Brother LN6645001 User Manual

GENERAL PRECAUTIONS

POWER SUPPLY & TAPE CASSETTES

OOO

English

/ Italiano

USER’S GUIDE

www.P-touch.com

LN6645001

Printed in China

INTRODUCTION

With your PT-1000, you can create labels for any application. Select from the many frames, character sizes and styles to design beautiful custom labels. In addition, the variety of tape cartridges available allows you to print labels with different widths and exciting colours. Read this manual carefully before starting and keep the manual in a handy place for future reference.

Declaration of Conformity

We BROTHER INDUSTRIES, LTD.

declare that the Labelling System PT-1000 conforms with the following normative documents:

EMC: EN 55022: 1998 Class B

and follows the provisions of the Electromagnetic Compatibility Directive 89/336/EEC (as amended by 91/263/EEC and 92/31/EEC). The optional AC adapter also conforms with EN 60950 and follows the provisions of the Low Voltage Directive 73/23/EEC.

Issued by: BROTHER INDUSTRIES, LTD.

1-1-1, Kawagishi, Mizuho-ku, Nagoya 467-8562, Japan

EN 55024: 1998

P & H company Development DIV.

• Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark.

• Do not pull on the tape being fed from the P-touch, otherwise the tape cassette may be damaged.

• Do not attempt to cut the tape while printing or feeding since this will damage the tape.

• Do not clean the machine with alcohol or other organic solvents. Only use a soft, dry cloth.

• Remove the batteries and disconnect the AC adapter if you do not intend to use the machine for an extended period of time. Note: If power is disconnected for more than three minutes, all text shown in the dis-

play and any text files stored in the memory will be lost. Language and unit settings will also be cleared.

• Do not put any foreign objects into or heavy objects on the machine.

• Do not expose the machine to extremely high temperatures or high humidity. Never leave it on the dashboard or in the back of your car.

• Avoid using the machine in extremely dusty places. Keep it out of both direct sunlight and rain.

• Do not leave any rubber or vinyl on the machine for an extended period of time, otherwise the machine may be stained.

• Do not touch the print head mechanism. If the head is touched, clean it immediately with a soft wipe (e.g. a cotton swab) to avoid permanent damage.

• To avoid injuries, do not touch the cutter's edge.

• Use only the AC adapter designed exclusively for this machine. Use of any other adapter may void the warranty.

• Please contact your Brother dealer for details.

SPECIFICATIONS

Dimensions: 108 mm (W) ✕ 196 mm (D) ✕ 55 mm (H) Weight: 335 g (without batteries and tape cassette) Power supply: Six AAA size alkaline batteries (LR03) or optional AC adapter

(model G/G1)

Tape cassette: Brother TZ tape

6 mm / 9 mm / 12 mm (width)

Cutter unit: TC-5 (replacement)

Remove the back cover by pressing in the rough area at the top end of the machine.

If a tape cassette is already installed, remove it by pulling it straight up. Also, if batteries are already installed, remove them.

-1 Insert six new AAA-size (LR03) alkaline batteries, making sure that their poles point in

the correct directions.

Always replace all six batteries at the same time using brand new ones.

-2 Insert a tape cassette, making sure that it

snaps into place.

• Make sure that the end of the tape feeds under the tape guides.

• Be sure to remove the paper tab when installing a new tape cassette.

• If the ink ribbon is loose, use your finger to wind the toothed wheel in the direction of the arrow on the cassette.

• Use only Brother TZ tapes with this machine.

Attach the back cover by inserting the two hooks at the bottom into the slots on the

machine, then pushing down firmly on the cover until it snaps into place.

After you have installed the tape, feed the tape (see FEEDING) once and then push in the tape cutter lever to cut the tape.

Optional AC adapter (model G/G1)

Insert the plug on the adapter cord into the

adapter jack on the bottom end of the machine.

Insert the plug into the nearest standard

electrical outlet.

Cutter unit (replacement)

If the cutter blade becomes blunt after repetitive use and the tape can not be cut cleanly, replace with new cutter unit (stock no. TC-5) by obtaining from an authorized brother dealer.

Print head

Tape cutter lever

Cutter unit

Tape exit slot

KEYBOARD & LCD

LCD indicators

Upper case/Lower case

Function

Style

Num keys/Function shortcuts

The LCD shows one row of 8 characters; however, the text that you enter can be up to 55 characters in length.

Power On/Off

Press a to turn on/off the machine. The machine automatically turns off if no key is pressed within 5 minutes.

Size

Underline/Frame

Character keys

Symbol key

Cursor

Power key

Cursor key

Accent key

Print key

Function key

Enter key

Backspace key

Caps key Space key

GETTING STARTED

Start your machine

Supply power by using six AAA batteries or the optional AC adapter, and then press a.

