Bryant 986TA60080V21, 986TA30040V14, 986TA42060V17, 986TA48080V17, 986TA60100V21 Product Data

986TA
EVOLUTIONR TWO--STAGE
4--WAY MULTIPOISE, VARIABLE SPEED
CONDENSING GAS FURNACE, SERIES A

Product Data

A11264

The 986TA Multipoise Variable--Speed Condensing Gas Furnace is
features the two--stage EvolutionR System. The Perfect HeatR
technology two--stage gas valve is at the heart of the comfort
provided by this furnace, along with the variable--speed ECM
blower motor, and two--speed inducer motor. With an Annual Fuel
Utilization Efficiency (AFUE) up to 96.5%, the Evolution
two--stage gas furnace provides exceptional savings as well when
compared to standard gas furnaces. This Evolution Gas Furnace
also features 4--way multipoise installation flexibility, and is
available in six model sizes. The 986TA can be vented for direct
vent/two--pipe, ventilated combustion air, or single--pipe
applications. A Bryant Evolution Control and Evolution Air
Conditioner or Heat Pump, can be used to form a complete
Evolution System. All units meet California Air Quality
Management District emission requirements. All sizes are design
certified in Canada.

STANDARD FEATURES

S EvolutionR System; compatible with single--zone Evolution

systems.

S Evolution Features—match with the Evolution Control for

Evolution System benefits.

S All sizes meet ENERGY STARR Version 4.0 criteria for gas

furnaces: 95+AFUE; AMACF electrical rating; 2% or less
cabinet airflow leakage.

S Quiet operation. Comparefor yourself at HVACpartners.com.

S Ideal height 35” (889 mm) cabinet: short enough for taller coils,

but still allows enough room for service.

S Silicon Nitride Perfect Light™ Hot Surface Igniter.
S SmartEvap™ technology helps control humidity levels in the

home when used with a compatible humidity control system.

S FanOn Plus™technology allows control of continuous fan speed

from a compatible thermostat.

S External Media Filter Cabinet included.
S 4--way multipoise design for upflow, downflow or horizontal

installations, with unique vent elbow and optional through-­the--cabinet downflow venting capability.

S Full--featured variable--speed blower motor, two--speed inducer

motor, and two--stage gas valve.

S Self--diagnostics and extended diagnostic data through the

Advanced Product Monitor (APM) accessory or Evolution User
Interface.

S Adjustable blower speed for cooling, continuous fan, and

dehumidification.

S Aluminized--steel primary heat exchanger.
S Stainless--steel condensing secondary heat exchanger.
S Propane convertible (See Accessory list).
S Factory--configured ready for upflow applications.
S Fully--insulated casing including blower section.
S Convenient Air Purifier and Humidifier connections.
S Direct--vent/sealed combustion, single--pipe venting or

ventilated combustion air.

S Installation flexibility: sidewall or vertical vent.
S Residential installations may be eligible for consumer financing

through the Retail Credit Program.

S Certified to leak 2% or less of nominal air conditioning CFM

delivered when pressurized to 1--in. water column with all
present air inlets, air outlets, and condensate drain port(s) sealed.

LIMITED WARRANTY*

S 10 year partsand lifetime heat exchanger limited warranty to the

original purchaser upon timely registration.

S Limited warranty period is five years for parts and twenty years

for the heat exchanger if not registered within 90 daysof
installation.{

* For owner occupied, residential applications.

{Jurisdictions where warranty benefits cannot be conditioned on registra-

tion will receive registered limited warranty benefits.

CERTIFIED

Use of the AHRI Certified TM Mark indicates a
manufacturer’s participation in the program. For
verification of certification for individual products,
go to www.ahridirectory.org.

1

Always Ask For

CASING

DIMENSIONS

SAP ORDERING

NO.

986TA30040V14 35 29.5 14.2 39,000 25,000 96.5% 660 815 0.10 440 - 905 1/2 16 121
986TA42060V17 35 29.5 17.5 58,000 38,000 96.3% 860 1135 0.12 435 - 1475 3/4 16 142
986TA48080V17 35 29.5 17.5 78,000 50,000 96.2% 1160 1505 0.15 555 - 1610 3/4 16 152
986TA60080V21 35 29.5 21.0 78,000 51,000 96.5% 1200 1555 0.15 440 - 2005 1 20 156
986TA60100V21 35 29.5 21.0 97,000 63,000 96.1% 1435 1865 0.20 405 - 2005 1 20 166
986TA66120V24 35 29.5 24.5 117,000 76,000 96.5% 1675 2375 0.20 480 - 2115 1 24 190

{Capacity in accordance with DOE test procedures. Ratings are position dependent. See rating plate.

