BT Duet 20 User Manual

User
Guide

BT DUET 20

BT Duet 20 – Issue 2 Edition 01 – 12.02.04 – 5957

BT Duet 20 – Issue 2 Edition 01 – 12.02.04 – 5957

■ Use redial to quickly redial the last number

called at the touch of a button.

■ With secrecy on, you can talk to someone

in the room without your caller hearing.

■ The Calls light flashes to indicate an

incoming call.

■ With Call Waiting*, when you are already on a

call and another caller is trying to get through
the call waiting beep will sound to alert you.

■ Desk or wall mountable for your convenience.

* To use this feature you must subscribe to a

Call Waiting service from your network provider.
A quarterly fee is payable.

Welcome…

to your BT Duet 20
Corded Telephone

BT Duet 20 – Issue 2 Edition 01 – 12.02.04 – 5957

3 Getting started

Connecting the handset and line cords

1. Plug one end of the handset cord into the handset
socket and the other end into the socket at the
end of the base.

2. Plug the telephone line cord into the socket on the
underside of the base. Plug the other end into the
telephone wall socket.

■ If you want to use the phone on a desk or similar surface, press

the telephone line cord into the groove on the underside of the
base so that the phone sits flat.

If you want to wall mount the phone see the following section.

Wall mounting your phone (optional)

1. Drill two holes in the wall 133mm vertically apart.

2. Insert the wall plugs into the holes, then drive in
the screws. Leave approximately 5mm of the
screw head protruding from the wall to hold the
base securely in place.

3. Slide out the handset hook on the base, rotate it
180º and replace it. The handset will rest on the
hook when wall mounted.

Wall plug

Screw

Wall

133mm

Pause

Secrecy

G

H

I

P

Q

R

S

2

1

5

8

4

7

0

BT Duet 20 – Issue 2 Edition 01 – 12.02.04 – 5957

4 Getting to know your p

Hook switch

Lets you make a follow-on call

without replacing the handset.

If wall mounted, allows your handset

to rest securely on the base.

Pause

Press to enter a pause.

Secrecy

Allows you to speak to

someone nearby without your

caller hearing you.

C

a

l

l

s

Redial

Call Waiting

Recall

D

E

F

A

B

C

J

K

L

M

N

O

T

U

V

W

X

Y

Z

6

9

BT Duet 20 – Issue 2 Edition 01 – 12.02.04 – 5957

Ringer High/Low/Off switch

Lets you select the preferred
ringer volume.

Redial

Redials the last number called.

Call Waiting*/Recall

When you hear the Call Waiting
beep, press to accept the waiting
call.

Use Recall with some BT Calling
Features and with switchboards.

Calls light

Flashes red when
you are receiving
a call.

* To use this feature you must subscribe to a

Call Waiting service from your network provider.
A quarterly fee is payable.

BT Duet 20 – Issue 2 Edition 01 – 12.02.04 – 5957

6

Make a call

1. Lift the handset and wait for the dial tone.

2. Enter the telephone number and it will be dialled.

End a call

1. Replace the handset to end a call.

Or

Press the hook switch to make a follow on call.

Receive a call

1. When you receive a call, the phone will ring and
the red Calls light will flash.

2. Pick up the handset to answer the call.

Redial

1. Press . The last number called is
automatically redialled.

Secrecy

1. During a call, press and hold . Your caller
cannot hear you now.

2. Release to resume your call.

Ringer volume

1. Adjust the switch to your preferred volume, High,
Low or Off (if you do not want to be disturbed).

Using the phone

BT Duet 20 – Issue 2 Edition 01 – 12.02.04 – 5957

7 Using the phone

Call Waiting

■ Please note

To use this feature you must subscribe to a Call Waiting service
from your network provider. A quarterly fee is payable.

When you are on a call and another caller is trying
to get through, the Call Waiting beep will sound to
alert you.

1. Press to put your current call on hold and
accept the waiting call.

2. Press again to alternate between the
two calls.

BT Duet 20 – Issue 2 Edition 01 – 12.02.04 – 5957

8 General information

Safety

■ Clean the phone with a damp (not wet) cloth, or

an anti-static wipe. Never use household polish as
this will damage the product. Never use a dry cloth
as this may cause a static shock.

■ Do not expose to direct sunlight.

