BT FREELANCE XD 7500 User Manual

BT Freelance XD7500
User Guide
Welcome…
to your BT Freelance XD7500 digital cordless telephone and answering machine
Digital call clarity with up to 300m range outdoors and up to
50m indoors (in ideal conditions).
• Directory – lets you store up to 20 names and numbers for easy dialling.
• Caller Display - lets you see who’s calling and your phone stores details of the last 10 callers in a Calls list.
• Digital answering machine with up to 15 minutes recording time.
• Play, repeat and delete your messages from almost any other phone.
1 Requires subscription to a Caller Display service. A quarterly fee may be payable.
1
Section
This User Guide provides you with all the information you need to get the most from your phone.
You must first set up your phone before you can use it. This doesn’t take long as it is easy to do. Just follow the simple instructions on the next few pages.
Need help?
If you have any problems setting up or using your BT Freelance XD7500, contact the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
Hearing aid?
Please note that the BT Freelance XD7500 works by sending radio signals between the base and handset. These signals may interfere with some hearing aids, causing a humming noise.
*Calls made from within the UK mainland network are free. Mobile and International call costs may vary.
Got everything?
• BT Freelance XD7500 handset
• BT Freelance XD7500 answering machine base
• 2 x NiMH AAA rechargeable batteries (already fitted)
• Battery compartment cover
• Mains power adaptor (item code 040367)
• Telephone line cord
If you have purchaseda BT Freelance XD7500 multiple pack you will also havethefollowing for each handset:
• BT Freelance XD7500 handset
• BT Freelance XD7500 charger
• Battery compartment cover
• 2 x AAA NiMH rechargeable batteries (already fitted)
• Mains power adaptor for the charger (item code 045667)
In this guide
4
Getting started
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setting up. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Set the date and time format . . . . . . . . . . . . 8
Set the date and time . . . . . . . . . . . . . . . . . . 9
Setting up the charger. . . . . . . . . . . . . . . . . . 10
Getting to know your phone
Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Handset display icons . . . . . . . . . . . . . . . . . . 12
Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Navigating the menus . . . . . . . . . . . . . . . . . . 14
Handset menu map . . . . . . . . . . . . . . . . . . . . 15
Default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Default settings table. . . . . . . . . . . . . . . . . . . 17
Using the phone
Switch the handset on/off . . . . . . . . . . . . . . . 18
Make a call . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Preparatory dialling . . . . . . . . . . . . . . . . . . . . 18
End a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Receiving calls . . . . . . . . . . . . . . . . . . . . . . . . 18
Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Handsfree . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Make a call in handsfree . . . . . . . . . . . . . . . . 19
Answer a call in handsfree. . . . . . . . . . . . . . . 20
Switch to handsfree during a call . . . . . . . . . 20
Secrecy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
To copy a redial number to the directory . . . 21
To delete a number from the redial list . . . . . 22
To delete the entire redial list . . . . . . . . . . . . 22
Keypad lock . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Ringer volume on/off . . . . . . . . . . . . . . . . . . 23
Page the handset(s) . . . . . . . . . . . . . . . . . . . . 23
Making internal calls . . . . . . . . . . . . . . . . . . . 24
Receiving internal calls . . . . . . . . . . . . . . . . . 24
Transferring calls. . . . . . . . . . . . . . . . . . . . . . . 24
3-Way conference calls . . . . . . . . . . . . . . . . . 25
Directory
Store a number. . . . . . . . . . . . . . . . . . . . . . . . 26
Entering names . . . . . . . . . . . . . . . . . . . . . . . 26
Dial/view a number . . . . . . . . . . . . . . . . . . . . 27
Edit a directory entry . . . . . . . . . . . . . . . . . . . 27
Delete a directory entry. . . . . . . . . . . . . . . . . 28
Delete all directory entries . . . . . . . . . . . . . . 28
Directory capacity . . . . . . . . . . . . . . . . . . . . . 29
Handset settings
Ringer melody . . . . . . . . . . . . . . . . . . . . . . . . 30
Ringer volume . . . . . . . . . . . . . . . . . . . . . . . . 30
Handset tones on/off. . . . . . . . . . . . . . . . . . . 31
Handset name . . . . . . . . . . . . . . . . . . . . . . . . 32
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Registering handsets . . . . . . . . . . . . . . . . . . . 33
Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Auto answer . . . . . . . . . . . . . . . . . . . . . . . . . . 34
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
5In this guide
Base settings
Change PIN code . . . . . . . . . . . . . . . . . . . . . . 35
Dial mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Ringer melody . . . . . . . . . . . . . . . . . . . . . . . . 36