‡Minimum heat CFM when low ---heat rise adjustment switch (SW 1 ---3) and comfort/efficiency adju stment switch (SW1 - -- 4) on control center are OFF.

ESP --- External Static Pressure

(IN.)

H D W High Low AFUE

RATED HEATING OUTPUT{

(BTUH)

CFM‡

(Low

Heating)

HEATING

CFM

(High

Heating)

Rated

High

Heating

ESP

COOLING

CFM @ 0.5

ESP

MOTOR

HP

(VARI-

ABLE

SPEED)

MEDIA

CABINET

SUPPLIED

(IN.)

Full-Featured, Variable Speed Motors — Our Deluxe ECM

FEATURES AND BENEFITS

Perfect HeatR Technology — This feature with Adaptive Control

is a proprietary function that promotes homeowner comfort
through two stages of heating. This Bryant furnace offers a

986TA

patented algorithm that continually monitors and adjusts furnace
operation by looking at both current and past conditions to
determine the most effective stage of heating and the amount of
time to run each stage, every cycle.

Perfect HumidityR Technology — The Perfect Humidity system
actively controls both temperature and humidity in the home to
provide the best comfort all year long. Other systems depend on
heating or cooling demand to manage the moisture in the air. But,
Perfect Humidity gives the homeowner the right amount of
humidity day and night, even in mild weather. No other
manufacturer can do this! Perfect Humidity saves energy, too. By
keeping humidity under control, the homeowner can set their
thermostat lower to stay comfortable and save energy.

SmartEvapt Technology — When paired with a compatible
thermostat, this dehumidification feature overrides the cooling
blower off-delay when there is a call for dehumidification. By
deactivating the blower off-delay, SmartEvap technology prevents
condensate that remains on the coil after a dehumidification cycle
from re-humidifying throughout the home. This results in reduced
humidity and a more comfortable indoor environment for the
homeowner.

Unlike competitive systems, SmartEvap technology only overrides
the cooling blower off delay when humidity control is needed.
Once humidity is back in control, SmartEvap re-enables the
energy-saving cooling blower off-delay.

FanOnPlust Technology — Sometimes the constant fan setting
on a standard furnace system can actually reduce homeowner
comfort by providing too much or too little air! Fan On Plus
technology improves comfort all year long by allowing the
homeowner to select the continuous fan speed of their choice using
a compatible thermostat.

HYBRID HEATR Dual Fuel system — This system can provide
more control over your monthly energy bills by automatically
selecting the most economical method of heating. With HYBRID
HEAT, our system automatically switches between the gas furnace
and the electric heat pump as outside temperatures change to
maintain greater efficiency and comfort than with any traditional
single-source heating system. The heat pump also delivers
high-efficiency cooling in the summer.

Power Heatt Igniter — Bryant’s unique SiN igniter is not only
physically robust but it is also electrically robust. It is capable of
running at line voltage and does not require complex voltage
regulators as do other brands. This unique feature further enhances
the gas furnace reliability and continues Bryant’s tradition of
technology leadership and innovation in providing a reliable and
durable product.

(Electronically Commutated Motor) provides variable-speed
operation to optimize comfort levels in the home year round;
features such as passive/active dehumidification, ramping profiles,
and quiet operation. They can provide cooling match
enhancements to increase the effective SEER of select Bryant air
conditioner or heat pump system. This motor does not report back
RPM and static pressure to enable static pressure reporting to the
UI or zoning system, which is required for zoning, active filter
monitoring and system static pressure reporting.

Reliable Heat Exchanger Design — The aluminized steel,
clamshell primary heat exchanger was reengineered to achieve
greater efficiency out of a smaller size. The first two passes of the
heat exchanger are based on the current 80% product, a design
with more than ten years of field-proven performance and success.
These innovations, paired with the continuation of a crimped,
no-weld seam create an efficient, robust design for this essential
component.

The condensing heat exchanger, a stainless steel fin and tube
design, is positioned in the furnace to extract additional heat.
Stainless steel coupling box componentry between heat exchangers
has exceptional corrosion resistance in both natural gas and
propane applications.

Media Filter Cabinet — Enhanced indoor air quality in the home
is made easier with our media filter cabinet—a standard accessory
on all deluxe furnaces. When installed as a part of the system, this
cabinet allows for easy and convenient addition of a Bryant high
efficiency air filter.

4-Way Multipoise Design — One model for all applications –
there is no need to stock special downflow or horizontal models
when one unit will do it all. The new heat exchanger design allows
these units to achieve the certified AFUE in all positions.

