General information
For information on safety instructions,
cleaning, technical information or
connecting to a switchboard, please
refer to the ‘General Information’
section in the full user guide at
bt.com/producthelp
Guarantee
Your BT Elements 1K is guaranteed for a period of 12
months from the date of purchase.
Subject to the terms listed below, the guarantee
will provide for the repair of, or at BT’s or its agent’s
discretion the option to replace the BT Elements 1K, or
any component thereof, (other than batteries), which
is identified as faulty or below standard, or as a result
of inferior workmanship or materials. Products over 28
days old from the date of purchase may be replaced
with a refurbished or repaired product.
The conditions of this guarantee are:
• The guarantee shall only apply to defects that
occur within the 12 month guarantee period.
• Proof of purchase is required.
• The equipment is returned to BT or its agent
as instructed.
This guarantee does not cover any faults or defects
caused by accidents, misuse, fair wear and tear,
neglect, tampering with the equipment, or any
attempt at adjustment or repair other than through
approved agents.
This guarantee does not affect your statutory rights.
To find out what to do, if your phone is in or outside
of the 12 month guarantee, please look in the full user
guide at bt.com/producthelp
How to recycle your equipment
The symbol shown here and on the product
means that the product is classed as electrical
or electronic equipment, so DO NOT put it in
your normal rubbish bin.
It’s all part of the Waste Electrical and Electronic
Equipment (WEEE) Directive to recycle products in
the best way – to be kinder to the planet, get rid of
dangerous things more safely and bury less rubbish
in the ground.
Please contact the supplier for advice on how to
dispose of this product in an environmentally
friendly way.
Battery information
Caution: risk of explosion if battery is replaced by an
incorrect type.
DO NOT put used batteries in your normal rubbish bin.
You can dispose of them at council recycling sites as
well as at some shops and shopping centres.
Warning
You won’t be able to call 999 from this phone if
there’s a power cut, so make sure you’ve got
another way to call for help in an emergency.
R&TTE Directive & Declaration of Conformity
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards.
This equipment complies with the essential requirements
for the Radio Equipment and Telecommunications
Terminal Equipment Directive (1999/5/EC). For a
copy of the Declaration of Conformity please refer
to bt.com/producthelp
2 Charge
1 Plug the remaining mains power adaptor into the back of the charger and plug the
other end into the mains power wall socket and switch the power on.
2 Remove the handset wrap and place the handset on the charger. The red charging
light will come on and the handset will check for a link with the base station.
Once found, follow the set-up wizard.
3 Once set up is complete your handset will display ‘Line cord error. Please check,’
press Hide and leave the handset on the base to charge for 24 hours.
4 After 24 hours plug the telephone line cord from the base into the telephone
wall socket.
Long range antenna
To achieve the full 1km range from your handset you’ll need to attach the long range
antenna provided. Simply unscrew the smaller antenna on the handset and replace
with the long range antenna.
Yo u r BT E l e me nt s 1 K i s n o w re ad y t o u se .
Please
turn
over
Check box contents
Handset
2x Mains power adaptors
(item code 066270)
Telephone line cord
(pre-installed)
Li-ion 3.7V
550mAh battery
(already in handset)
Base
1 Plug in
Important: Only use the mains power adaptors, cables and rechargeable batteries
supplied in this box, or this product may not work. Any replacement rechargeable
batteries must be of the same type. BT accepts no responsibility for damage
caused to your BT Elements 1K by using any other type of batteries.
Handset
Charger
Mains power adaptor
(item code 066270)
Li-ion 3.7V
550mAh battery
(already in handset)
Contents for each additional handset (multipacks only)
1
1 Plug the mains power adaptor into
the base, with the cable clipped in the
groove provided.
Turn the cable when clipping into the
groove so that the narrow part fits
between the clips before turning cable
back to secure.
2 Plug the other end of the power
adaptor into the wall power socket
and switch on. You will hear a
confirmation tone.
3 The telephone line cord is already fitted
but don’t plug the other end into the
wall socket yet.
2
3
Offices worldwide
The services described in this publication are subject to availability and may be
modified from time to time. Services and equipment are supplied subject to
British Telecommunications plc’s respective standard conditions of contract.
Nothing in this publication forms any part of a contract.
© British Telecommunications plc 2014.
Registered Office: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Designed and produced by The Art & Design Partnership Ltd.
Printed in China / Issue 3 / ADP10-14
98%
For a Better Future
We’re always looking to make our products last longer
and use less power, so we don’t have such a big impact
on the environment.
