Bryant ASPAS1BBA007, ASPAS1BBA012, ASPAS1BBA015 User Manual

Home Standby - 7kW - 12kW - 15kW



INNOVATIVE DESIGN & PROTOTYPE TESTING are key components
of BRYANT’s success in “IMPROVING POWER BY DESIGN.” But it
doesn’t stop there. Total commitment to component testing, reliability
testing, environmental testing, destruction and life testing, plus testing
to applicable CSA, NEMA, EGSA, and other standards, allows you to
choose BRYANT with the confidence that these systems will provide
superior performance.



TEST CRITERIA:

>

PROTOTYPE TESTED

>

SYSTEM TORSIONAL TESTED

>

NEMA MG1-22 EVALUATION

>

MOTOR STARTING ABILITY



SOLID-STATE, FREQUENCY COMPENSATED VOLTAGE
REGULATION. This state-of-the-art power maximizing regulation

system is standard on all BRYANT models. It provides optimized
FAST RESPONSE to changing load conditions and MAXIMUM
MOTOR STARTING CAPABILITY by electronically torque-matching the
surge loads to the engine.



SINGLE SOURCE SERVICE RESPONSE from BRYANT’s dealer
network provides parts and service know-how for the entire unit, from
the engine to the smallest electronic component. You are never on
your own when you own a BRYANT system.



BRYANT TRANSFER SWITCHES. Long life and reliability are
synonymous with BRYANT systems. One reason for this confidence is
that the BRYANT product line includes its own transfer systems and
controls for total system compatibility.

FEATURES

Air-Cooled Gas Engine Generator Sets

Continuous Standby Power Rating Model ASPAS1BBA007 - 7kW 60Hz

Model ASPAS1BBA012 - 12kW 60Hz
Model ASPAS1BBA015 - 15kW 60Hz

INCLUDES:

• Automatic Transfer Switch
with Built-In Emergency Load Center

• Pre-wired External Connection Box

• Flexible Fuel Line

• Composite Mounting Pad

• Pre-wired conduits

• Natural Gas or LP Gas Operation

• GFCI duplex outlet & 12Vdc outlet

• UL Listed to Canadian safety standards

• 2 Year Limited Parts and Labor Warranty

HOME STANDBY SPECIFICATIONS Home Standby - 7kW - 12kW - 15kW

• Durable (OHVI) Design

• ”Spiny-lok” cast iron cylinder walls

• Electronic ignition, spark advance and
compression release

ENGINE

• Full pressure lubrication system

• Low oil pressure shutdown system

• High temperature shutdown

• Revolving field

• Skewed stator

• Displaced phase excitation

• Automatic voltage regulation

GENERATOR

• UL 2200 Listed

• Fully Automatic

Maximizes engine “breathing” for increased fuel efficiency. Cylinder walls run cooler, reducing
oil consumption. Because heat is the primary cause of engine wear, the OHVI has a significantly
longer life than competitive engines.

Rigid construction and added durability provide long engine life.

These features combine to assure smooth, quick starting every time.

Superior lubrication to all vital bearings means better performance, less maintenance and significantly
longer engine life.

Superior shutdown protection prevents catastrophic engine damage due to low oil.

Prevents damage due to overheating.

Allows for smaller, light weight unit that operates 25% more efficiently than a revolving armature generator.

Produces a smooth output waveform for compatibility with electronic equipment.

Maximizes motor starting capability. Provides more surge capability than brushless generator designs.

Regulates the output voltage to ±2% prevents damaging voltage spikes.

For your safety

Transfers your vital electrical loads to the energized source of power.

• Remote Mounting

SWITCH

• UL Listed

TRANSFER

• Manual/Auto/Off switch

• Utility voltage sensing

• Utility interrupt delay

• Engine warm-up

• Engine cool-down

• Seven day exerciser

• Timed Trickle Battery charger

• Main Line Circuit Breaker

MICROPROCESSOR CONTROL

• Weather protective enclosure

• Enclosed critical grade muffler

UNIT

Mounts near your existing distribution panel for simple, low cost installation.

For your safety

Selects the operating mode.

Constantly monitors utility voltage, setpoints 60% dropout, 80% pick-up, of standard voltage.

Prevents nuisance start-ups of the engine, set point approximately 15 seconds.

Ensures engine is ready to assume the load, set point approximately 10 seconds.

Allows engine to cool prior to shutdown, setpoint approximately 1 minute.

Operates engine to prevent oil seal drying and damage between power outages.

Maintains battery amperage to insure starting.

Protects generator from overload.

Ensures protection against mother nature. Hinged key locking roof panel for security.
Electrostatically applied epoxy paint for durability.

Quiet, critical grade muffler is mounted inside the unit to prevent injuries.

• Small, compact, attractive

• Pre-wired External Connection Box

• 1’ Flexible Fuel Line

• Composite Mounting Pad

• Pre-wired conduits

SYSTEM

• UL Listed wire nuts

INSTALLATION

Makes for an easy, eye appealing installation.

Easy Installation - Virtually all hardware included, plus step-by-step photographed Installation Guide.