User Guide
Dual-Band Wi-Fi Kit 600
Follow the steps in this guide to set up your kit.
If you need some help, see the Frequently Asked Questions at bt.com/producthelp or call 0808 100 6116*.
* Calls made from within the UK mainland network are free. Mobile and International call costs may vary.
1 Connect your base station
2 Set-up your dongle
3 Connect your device to base station
Check box content:
Dual-Band Wi-Fi
Dual-Band Wireless Dongle 600 Dongle install CD
Find out more
• If you need more detailed instructions, Frequently Asked Questions are
available at bt.com/producthelp
• If you cannot find the answer to your problem in the Frequently Asked Questions,
then please call our free Helpline on 0808 100 6116*. Our dedicated advisors
are more likely to be able to help you than the retailer where you made
your purchase.
Wi-Fi Base Station
Power
Router
Ethernet
Wireless
Wi-Fi Base Station Ethernet cable Mains power adapter
1 Connect your base station
The base station adds 5Ghz wireless to your existing network. Make sure your
hub/router is up and working and place the base station next to it.
1 Connect the power supply to the base station. The Power light will glow green. If not,
check the On/Off switch on the back.
2 Plug one end of the ethernet cable into a port on your router/hub. Use the GigE port
if your router has one (it’s port 4 if you have a BT Hub 3). Plug the other end into the
base station Router port. The Router light will glow green.
1
2
2 Set-up your dongle
See ‘Connection help’ if you don’t have a CD drive on your computer.
IMPORTANT: Do NOT plug the dongle in until you’ve installed the drivers from the CD.
1 Insert the CD into your CD-ROM drive and click Run Setup.exe to begin install drivers.
2 Follow the on-screen instructions until set-up is complete.
3 Plug your dongle into a USB port and click Finish. Give it a couple of minutes to
set itself up.
TIP: Using a company laptop? You might need administrator rights.
(The driver install procedure in different
operating systems is quite similar.
This example uses Windows 7).