To find out about what we are doing, visit
bt.com/betterfuture
1 Plug in
2 Charge
3 Go!
If you’d like further help, or to view the full user guide, please visit our website
bt.com/producthelp or call our helpdesk on 0800 145 6789*
* Calls made from within the UK mainland network are free. Mobile and International call costs may vary.
User Guide
Belt clip
(pre-installed)
Screws and plugs
Belt clip
(pre-installed)
Charger Long range
antenna
Place the large base close enough to a mains power and telephone socket so that
the cables will reach. Make sure it is at least 1 metre away from other electrical
appliances to avoid interference.
The strength of the signal depends on where you site the base. Putting the base
unit as high as possible can help provide the best signal/range.
The BT Elements 1K charger can be located wherever you want, provided it’s within
reach of a mains power socket.
Screws and plugs
Long range
antenna
BT Elements 1K
Digital Cordless Phone with Answer Machine
Setting up is easy. Just follow the simple steps in this guide.
Set the answer delay
For compatibility with BT 1571 or another voicemail service make sure the answer
delay is set for your answer machine to answer before the voicemail service, e.g.
for BT 1571 do not set to more than 4 rings.
Select Menu, Answer Phone is displayed, press Select.
Press until Settings is highlighted, press Select.
Press to highlight either Ans. & record or Answer only and press Select.
Answer delay is displayed, use and to display the number of rings you want (0-10
or Time saver) and select Save.
When a new message is left you’ll hear a beep from the base. To change the alert
settings, enter the Menu and select Settings, Sound, then Alert tones.
4 Block calls
The BT Elements 1K blocks numbers in two separate ways to help you
avoid nuisance calls, firstly by type e.g withheld or international and also by
your choice of specific numbers (you can store up to 10 numbers of your own choice).
Select Menu, scroll to Call Control and press Select.
Follow the instructions to set your PIN for the first time and select OK.
Incoming calls is displayed, press Select.
Press to highlight Block calls and press Select. You now have 2 choices:
i) To block calls by type, when By call type is highlighted, press Select. Select Blocked
or Allowed for each of the call types by highlighting each one: International,
Withheld number, No Caller ID and Payphone using and , then select Save.
ii) To block calls by a specific number, press to highlight By number and
press Select. You will enter the block calls list, highlight an Empty slot and select
Add. Enter the number you want to block (or you can select Options and select
a number from your contacts or calls list) then select Save.
Calls from numbers stored in your blocked calls list cannot leave a message on your
answer machine but calls blocked by call type can.
Please note, other products connected to the line are not compatible with this
feature and will still ring.
3 Go!
Making calls
Press then dial the phone number. Press to end the call.
Answering calls
If you have subscribed to Caller Display, the caller’s details will be displayed before you
answer (see below and also the full user guide online at bt.com/producthelp for details).
Lift the handset from the base or charger to answer incoming calls. If the handset is not
on the base or charger, press .
Mute
Select Mute by pressing the right option button during a call if you want to prevent the
caller hearing anything from your end. Select Unmute to return to your caller.
Contacts
Storing new contacts (up to 200)
From the home screen, press .
Select Options. Add contact is highlighted, press Select.
Enter the name using the letters on the keypad. You may need to press the same button
a few times until the letter you want is displayed, for example, press once for A, or
twice for B.
Press and enter the home phone number. Press to enter a mobile number and
then a work number if you want to. Press again to select a ringtone. Select Save
when you’ve finished. The display will show Contact saved.
Dialling a contact
From the home screen, press . Scroll or to display the entry you want and
press to dial.
Or, search alphabetically using the keypad to enter the first letter of the name you want
then scroll or to the exact entry and press to dial.
Caller Display and the Calls list
For Block calls, Caller Display and the Calls list, you must subscribe to a Caller Display
service for this feature to work. Your network provider may charge you for this service.
View and dial from the calls list (up to 50 incoming calls and 30 outgoing calls)
The number of new calls will be shown on the home screen when incoming calls
have been missed e.g. . You can clear the notification by viewing the calls list on
any handset registered to the base. The will show for missed calls, will show for
outgoing calls or will show for incoming calls so that you can differentiate between
the types of calls in the calls list.
Press or select Calls, then or to scroll through and view the list.
To dial an entry, press when the entry is highlighted.
Save a Calls list entry to your contacts
Press , then scroll or to highlight the entry you want and select Options.
