Bryston BP26 Owner's Manual
and
MPS2
The lightning flash with arrowhead symbol within an equilateral triangle, is intended to
alert the user to the presence of un-insulated “dangerous voltage “ within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to per-
sons.
The exclamation point within an equilateral triangle is intended to alert the user to the
accompanying the product.
2.
3.
4.
5.
6.
Clean only with dry cloth.
7.
tions.
8.
tus (including amplifiers) that produce heat.
9.
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provid
ed plug does not fit into your outlet, consult an electrician for replacement of the obsolete out
Only use attachments/accessories specified by the manufacturer.
or sold with the apparatus. When a cart is used use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
time.
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
“WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE”.
“DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ARE PLACED ON THE EQUIPMENT”.
“TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
“THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE”.
BP26 Preamplifiers
20Hz-20kHz +/- .05dB
Sensitivity:
500 mV
-100dB (Ref. 500mV unbalanced input, 20-20kHz)
-103dB (Ref. 1 volt balanced input 20-20kHz)
XLR Connector Pin out (Balanced I/O):
2 pair balanced female XLR inputs
5 pair RCA inputs
4 pair RCA + 1 pair phono inputs (BP26P & BP26MC
only)
4 pair RCA + 2 SPDIF digital inputs (BP26 DA only)
2 pair RCA outputs
Options:
Silver faceplate & hand held remote (std. is black)
Standard version:
43.18cm x 5.7cm x 28cm
48.26cm x 4.44cm x 28cm
Weight:
actual:
shipping:
Weight:
actual:
shipping:
/50-60Hz/90W
/60Hz/90W
200V
/50-60Hz/90W
220V
/50-60Hz/90W
230V
/50-60Hz/90W
240V
/50-60Hz/90W
Outputs:
±37V/250mA
Additional Specifications for BP26DA:
Word Length:
SPDIF standard
Signal to Noise Ratio:
20Hz-20kHz +/- .1dB
Additional Specifications for BP26P:
or combination of frequencies from 20-
20kHz, at rated output or below.
Phono: -80dBA referred to an input of 5
Within less than +/- 0.05dB from 20-
20kHz inclusive
5mV
Additional Specifications for BP26MC
<0.005%, 20-20kHz, with preamplifier driven
to full rated output
quivalent to approximately 1000 ohm metal
film register (Thermal noise greater than 85dB
Gain
Below 5Hz to above 30kHz, with-
350uV (0.35mV)
2
Loading...