Brother wpa 2, WPA User Manual
Wireless Network Setup Guide
Cutting Machine
Product Code: 893-Z05/Z09
Trademarks
WPA™ and WPA2™ are trademarks of Wi-Fi Alliance®.
Compilation and Publication
Under the supervision of Brother Industries, Ltd., this manual has been compiled and published, covering the
latest product descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained herein
and shall not be responsible for any damages (including consequential) caused by reliance on the materials
presented, including but not limited to typographical and other errors relating to the publication.
Copyright and License
©2020 Brother Industries, Ltd. All rights reserved.
This product includes software developed by the following vendors:
©1983-1998 PACIFIC SOFTWORKS, INC.
©2008 Devicescape Software, Inc.
INTRODUCTION
4
1
3
2
Thank you for purchasing this cutting machine.
This guide provides setup instructions so that you can use a wireless network to send data created in
CanvasWorkspace to your cutting machine (hereafter referred to as “machine”) as well as save data that you
have edited on your machine to CanvasWorkspace. Carefully read the instructions in this guide and complete
the setup to easily transfer data without the need for any device such as a USB flash drive.
Before using this machine, carefully read the “IMPORTANT SAFETY INSTRUCTIONS” in “Product Safety
Guide”.
For basic operations of your machine, refer to “Operation Manual”. The Operation Manual can be downloaded
from <http://s.brother/cmoae/>.
For information on the operations of CanvasWorkspace, refer to the “Help” menu in CanvasWorkspace.
In addition, after you have finished reading this guide, store it where it can quickly be accessed for future
reference.
Transfer Data Using Wireless LAN
With this function, patterns edited in the dedicated application CanvasWorkspace can be transferred to the
machine via a wireless network connection.
For details on transferring pattern data, refer to the Operation Manual.
a Wireless network access point/router
b Computer connected to wireless network access point/router
c Your machine
d CanvasWorkspace server
Perform the setup with the following steps.
a Set up Wireless Network Connection
b Login to CanvasWorkspace Internet version.
• In order to use CanvasWorkspace, a CanvasWorkspace (formerly ScanNCutCanvas) Login ID is necessary. If you do
not have a free account, go to <http://CanvasWorkspace.Brother.com> to create a new account.
c Register machine under CanvasWorkspace.
1
CONTENTS
INTRODUCTION ......................................................................................................................... 1
Transfer Data Using Wireless LAN ............................................................................................... 1
Quick Wireless Network Setup Instructions ................................................................................. 3
Connect Machine to a Wireless Network ..................................................................................... 6
Activate the Wireless Network .................................................................................................................................. 6
Set up the Wireless Network..................................................................................................................................... 6
Check the Wireless Network Setup/Status............................................................................................................... 9
Using the “Others” Menu .......................................................................................................................................... 9
Register Machine Under CanvasWorkspace ............................................................................... 10
Troubleshooting.......................................................................................................................... 13
How can I find the wireless security information (Network Name (SSID) and Network Password)........................ 13
Error codes/Error messages ................................................................................................................................... 13
2
Quick Wireless Network Setup Instructions
For quick and easy instructions on how to set up your wireless network, please follow the steps below.
For more detailed setup procedure, please refer to page 6, and if a connection is not established correctly and
an error message appears, see “Error codes/Error messages” on page 13.
■ Requirements for the wireless network
connection
The wireless network connection complies with IEEE
802.11 n/g/b standards and uses the 2.4 GHz frequency.
The Wireless Network Name (SSID) and Password
(KEY)* for your wireless access point/router are required
to connect your machine to a wireless network.
Find this information and note it first.
Make sure that you have the right password and note
some password are case (upper case & lower case)
sensitive.
Network Name (SSID)
* Your network name selection should match the
wireless network that your PC or mobile device is
connected.
a Turn on the machine.
Network Password
(Network Key)
c Select “ON” for “WLAN Enable”.
d Under “Network” settings screen as shown
below, touch “Setup Wizard”.
Available Network Name (SSID) will be
displayed.
For step e & f please refer to “Requirements for
the wireless network connection” before step
a.
You'll need your Wireless Network Name (SSID) and
Network Password (Network Key).
When the following message appears, touch the
“OK” key.
b Touch in the home screen.
e Select your Network Name (SSID), and then
touch the “OK” key.
f Type in the Network Password (Key), and then
touch the “OK” key.
3
g When the message shown below appears, touch
Note
Memo
a
the “Yes” key.
hWhen a connection is established, the following
message appears, touch the “Next” key.
i Once you have completed reading the message
appears on the following screen, touch the
“Next” key.
l Click in the upper-right corner of the screen.
The page for managing your account appears.
m Click “Machine(s) Registration”.
j After the following screen, describing how to
obtain the PIN code, appears, leave the screen
displayed, and then continue with the following
operation using CanvasWorkspace Internet
version.
a Machine number
k Open CanvasWorkspace Internet version
(http://CanvasWorkspace.Brother.com) on
your computer and then log in.
• First time users should obtain a free account.
• If you already have an account with
CanvasWorkspace (formerly
ScanNCutCanvas), you can use the same login
ID and password to login.
n Click “Register a New Machine”.
o Type in your machine number, and then click
the “OK”.
• Your machine number appears on your
machine in the screen shown in step
describing how to obtain the PIN code.
j
4
Loading...