Highlight Save number and press Select. You have two options:
To save as a new contact: highlight New contact and press Select. Highlight the type of
number, press Select. Enter the contact name and select Save. Or,
To add to an existing contact: highlight Add to contact, press Select. Scroll to highlight
the entry you want, press Select. Highlight the number type you want to save the
number under (home, work or mobile) and press Select.
Answer machine
Your answer machine is on and ready to record messages. The features can be accessed
via the handset Answer Phone menu.
Recording your own outgoing message
Select Menu, Answer Phone is displayed, press Select.
Outgoing msg is highlighted, press Select.
Press or to highlight the outgoing message mode you want: Ans. & record or
Answer only and press Select.
Record message is highlighted, press Select. Follow the voice prompt to record your
message and select Save when you’ve finished. Your message will be played back to you.
Select OK if you’re happy with it (or delete it by selecting Delete).
Your p hone
Handset
The answer machine handset controls on buttons and will only
work when a message is being played on the handset.
Right option button
Press to confirm the option
displayed on the screen above the
button, to delete or go back to the
previous screen.
In answer machine mode, deletes
current message playing.
In idle mode, press to enter the
Calls list.
From the home screen, press to move
right to highlight new events. During
menu navigation, use to change
settings. In text entry mode, use to
move the cursor.
End a call.
Press and hold for 5 seconds to turn
handset on/off.
Enter Calls list, decrease incoming
speech volume and move down
through menu options.
When answer machine message
playing, press to delete message.
When answer machine message playing,
press to skip forward to next message.
Press and hold to lock/unlock keypad.
Toggle between upper and lower
case characters.
Recall for use with some BT calling
features and when connected to a
switchboard/PBX.
Press and hold to turn the ringer
on or off.
to Speed dial buttons
In standby, press and hold to dial
a stored speed dial number.
Find out more
• Frequently Asked Questions are available at bt.com/producthelp
• If you’d like more detailed instructions, a full user guide is available to
download from bt.com/producthelp
• If you cannot find the answer to your problem in the full online user guide, then
please call our free Helpline on 0800 145 6789*. Our dedicated advisors are more
likely to be able to help you than the retailer where you made your purchase.
• This document is also available in other formats, such as Large print, Braille
and Audio CD. If you would like a copy, please call 0800 145 6789*.
Help Most problems can be fixed with a few simple checks.
Problem Solution
No dial tone or line cord error
message displayed on-screen
Only use the cables and batteries supplied.
Make sure both the mains power adaptor cable and
telephone line cord are plugged into the correct sockets.
Poor speech quality Make sure the product is not located too close to other
electrical appliances. This can also help improve the
handset range from the base.
Battery icon flashing
and Battery low
displayed on screen
The battery charge is very low. Make sure you charge the
batteries for 24 hours before use to ensure maximum
battery performance.
Using broadband on the same
phone line?
Make sure you plug the phone into the wall
socket via an ADSL microfilter (not supplied),
otherwise you may have problems with
this product and your broadband service.
If you use BT Infinity, you will not need to use an ADSL microfilter.
For other types of broadband, please check with your
provider if a microfilter is required.
Can’t achieve full 1km range 1km range is achieved in ideal conditions. Obstacles
between the handset and the location base, such as
buildings, will affect the range performance.
Battery
Low
ADSL
microfilter
Move up through menu options.
Increase incoming speech volume.
In idle mode, press to adjust the
ringer volume.
Left option button
Press to enter the main menu,
access sub menus and confirm options
shown on the display
above the button.
From the home screen, press to move
left to highlight new events. During
menu navigation, use to change
settings. In text entry mode, use to
move the cursor.
In standby mode
make/receive phone calls.
In talk mode switch handsfree on/off.
From the home screen, press
to access a highlighted event
on the display: missed calls,
answer phone or text messages.
In standby, press and hold to
dial BT 1571 or your stored
speed dial number.
When answer machine message
playing, press to repeat message
from the beginning.
When answer machine
message playing, press to skip
back to previous message.
Access your stored Contacts.
Finding your way around your phone
Your BT Elements 1K has an easy to use menu system. Each menu has a list of options.
When the handset is switched on and at the home screen:
1. Select Menu by pressing the Left option button to open the main menu.
2. Use the or button to scroll through the available menu options.
3. When the menu you want is displayed, select by pressing the Left option button
or press .
4. Use the or button to scroll through the available sub menu options.
When the sub menu you want is highlighted, select by pressing the Left option
button or press .
Select the Back option if you want to return to the previous screen.
To exit a menu and return to the home screen, press .
If no buttons are pressed for 30 seconds, the handset returns to the home
screen automatically.
Loading...