Ringer volume . . . . . . . . . . . . . . . . . . . . . . . . 37
Delete handset . . . . . . . . . . . . . . . . . . . . . . . . 37
Caller Display
Calls list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
View/dial a number . . . . . . . . . . . . . . . . . . . . 38
To copy a Calls list number to the directory . 39
Delete a number. . . . . . . . . . . . . . . . . . . . . . . 39
Delete the entire Calls list . . . . . . . . . . . . . . . 40
Answering machine
Switch on/off . . . . . . . . . . . . . . . . . . . . . . . . . 41
Outgoing messages . . . . . . . . . . . . . . . . . . . . 42
Answer and Record . . . . . . . . . . . . . . . . . . . . 42
Answer only . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Select answer mode. . . . . . . . . . . . . . . . . . . . 43
Record your own outgoing message . . . . . . 43
Play/check outgoing message. . . . . . . . . . . . 44
Reinstate pre-recorded outgoing messages 44
Playing messages via the handset. . . . . . . . . 45
Adjust volume for message playback . . . . . . 46
Delete all old messages . . . . . . . . . . . . . . . . . 46
Playing messages via the base . . . . . . . . . . . 46
To record a memo. . . . . . . . . . . . . . . . . . . . . . 47
To playback a memo. . . . . . . . . . . . . . . . . . . . 48
Memory full . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Recording time . . . . . . . . . . . . . . . . . . . . . . . . 48
Answer delay . . . . . . . . . . . . . . . . . . . . . . . . . 49
Remote access . . . . . . . . . . . . . . . . . . . . . . . . 50
Change security PIN code . . . . . . . . . . . . . . . 50
Switch answering machine on . . . . . . . . . . . . 50
Check for messages . . . . . . . . . . . . . . . . . . . . 51
Remote access commands. . . . . . . . . . . . . . . 51
Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
General information
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Environmental . . . . . . . . . . . . . . . . . . . . . . . . 54
Product disposal instructions . . . . . . . . . . . . 55
Switchboard compatibility. . . . . . . . . . . . . . . 55
Dialling mode . . . . . . . . . . . . . . . . . . . . . . . . . 55
Recall (R). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Guarantee. . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
How many telephones can you have? . . . . . 57
R&TTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
Getting started
6
WARNING
Do not place your BT Freelance XD7500 in the bathroom or other humid areas.
Handset range
The BT Freelance XD7500 has a range of 300 metres outdoors when there is a clear line of sight between the base and the handset. Any obstruction between the base and handset will reduce the range significantly. With the base indoors and handset either indoors or outdoors, the range will normally be up to 50 metres. Thick stone walls can severely affect the range.
Signal strength
The symbol on your handset screen indicates when you are in range. When you are out of range, the symbol flashes, and the screen displays
SEARCHING
. You should move closer to the base if this happens to ensure the full functionality of your phone.
IMPORTANT
Do not connect the telephone line until at least one of the handsets is fully charged.
The base station must be plugged into the mains power at all times.
Location
You need to place your BT Freelance XD7500 base within 2 metres of a mains power and telephone socket so that the cables will reach.
Make sure it is at least 1 metre away from other electrical appliances to avoid interference.
Your BT Freelance XD7500 works by sending radio signals between the handset and base. The strength of the signal depends on where you site the base. Putting it as high as possible ensures the best signal.
Setting up
1. Plug the mains power cable into the power socket on the back of the base and secure the cable behind the retaining clip. Plug the other end into the mains socket and switch on.
Mains power cable
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
7Getting started
2. Batteries will come inserted in the battery compartment. Pull the plastic tag as instructed to activate the batteries.
3. Place the handset on the base to charge the batteries for at least 16 hours.
The main handset is pre-registered to the base as Handset 1. This is shown on the display. When the handset is fully charged the display shows the symbol.
4. After 16 hours, connect the telephone line cord to the base and plug the other end into the wall socket.
Telephone line cord
Which socket?
Power socket
Telephone line socket
Talk/Standby time
Under ideal conditions, fully charged handset batteries should give about 10 hours talk time or 100 hours standby time on a single charge.
Battery low warning
If the symbolisflashing,you will need to rechargeyour handsetbefore using it.
Battery performance
To keep your batteries in the best condition, leave the handset off the base for a few hours at a time (after the initial 16 hour charge).
New NiMH batteries do not reach full capacity until they have been in normal use for several days. Running the batteries right down at least once a week will help them last as long as possible.
