall the current drivers from your PC. This is
achieved by double clicking the Voyager icon in the
System Tray and then clicking “Uninstall”.
3. Create a new folder on Hard Disk drive – e.g. “Voyager
Drivers”
4. Unzip the downloaded file “BTVoyagerUSBADSL Modem.zip” to the new folder you
have created (you will need to use an unzip utility such as Winzip to perform this
function)
5. Ensure that the USB cable between the Voyager modem and PC is disconnected
6. Using Windows Explorer, navigate to the new folder “Voyager Drivers” and double
click on the file “Setup.exe”
7. Follow the on-screen instructions plugging in the USB cable when prompted.
8. If you are a Windows 98 user, you may be asked to insert your Windows 98 Installation
CD.
9. At the end of installation, restart your PC
Please note that the Diagnostic Tool, accessed from the Control Panel will not work as it has been excluded
from this driver to shorten the download time. This will not affect the operation of the driver.
Date: 14 January 2003
Page: 1 of 1
Issue: 2.0
Loading...