Set the language (English/French/German)

Choose a language with b and press e.

Check the display and press e. (To cancel, press d.)

Set the unit (mm/inch)

Choose a unit with b and press e.

Check the display and press e. (To cancel, press d.)

NOTE: • You can also display the languages and units by pressing the cor-

responding Num keys (1-3).

NOTE:

• To cancel operations, press d.

• To delete entries backward, press d.

• To initialize the settings, turn off the machine and then while hold-

ing down f and d, press a to turn the machine back on. Finally, release f and d.

MAKING TEXT

Switching UPPER CASE/LOWER CASE

" j

Upper case Lower case

ABC

abc

Making TWO LINE TEXT

Move the cursor to where the second line starts and press e.

NOTE: Use either 9 mm or 12 mm wide tape for two line texts.

Display Label image

Entering SYMBOLS

" h > B > b > e

Group Symbols Group Symbols

NOTE: • You can also display the symbols by pressing h / b.

• To go to the next group, press h.

• To skip to a different group, press the corresponding character key of the group.

• You can also scroll the symbols in each group by pressing the corresponding character

key of the group repeatedly.

ABC

abc

ABC DEF

Entering ACCENTED CHARACTERS

" g > E > b > e

Letter

NOTE: • You can also display the characters by pressing g / b.

Accented characters

Letter

Accented characters

• To go to the next letter group, press g.

• To skip to a different letter group, press the corresponding charac-

ter key.

• You can also scroll the characters in each letter group by pressing

the corresponding character key repeatedly.

DESIGNING LABELS

Setting FONT (f+1)

" f > f/b > e > f/b > e

HELSINKI OKLAHOMA

Setting SIZE (f+2)

" f > f/b > e > f/b > e

AUTO automatically adjusts the text size according to the tape width.

SIZE1 SIZE2 SIZE3

SIZE4 SIZE5

NOTE: • Two line texts are printed in SIZE1 regardless of the setting.

• Only AUTO, SIZE1 and SIZE2 can be used on 6mm tapes.

Setting STYLE (f+3)

" f > f/b > e > f/b > e

NORMAL BOLD OUTLINE SHADOW

ITALIC I+BOLD (ITALIC + BOLD) I+OUTL (ITALIC + OUTLINE)

I+SHADOW (

NOTE: • Two line texts are printed in NORMAL regardless of the setting.

ITALIC + SHADOW

• Use clear tape in MIRROR, so the labels appear on the other side when stuck on glass, windows or other transparent surfaces.

) VERTICAL MIRROR

Setting UNDERLINE/FRAME (f+4)

" f > f/b > e > f/b > e

OFF UNDL (Underline) ROUND

BANNER WOODEN VINE

NOTE: No underline or frame is set to texts in VERTICAL style.

Setting TAB (f+5)

You can make aligned texts by setting tabs.

Example: To set a tab between “abc” and “d”

" b > f > f/b > e

Label image

abcd

Tab

NOTE: The cursor should be positioned where you set a tab.

Setting TAB LENGTH (0 - 100mm) (f+6)

" f > f/b > e > b > e

NOTE: You can also select the length by entering the length with Num keys.

Setting LABEL LENGTH

(AUTO/40 - 300mm)

(f+7)

" f > f/b > e > b > e

NOTE: • You can also select the length by entering the length with Num keys.

• To return to AUTO, press any alphabet key or i.

Using AUTO FORMAT (f+8)

You can choose label length from six formats to create labels for various applications.

" f > f/b > e > f/b > e

LCD Application Length LCD Application Length

VCR VHS

FD 3.5" 3.5" Floppy Disk 68mm AUDIO Audio Cassette 89mm

CD CASE

VCR VHS 140mm

CD 100mm VIDEO 8 VCR 8mm (Video 8) 92mm

FILE TAB

File Tab 70mm

To CLEAR (f+0)

All text and settings will be cleared.

" f > f/b > e

PRINTING

TEXT PREVIEW (f+c)

You can preview the text before printing.

" f > f/b > e

NOTE: • The LCD shows the whole text and the label length (mm/inch), then returns to the original

FEEDING (TAPE FEED) (f+i)

" f > f/b > e

PRINTING

" c

NOTE: • To cut off the label, push in the tape cutter lever on the upper-right corner of the machine.

TAPE MARGIN (f+.)

" f > f/b > e > f/b > e

FULL/HALF/NARROW is for leaving equal margins on both sides of the text.

NOTE: Cut along the printed dots (:) with scissors so the text is centred in the label.

FULL HALF NARROW

text.

• Only the text can be previewed, but not the font, style, size, underli ne/frame or any additional features.

• To prevent damage to the tape, do not try to cut while the message PRINT or FEED is displayed.