IMPORTANT
Only use the power supply and telephone line cord supplied with your BT Freelance XD7500 otherwise the telephone may not work.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
8 Getting started
The charge capacity of rechargeable batteries will reduce with time as they wear out, so reducing the talk/standby time of the handset. Eventually they will need to be replaced. New batteries can be obtained from the BT Freelance Helpline 0800 218 2182.
Batteries and handset may become warm during charging. This is normal.
Your BT Freelance XD7500 uses the 24 hour clock.
If you have more than one handset registered to your base, you only need to set the date and time on one handset and the other handsets will be automatically updated.
Set the date and time format
1. Press the Left soft key to open the main menu.
2. Press or until the display shows press
OK
soft key.
DATE & TIME
is displayed, press theOKsoft
HS SETTINGS
key again.
3.
DATE FORMAT
is displayed, press theOKsoft key and the current format is displayed. Press or to change between
DD-MM-YY
and
MM-DD-YY
. Press theOKsoft key,
you will hear a confirmation tone.
4. Press and
TIME FORMAT
is displayed. Press theOKsoft key and the current format is displayed. Press or to change between 24hr and 12hr. Press the
OK
soft key, you
will hear a confirmation tone.
5. Press and hold the soft key to return to standby.
and
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
Set the date and time
1. Press the Left soft key to open the main menu.
2. Press or until the display shows press the soft key again.
3. Press or until the display shows the
4. The current time setting is displayed, enter 2 digits for the hour and 2 for the minute using the 24hr format (eg for 10.54pm, press ) and press the hear a confirmation tone.
5. Press and Press the
6. The current date setting is displayed, enter 2 digits for the day, 2 for the month and 2 for the year using the dd-mm-yy format (eg for 23rd May 2008 press
confirmation tone
7. Press and hold the soft key to return to standby.
OK
OK
soft key.
OK
) and press the
soft key.
SET DATE
soft key.
DATE & TIME
is displayed.
OK
soft key, you will hear a
HS SETTINGS
is displayed, press the
SET TIME
OK
and press
soft key, you will
and
OK
9Getting started
Your BT Freelance XD7500 is now ready for use.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
10 Getting started
Under no circumstances use non­rechargeable batteries. Only use NiMH rechargeable batteries with a capacity of 600mAh or higher. Using inappropriate batteries will invalidate your guarantee and may damage the telephone.
Helpline
If you are having any difficulties setting up or using your BT Freelance XD7500, please call the BT FreelanceHelpline on 0800 218 2182* or email
BT Freelance XD7500 multiple pack owners only
Location
You need to place your BT Freelance XD7500 charger close enough to a mains power socket so that the cable will reach.
Setting up the charger
1. Plug the power adaptor cable into the underside of the charger, plug the other end into the mains wall socket and switch the power on.
Mains power cable
2. Batteries will come inserted in the battery compartment. Pull the plastic tag as instructed to activate the batteries.
3. Place the handset on the charger and charge for at least 16 hours.
Your BT Freelance XD7500 multiple pack is now ready for
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
use.
Getting to know your phone
11
Handset
Press to display the Calls list, page 38,
and to move up menu options.
Use to increase the volume.
Use with icons displayed above the key.
Press to make and receive phone calls,
Press to display the Redial list, page 21
and to move down menu options.
Use to decrease the volume.
Press to replay the message
or skip to the previous message.
Press and hold to lock/unlock the keypad,
Press to activate handsfree
(loudspeaker) mode, page 19.
Up/Calls list
Left soft key
Talk
page 18.
Down/Redial list
4
*
page 23.
Handsfree
Display
With amber backlight.
Right soft key
Use with icons displayed above the key.
End call
Press to end the call in progress, page 18. Press and hold to turn the handset off, page 18.
2
Press to play and stop playback.
5
Press to delete the message.
6
Press to skip to the next message.
0
Press to insert a Pause in the number to be dialled, page 26.
#/
Press and hold to turn the ringer on/off, page 23.
/
Recall
Used when connected to a switchboard/PBX, and with some BT Calling Features.
Press to open the directory, page 26.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
12 Getting to know your phone
Handset display icons
These are the symbols you will see on your handset’s display.