■ Do not stand your product on carpets or other

surfaces which generate fibres, or place it in
locations preventing the free flow of air over
its surfaces.

■ Do not submerge any part of your product in

water and do not use it in damp conditions, such
as bathrooms.

■ Do not expose your product to fire, explosive or

other hazardous conditions.

Guarantee

■ For your records

Date of purchase:

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Place of purchase:

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Serial number:

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

For guarantee purposes proof of purchase is required so please
keep your receipt.

Your BT Duet 20 telephone is guaranteed for a
period of 12 months from the date of purchase.

Subject to the terms listed below, the guarantee will
provide for the repair of, or at BT’s or its agent’s
discretion the option to replace the BT Duet 20, or
any component thereof, which is identified as faulty
or below standard, or as a result of inferior
workmanship of materials. Products over 28 days
old from the date of purchase may be replaced
with a refurbished or repaired product.

BT Duet 20 – Issue 2 Edition 01 – 12.02.04 – 5957

9 General information

The conditions of this guarantee are:

■ The guarantee shall only apply to defects that

occur within the 12 month guarantee period.

■ Proof of purchase is required.

■ The equipment is returned to BT or its agent

as instructed.

■ This guarantee does not cover any faults or

defects caused by accidents, misuse, fair wear and
tear, neglect, tampering with the equipment, or
any attempt at adjustment or repair other than
through approved agents.

■ This guarantee does not affect your statutory rights.

Outside of the 12 month guarantee period:

If your product needs repair after the guarantee
period has ended, the repair must meet the
approval requirements for connection to the
telephone network. We recommend that you
contact BT’s approved repair agent, TecLogic on
01672 564444 or a local qualified repairer.

Returning your phone

Where possible, pack the product in its original
packaging. Please remember to include all parts,
including the line cords. (Please note that we
cannot take responsibility for goods damaged in
transit.) Please obtain and keep proof of posting
from the sender.

BT accessories and
replacement items

For a full range of accessories and replacement
items for BT products, please call 0870 240 5522
or visit www.withandwithoutwires.com.

BT Duet 20 – Issue 2 Edition 01 – 12.02.04 – 5957

10 Technical information

How many telephones can you have?

All items of telephone equipment have a Ringer
Equivalence Number (REN), which is used to
calculate the number of items which may be
connected to any other telephone line. Your BT
Duet 20 has a REN of 1. A total REN of 4 is
allowed. If the total REN of 4 is exceeded, the
telephone may not ring. With different telephone
types there is no guarantee of ringing, even when
the REN is less than 4.

R&TTE

This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards.

This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
1999/5/EC.

Declaration of Conformance

Hereby, PDT, declares that this BT Duet 20 is in
compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
The Declaration of Conformance for the BT Duet 20
is published on the website:

http://www.pdtuk.com/archive/certificates/duet/
d20cert0001.html

Switchboard compatibility

This product is intended for use within the UK for
connection to public telephone network and
compatible switchboards, which support tone
dialling and timed break recall. If in doubt please
consult your network service provider.

BT Duet 20 – Issue 2 Edition 01 – 12.02.04 – 5957

11 Technical information

Switchboard external line
access code

When connected to an internal switchboard, you
may need to enter an access code (e.g. 9) to get
an outside line. So that the switchboard has time
to pick up an outside line, you may also need to
add a pause after the access code. A ‘pause’ lasts

3.6 seconds.

To insert a pause

1. Begin dialling a number and press where a
pause is required.

■ You may also need to insert a pause when dialling international

numbers, charge card numbers and with other tele-banking
facilities.

Recall

The button is used when connected to
certain switchboards, for example to transfer calls,
and for some BT Calling Features or those services
available via your network provider.

BT Duet 20 – Issue 2 Edition 01 – 12.02.04 – 5957

Offices worldwide

The telecommunications services described in this publication
are subject to availability and may be modified from time to time.
Services and equipment are provided subject to British
Telecommunications plc’s respective standard conditions of
contract. Nothing in this publication forms any part of any contract.

© British Telecommunications plc 2004.
Registered Office: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
BT Duet 20 (02/04) Issue 2 – 1
Designed and produced by The Art & Design Partnership Ltd.
Printed in China

Visit us at www.bt.com