25mm 25mm

12mm 12mm

4mm 4mm

CHAIN is for printing more than 1 copy of a label with minimum margin <e.g. 1>. You can also create a label containing texts in various styles; print a text in one style, and before feeding, enter the second text in another style <e.g. 2>.

NOTE: FEED THE TAPE BEFORE USING THE CUTTER (see FEEDING/PRINTING). Otherwise

A PART OF THE TEXT MAY BE CUT OFF. Do not try to pull the tape since this may damage the tape cassette.

CHAIN

<e.g. 1> <e.g. 2>

ABCABCABC

(feed&cut)

ABC

ABC DEF

(feed&cut)

Print Option/REPEAT PRINTING (f+,)

You can print up to 9 copies of each label.

" f > f/b > e > f/b >

e > f/b > e

NOTE: • When the tape margin is set to CHAIN, FEED THE TAPE BEFORE USING THE CUTTER

(see FEEDING/PRINTING). Otherwise A PART OF THE TEXT MAY BE CUT OFF. Do not try to pull the tape since this may damage the tape cassette.

• When the tape margin is set to FULL/HALF/NARROW, cut along the printed dots (:) with

scissors to separate the labels.

Print Option/NUMBERING (f+,)

You can print many copies of the same text while increasing a selected number by 1 after each label is printed.

Example: To print copies of a label containing a serial number (0123, 0124 and 0125)

" b > f > f/b > e >

f/b > e > f/b > e

NOTE: • The last number that will be printed must be larger than the number selected in the text,

otherwise the message ERROR appears.

• When the tape margin is set to CHAIN, FEED THE TAPE BEFORE USING THE CUTTER (see FEEDING/PRINTING). Otherwise A PART OF THE TEXT MAY BE CUT OFF. Do not try to pull the tape since this may damage the tape cassette.

• When the tape margin is set to FULL/HALF/NARROW, cut along the printed dots (:) with

scissors to separate the labels.

MEMORY (F+9)

You can store up to 9 frequently used text files and recall them to create labels more quickly and easily.

" f > f/b > e >

To STORE;

" f/b > e > b > e

To RECALL;

" f/b > e > b > e

To DELETE;

" f/b > e > b > e

NOTE: • When the memory is full, delete one or more files and then store the new file.

• You can also choose a file number by pressing the corresponding Num key (1-9).

FUNCTION SHORTCUTS (F+...)

In addition to the basic steps to search for a function, PT-1000 provides you with function shortcuts so you can easily jump to a frequently used function just by pressing shortcut key shown in the table below. To confirm, press

Key

LCD message

FONT Character font

SIZE Character size

STYLE Print style

UNDL/FRM Underline/Frame

TAB Tab setting

TAB LEN Tab length

LENGTH Label length

NOTE: • PRINT OP contains two functions, REPEAT PRINTING and NUMBERING.

• For PREVIEW and FEED, press e to preview/feed after the LCD message appears.

NOTE: You can also refer to the chart indicated on the back of the machine.

Function

Key

8 9 0 . , c i

e (or the shortcut key again).

LCD message

A/F Auto Format

MEMORY Memory

CLEAR Clear text + style

MARGIN Tape margin PRINT OP Repeat/Numbering PREVIEW Text preview

FEED Tape feed

f and the

Function

ERROR MESSAGE LIST

ERROR An error occurred.

BATTERY The batteries are weak.

A T T E R Y The batteries are empty.

FULL

LONG TXT The text length exceeds the selected label length.

The maximum number of characters (55 characters) have already been entered or the memory is full.

TROUBLESHOOTING

Problem Solution

The display stays blank after you have turned on the machine.

The machine does not print, or the printed characters are blurred.

The printed characters are not formed properly.

Striped tape appears. • The tape cassette is empty. Replace it.

The memory has cleared on its own. • The batteries may be weak. Replace them.

A blank horizontal line appears through the printed label.

The machine has “locked up” (i.e., nothing happens when a key is pressed, even though the machine is on).

• Check that the batteries are correctly inserted.

• If the batteries are weak, replace them.

• Check that the adapter is correctly connected.

• Check that the tape cassette has been inserted correctly.

• If the tape cassette is empty, replace it.

• Check that the character size is appropriate for the width of the tape that is used.

• If the batteries are weak, replace them.

• There may be some dust on the print head. Remove the tape cassette and use a dry cotton swab to gently wipe the print head with an up-anddown motion.

• The print head can be cleaned more easily if the optional print head cleaning cassette (TZ-CL3) is used.

• Turn off the machine, and then while holding down

f and d, press a to turn the machine back

on. Finally, release Note: The text and formats in the display and all

text files stored in the memory are erased. Also, the language and unit settings will be cleared.

f and d.