Battery
On – battery full
On – battery needs charging
Flashing – low battery
Flashing – charging
Handset
On – handset in use Flashing – incoming call
Internal (top row)
On – internal call connected Flashing – incoming internal call from another handset
Int (bottom row)
Make an internal call
Handsfree
Handsfree on
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
Answer machine
On – answer machine on Flashing – new message received
Alarm
On – alarm set
Flashing – alarm time reached
Keypad lock
Keypad lock on
Ringer
Ringer turned off
Antenna
On – in range Flashing – edge of range
Left/right
Characters off the display
to the left/right
Up/down
Menu options exist above/below those shown on the display
Skip forward/backward
Use when playing messages to skip to previous/next message
New call
Indicates a new call in the calls list
Clear
Mute/unmute a call. Clears characters when in entry screen. Stops the alarm
Back
Return to previous menu
OK
Confirm menu selection
Menu
Open the main menu
Base
13Getting to know your phone
Vol.-/Vol.+
Adjust speaker volume during playback.
Ans on/off
Switch answering machine on/off.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
Find
Press to page/locate a handset.
Message display showing number of messages and answering machine status.
<<Skip
Repeat current message.
Delete
Delete messages during playback.
Skip>>
Skip forward during message playback.
Play
Play messages.
14 Getting to know your phone
Navigating the menus
Your BT Freelance XD7500 handset features an easy to use menu system. Have a look at the menu map on the next page.
When the handset is switched on and in standby:
1. Press the Left soft key to open the main menu and select the function you want by pressing the or button.
Left soft key
Right soft key
Up and Down keys
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
Handset menu map
15Getting to know your phone
Ans Machine
Play Message
Delete All
Memo
Ans On/Off
Ans Settings
Calls List
Store Number
Delete
Delete All
Details
Directory
Add
View
Edit
Delete
Delete All
Capacity
BS Settings
Base Ringer
Ring Volume
Delete HS
Dial Mode
Change PIN
HS Settings
Date & Time
Alarm
Ringer
Tones
HS Name
Display
Auto Answer
Registration Reset
Menu navigation
Press or to scroll through the menu options.
Press Left soft key
OK
to select an option.
Press Right soft key to go back to the previous display screen.
Press and hold Right soft key to return to the standby display screen.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
16 Getting to know your phone
The default PIN setting is 0000.
Default
You can reset your BT Freelance XD7500 back to the default settings. This will not delete your directory entries.
1. Press the Left soft key to open the main menu.
2. Press or until the display shows
3.
PIN?
Is displayed, enter the PIN and pressOK.
4.
CONFIRM?
is displayed, pressOK.
RESET
and pressOK.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
Default settings table
17Getting to know your phone
Handset
Redial List
Call List
External Ringer Melody
Internal Ringer Melody
Ringer Volume
Earpiece Volume
Speaker Volume
Handset Name
Key Tone
Low Battery Tone
Out of Range Tone
Ringer On/Off
Auto Answer On/Off
Date Format
Date
Time Format
Time
Alarm
Key Lock
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
Default Value
Empty
Empty
Melody 1
Melody 3
Volume 5
Volume 4
Volume 4
HANDSET
ON
ON
OFF
ON
ON
DD/MM/YY
01/01/08
24 hr
00:00
OFF
OFF
Base
System PIN (4-digit)
Base Ringer
Ringer Volume
Dial Mode
Answer Machine
Answer Machine ON/OFF
Answer Mode
OGM
Answer Delay
Record Time
BS Screening
Remote Access
Remote Access PIN (4-digit)
Default Value
0000
Melody 2
Volume 3
Tone
Default Value
ON
ANS & REC
Default OGM
6 Rings
180 SEC
ON
ON
0000
Using the phone
18
Call timer
Your handset automatically displays the duration of every external call. The call time will remain on the display until 2 seconds after the call has ended.
Switch the handset on/off
1. Press and hold to switch the handset on and off.
Make a call
1. Press .
Enter the telephone number and the number is dialled.
Preparatory dialling
Use preparatory dialling to see and check the number on
Press Right soft key incorrect digit.
C
to delete an
the display before you dial out. The display can only show 12 digits at a time, if you enter a number with more than 12 digits, will be displayed to the left of the number to indicate more digits.
If you have subscribed to a Caller Display service, your caller’s number will also be shown. If the number is withheld the display will show
WITHHELD
. If an exact number match is found in the Directory, the name will be displayed instead of the number. See page 38 for more information.
Internal calls
When you receive an internal call, the calling handset number will be shown on the handset display.
1. Enter the number first then press or to dial.
End a call
1. Press or place the handset back on the base.
Receiving calls
When you receive an incoming call, the telephone will ring and the icon will flash. If the ringer is set to off, the phone will not ring but you will hear one short beep tone to alert you.
1. If the handset is not in the base/charger, press or to answer the call.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
Loading...
+ 40 hidden pages