BT DIVERSE 7100 ADDENDUM, DIVERSE 7200 ADDENDUM, DIVERSE 7400 ADDENDUM User Manual

Addendum

BT Diverse 7100/7200/7400 Charger wall mounting instructions

The screws supplied to wall mount your BT Diverse 7100/7200/7400 charger
will NOT be suitable for all wall types. BT recommends that you seek advice
from a building professional before attempting to wall mount your phone.
BT are not responsible for any damage/injury caused while attempting to wall
mount your phone.

Before you wall mount, please check that:

• the wall can support the weight of the charger and phone

• you are not drilling into any hidden wiring or pipes

• the power adaptor cable will reach the power socket in your wall

Please
turn
over

9623 Diverse 7000 Addendum [2].indd 1 23/12/09 10:44:16

Wall mounting the handset and charger

1. Drill 2 holes in the wall approximately 54mm horizontally apart. Use a 5mm drill bit

if you will be inserting the supplied wall plugs. A small pilot hole only is required for
xing screws into timber. Use the wall mounting bracket as a template if necessary.

54.0

2. Insert the wall plugs if using them and then insert the screws leaving about

2.5mm protruding from the wall on which to hang the phone.

3. Plug the power adaptor into the back of the charger.

4. Slide the charger onto the 2 protruding screws and push down to x into

position making sure it is securely in place.

9623 Diverse 7000 Addendum [2].indd 2 23/12/09 10:44:16