Direct or Single-pipe Venting, or Optional Ventilated
Combustion Air

— This furnace can be installed as a 2-pipe
(Direct Vent) furnace, in an optional ventilated combustion air
application, or in single-pipe, non-direct vent applications. This
provides added flexibility to meet diverse installation needs.

Sealed Combustion System — This furnace brings in combustion
air from outside the furnace, which results in especially quiet
operation. By sealing the entire combustion vestibule, the entire
furnace can be made quieter, not just the burners.

Insulated Casing — Foil-faced insulation in heat exchanger
section of the casing minimizes heat loss. The acoustical insulation
in the blower compartment reduces air and motor noise for quiet
operation.

Monoport Burners — The burners are specially designed and
finely tuned for smooth, quiet combustion and economical
operation.

Bottom Closure — Factory--installed for side return; easily
removable for bottom return. The multi-use bottom closure can
also serve for roll-out protection in horizontal applications, and act
as the bottom closure for the optional return air base accessory.

APPROX.
SHIP WT.

(LB)

2

Certifications — This furnace is CSA (AGA and CGA) design
certified for use with natural and propane gases. The furnace is
factory--shipped for use with natural gas. A CSA listed gas

gas. The efficiency is GAMA efficiency rating certified. This
furnace meets California Air Quality Management District
emission requirements.

conversion kit is required to convert furnace for use with propane

SPECIFICATIONS

Heating Capacity and Efficiency 30040 42060 48080 60080 60100 66120

Input High Heat (BTUH) 40,000 60,000 80,000 80,000 100,000 120,000

Low Heat (BTUH) 26,000 39,000 52,000 52,000 65,000 78,000

Output High Heat (BTUH) 39,000 58,000 78,000 78,000 97,000 117,000

Low Heat (BTUH) 25,000 38,000 50,000 51,000 63,000 76,000
Efficiency AFUE % (ICS) 96.5 96.3 96.2 96.5 96.1 96.5
Certified Temperature

Rise Range ºF (ºC)

Airflow Capacity and Blower Data 30040 42060 48080 60080 60100 66120

Certified External Static
Pressure (in. w.c.)

Airflow Delivery @ Rated ESP (CFM) High Heat 815 1135 1505 1555 1865 2375

Cooling Capacity (tons) @ 400, 350
CFM/ton

Direct-Drive Motor Type Electronically Communicated Motor (ECM)
Direct-Drive Motor HP 1/2 3/4 3/4 1 1 1
Motor Full Load Amps 6.8 8.4 8.4 10.9 10.9 10.9
RPM Range 600 - 1200
Speed Selections Variable (PWM)
Blower Wheel Dia x Width in. 11 x 7 11 x 8 11 x 8 11 x 10 11 x 10 11 x 11

Air Filtration System

Filter Used for Certified Watt Data

High Heat

Low Heat

Heating 0.10 0.12 0.15 0.15 0.20 0.20

Cooling 0.5 0.5 0.5 0.5 0.5 0.5

Low Heat 660 860 1160 1200 1435 1675

Cooling 905 1475 1610 2005 2005 2115

CFM/ton 2 3.5 4 5 5 5

CFM/ton 2.5 4 4.5 5.5 5.5 6

40 - 70

(22 - 39)

30 - 60

(17 - 33)

KGAWF1606UFR

40 - 70

(22 - 39)

30 - 60

(17 - 33)

KGAWF1306UFR KGAWF1406UFR

40 - 70

(22 - 39)

30 - 60

(17 - 33)

Factory Supplied Media Cabinet

Field Supplied Filter

40 - 70

(22 - 39)

30 - 60

(17 - 33)

40 - 70

(22 - 39)

30 - 60

(17 - 33)

40 - 70

(22 - 39)

30 - 60

(17 - 33)

KGAWF1506UFR

986TA

Electrical Data 30040 42060 48080 60080 60100 66120

Input Voltage Volts-Hertz-Phase 115-60-1
Operating Voltage Range Min-Max 104 - 127
Maximum Input Amps Amps 7.5 9.2 9.2 11.7 11.8 11.8
Unit Ampacity Amps 10.3 12.4 12.4 15.5 15.6 15.6
Minimum Wire Size AWG 14 14 14 12 12 12
Maximum Wire Length

@ Minimum Wire Size

Maximum Fuse/Ckt Bkr
(Time-Delay Type Recommended)

Transformer Capacity (24vac output) 40 VA
External Control Power

Available

Controls 30040 42060 48080 60080 60100 66120

Gas Connection Size 1/2" - NPT
Burners (Monoport) 2 3 4 4 5 6
Gas Valve (Redundant) Manufacturer White Rogers

