Networked Signal Processors |
bssaudio.com |
Soundweb™ London
Analog Input/Output Cards
4 3 2 1
Connector 2 |
|
|
Connector 1 |
S |
S |
S |
S |
O V E R V I E W :
The Soundweb London Analog Input and Analog Output Cards are designed to populate any of the four card slots on Soundweb London BLU-800, BLU-320, BLU-160, BLU-120, BLU-80, BLU-32 and BLU-16 devices. These analog cards enable Soundweb London devices to send line level signals and receive microphone / line level signals.
The Soundweb London Analog Input Cards offer Phantom Power, configurable per channel and software controlled analog gain in 6dB steps from 0dB to 48dB.
The Analog Cards each have two Combicon connectors which are used as follows:
Analog input card:
•Connector 1
o Balanced / Unbalanced Audio, Channel 1 - Mic/Line o Balanced / Unbalanced Audio, Channel 2 - Mic/Line
•Connector 2
o Balanced / Unbalanced Audio, Channel 3 - Mic/Line o Balanced / Unbalanced Audio, Channel 4 - Mic/Line
Connector |
[Mic/Line Combicon] |
[Mic/Line Combicon] |
|||
Signal |
4 |
3 |
2 |
|
1 |
Pin |
[S + -] |
[S + -] |
[S + -] |
[S + -] |
|
Balanced |
Hot: to + |
Unbalanced |
Hot: to + |
||
|
Cold: to - |
|
|
Link to Shield: to - |
|
|
Shield: to S |
|
|
Shield: to S |
|
Analog OUtput card:
•Connector 1
o Balanced / Unbalanced Audio, Channel 1 - Line o Balanced / Unbalanced Audio, Channel 2 - Line
•Connector 2
o Balanced / Unbalanced Audio, Channel 3 - Line o Balanced / Unbalanced Audio, Channel 4 - Line
Connector |
[Line Combicon] |
[Line Combicon] |
||
Signal |
4 |
3 |
2 |
1 |
Pin |
[S + -] |
[S + -] |
[S + -] |
[S + -] |
Balanced |
Hot: to + |
|
Unbalanced |
Hot: to + |
|
Cold: to - |
|
|
Link to Shield: to - |
|
Shield: to S |
|
|
Shield: to S |
Page 1 of 2
BSS AUDIO | 8760 S. Sandy Parkway | Sandy, UT 84070 U.S.A | Ph. +1 - 801-566-8800 | Fax +1 - 801-566-7662
Loading...