Minimum Inlet Gas pressure (in. wc) 4.5

Maximum Inlet Gas pressure (in. wc) 13.6
Gas Conversion Kit - Natural to Propane KGANP5201VSP
Gas Conversion Kit - Propane to Natural KGAPN4401VSP
Manufactured (Mobile) Home Kit not approved for MH use
Ignition Device Silicon Nitride
Limit Control 165 180 170 200 180 160
Heating Blower Control (Heating Off-Delay) Adjustable: 90, 120, 150, 180 seconds
Cooling Blower Control (Time Delay Relay) 90 seconds
Communication System Evolution (non-zoning)
Thermostat Connections R, W/W1, W2 Y/Y2, Y1, G, Com 24V, DHUM
Accessory Connections EAC (115vac); HUM (24vac); 1-stg AC (via Y/Y2)

Feet 36 29 29 37 36 36

(M) (11.0) (8.8) (8.8) (11.3) (11.0) (11.0)

Amps 15 15 15 20 20 20

Heating 24.3 VA

Cooling 34.6 VA

3

986TA

1 - 2

Family/Tier

98

91 - Legacy
92 - Preferred
98 - Evolution

3

Base Eff.

6

0 --- 90 AFUE
3 --- 93 AFUE
5 --- 95 AFUE
6 --- 96 AFUE
7 --- 97 AFUE

4

Htg. Stages

T

S - Single Stage
T - Two Stage
M - Modulating

MODEL NUMBER NOMENCLATURE

5

Major Series

A

Major Series

6 - 7

Clg. Cap.

30

24 - 800 CFM
30 - 1000 CFM
36 - 1200 CFM
42 - 1400 CFM
48 - 1600 CFM
54 - 1800 CFM
60 - 2000 CFM
66 - 2200 CFM
(@ 0.5” ESP)

Not all familes have these models.

8 - 10

Htg. Cap.

040

040=40,000 BTU
060=60,000 BTU
080=80,000 BTU
100=100,000 BTU
120=120,000 BTU

11

Motor

V

S - Standard
E - Energy Efficient
V - Variable Speed

14 - 14.2”
17 - 17.5”
21 - 21.0”
24 - 24.5”

FURNACE COMPONENTS

HOT SURFACE

GAS BURNER

IGNITER

MANUAL RESET
ROLLOUT SWITCH

12 - 13

Width

14

Voltage

Voltage

14

A

15

Features

--

L - Low NOx

16

Minor Series

A

A11163

FLAME
SENSOR

MANUAL RESET
ROLLOUT SWITCH

GAS VALVE

OPERATING INSTRUCTIONS
NOT SHOWN (LOCATED ON
MAIN FURNACE DOOR, SEE
OPERATING INSTRUCTIONS
INSIDE DOOR FIGURE).

ELECTRICAL JUNCTION
BOX (IF REQUIRED,
LOCATION MAY VARY)

BLOWER DOOR
SAFETY SWITCH

FURNACE
CONTROL
BOARD

MAIN LIMIT SWITCH

(BEHIND GAS VALVE)

INDUCER MOTOR
ASSEMBLY

MEDIA CABINET

BLOWER AND
MOTOR

CAPACITOR/
POWER CHOKE
(IF USED)

RATING PLATE NOT SHOWN

(LOCATED ON BLOWER DOOR)

REPRESENTATIVE DRAWING ONLY, SOME MODELS MAY VARY IN APPEARANCE.

A11408

4

Vent Kit - Through the Cabinet

Venting Accessories

Vent T erm inal - Conc entric

Vent Terminal Bracket

ACCESSORIES

2-in.

3-in.

2-in.

3-in.

Part Number Used With Notes

1llACVB1010CDAGK
KGAVT0701CVT See Venting Tables 1
KGAVT0801CVT See Venting Tables 1
KGAVT0101BRA See Venting Tables 1, 2
KGAVT0201BRA See Venting Tables 1, 2

Freeze Protect Kit - Heat Patch for Drain Trap

Condensate Drainage Accessories

Freeze Protect Kit - Heat Tape

CPVC to PVC Drain Adapter - 1/2-in. CPVC to 3/4-in. PVC

Horizontal Trap Grommet for Direct Vent Applications

Condensate Neutralizer Kit

Ductwork Adapter Accessories

Furnace Base Kit for Combustible Floors

Coil Adapters Kits - Painted

Return Air Base (Upflow applications) - Painted

IAQ Device Duct Adapters (side return) - Painted

Gas Conversion Accessories

Gas Conversion Kit - Nat to LP; Var-spd Products
Gas Conversion Kit - LP to Nat; Var-spd Products

Gas Orifice Kit

No Offset
Single Offsett
Double Offset

14.2-in. wide

17.5-in. wide
21-in. wide

24.5-in. wide

20-in IAQ to 16-in side return
24-in IAQ to 16-in side return

#42 Natural Gas
#43 Natural Gas
#44 Natural Gas
#45 Natural Gas
#46 Natural Gas
#47 Natural Gas
#48 Natural Gas

#54 LP
#55 LP
#56 LP

1.25 mm LP

1.30 mm LP

Part Number Used With Notes

KGACK0101HCK All DV Horizontal -

Part Number Used With Notes

KGARP0301B14 14.2" Wide Furnaces 7
KGARP0301B17 17.5" Wide Furnaces 7
KGARP0301B21 21" Wide Furnaces 7

KGARP0301B24 24.5" Wide Furnaces 7
KGAAD0101MEC 20"x25" IAQ Devices 7
KGAAD0201MEC 24"x25" IAQ Devices 7

Part Number Used With Notes

KGAHA0150N42 All 4, 6

KGAHA0250N43 All 4, 6

84N0561AHAGK

KGAHA0650P54 All 4, 6

KGAHA0850P56 All 4, 6

KGAHA5750125 All 4, 6
KGAHA5750130 All 4, 6

7llAPFC1020THAGK

-llAPFC1010THAGK

-llACVP0110DAAGK

6llA1000-809P

-llALLA1020BSAGK

-llALLA1010ADAGK

-llALLA1020ADAGK

-llALLA1030ADAGK

986TA

-llAPSV1025PNAGK

-llAPSV1044NPAGK

4llA44N0530AHAGK
4llA54N0540AHAGK
4llA64N0550AHAGK
4llA74N0551AHAGK
4llA

4llA55P0570AHAGK

Advanced Product Monitor - APM

Control Accessories

Evolution™ Control U ser Inter face

Zone Perfect Plus: 8-Zone System Kit

Zone Perfect Plus: 4-Zone System Kit
Zone Perfect Plus: 2-Zone System Kit

IAQ Accessories

Filter Pack (6 pack) - W ashable

EZ-Flex Filter

EZ-Flex Filter with End Caps

Cartridge Media Filter

Bryant Perfect Air Purifier

Bryant Perfect Air Purifier Replacement Filter

Bryant Preferred Air Purifier

Bryant Preferred Air Purifier Repl. Filter

16 x 25 x 1
24 x 25 x 1

16-in.
20-in.
24-in.
16-in.
20-in.
24-in.
16-in.
20-in.

24.in.
16 x 25
20 x 25
16 x 25
20 x 25
16 x 25
20 x 25
16 x 25
20 x 25

Part Number Used With Notes

Part Number Used With Notes

EXPXXFIL0016 EZXCAB--1016 3, 5
EXPXXFIL0020 EZXCAB--1020 3, 5

EXPXXFIL0024 EZXCAB--1024 3, 5
EXPXXUNV0016 EZXCAB--1016 3, 5
EXPXXUNV0020 EZXCAB--1020 3, 5
EXPXXUNV0024 EZXCAB--1024 3, 5

FILXXCAR0016 FILCABXL1016 3, 5

FILXXCAR0020 FILCABXL1020 3, 5

FILXXCAR0024 FILCABXL2024 3, 5
GAPAAXBB1625 Up to 1600 CFM 5
GAPAAXBB2025 Up to 2000 CFM 5

GAPBBCAR1625 GAPAAXCC1625-A08 5
GAPBBCAR2025 GAPAAXCC2025-A08 5

PGAPXX1625 Up to 1600 CFM 5, 7

PGAPXX2025 Up to 2000 CFM 5, 7
PGAPAXXCAR1625 GAPAAXBB1625 5, 7
PGAPAXXCAR2025 GAPAAXBB2025 5, 7

Notes:

1. CSA requires that a termination kit be used. See latest PD for pipe and kit size selection. The qualified installer or agency must use only

factory-authorized kits when modifying these furnaces.

2. Not for use with Concentric Vent Termination Kits.

3. Last 2 digits of Part Number indicate filter size.

4. Last 2 digits of Part Number indicate orifice size.

5. Choose IAQ/filter assembly appropriate for the designed system airflow and static pressure. Use optional IAQ Device Duct Adapters as required.

6. Available from Replacement Components group.

7. Kit coming soon. Expected availability 2Q2012.

-llAMPA1030DSAGK

-llAD-10DIUBBXTSYS

-llAB-10TIK8BBENOZ

-llAB-10TIK4BBENOZ

-llAB-10TIK2BBENOZ

5llARFU6031FWAGK
5llARFU6051FWAGK

5