Brother Innov-is 2500D Installation Guide
Version 2
Installation Guide
Guide d'installation
version 2
Guía de instalación
versión 2
ENGLISH
FRANÇAIS
ESPAÑOL
• Read this guide before installing.
• Lisez ce guide avant de procéder à l'installation.
• Antes de instalar, lea este guía.
Thank you for choosing our product.
For additional product information and updates, visit our web site at
http://solutions.brother.com.
The contents of this guide and specifications of this product are subject to
change without notice.
Nous vous remercions d'avoir choisi notre produit.
Pour plus d'informations sur le produit et les mises à jour, visitez notre site
Web à l'adresse http://solutions.brother.com.
Le contenu de ce guide et les spécifications de ce produit peuvent être modifiés sans avis préalable.
Le agradecemos que haya elegido nuestro producto.
Para obtener información adicional del producto y actualizaciones, visite
nuestro sitio Web en http://solutions.brother.com.
El contenido de este guía y las especificaciones de este producto pueden
sufrir cambios sin previo aviso.
CONTENTS
Accessories ................................................................................ 2
Contents of CD-ROM................................................................. 2
Installation Overview ................................................................. 2
Verifying the Operating Environment ......................................... 3
Installation Procedure................................................................. 3
ENGLISH
1
Accessories
Contents of CD-ROM
Check that the following items are provided. If anything
is missing or damaged, contact your authorized dealer
or Brother Customer Service.
• CD-ROM (For details on the contents, refer to the
following.)
• Installation Guide (this guide)
In addition, three presser feet, which are useful for freemotion quilting, and a bobbin cover with a scale for
stitches with a middle (center) needle position are
included with this kit.
• Free-motion quilting foot “C”
This presser foot is used to create better freemotion sewing results with straight stitching.
Be sure to use this presser foot with the straight
stitch needle plate.
• Certification Key Issuing Wizard
• Version 2 Upgrade Kit Operation Manual (PDF)
* Adobe® Reader® or Adobe® Acrobat® Reader® is required
for viewing and printing the Operation Manual.
• Upgrade application for version 2
• Update application for version 1
* For the newest version of 1, visit
http://solutions.brother.com.
Installation Overview
First, use the Certification Key Issuing Wizard on the
enclosed CD-ROM to obtain a certification key. Then,
use the certification key to install the upgrade
application for version 2 on the sewing machine.
In the procedures listed below, indicates
operations performed with the sewing machine and
indicates operations performed with the
computer.
• Free-motion open toe quilting foot “O”
This presser foot is used for free-motion quilting
with a zigzag stitch or for free-motion quilting of
straight stitches on fabric with an uneven
thickness.
• Echo quilting foot “E”
This presser foot is used for free-motion quilting
1/4” or 3/8” away from lines or designs.
• Bobbin cover
The scale on this bobbin cover is a reference for
straight stitches with the needle in the middle
(center) position.
[Step 1] Make a note of the machine
number (NO.).
[Step 2] Insert the CD-ROM into the
computer’s CD-ROM drive, and then
start the Certification Key Issuing
Wizard.
[Step 3] Follow the wizard directions to
obtain the certification key.
[Step 4] Install the upgrade application
for version 2 on the sewing machine.
[Step 5] Restart the sewing machine, and
then enter the certification key.
[Step 6] When the upgrade is finished,
the sewing machine automatically
restarts.
2
Verifying the Operating Environment
Before starting the Certification Key Issuing Wizard,
check that the computer to be connected meets the
following operating conditions.
Computer IBM-PC or compatible computer
Operating System
Windows
XP or Windows Vista
CD-ROM drive Required for installation
Others Internet connection available
and one available USB port
(required to upgrade the sewing
machine)
* IBM is a registered trademark of IBM Corporation in the United
States and other countries.
* Windows is a registered trademark of Microsoft Corporation in the
United States and other countries.
1
Windows 98SE requires a driver. Download the driver from our
*
web site (http://solutions.brother.com). In addition, only
Windows 98 Second Edition can use the driver.
®
98SE*1, Me, 2000,
®
Installation Procedure
The following procedure describes how to upgrade
your sewing machine to version 2.
Note
• If the procedure described below is not fully
completed, your sewing machine cannot be
upgraded to version 2.
• Access to the Internet is required in order to obtain a
certification key.
Make a note of the 10-digit number (machine
a
number) displayed beside “NO.” on P.6 of the
settings screen.
Memo
• Since this number will be entered when a
certification key is obtained, be sure to write it down
correctly.
ENGLISH
Machine
number (NO.)
Note
• If information other than a 10-digit number appears
beside “NO.”, update the sewing machine to version
1.01 or later before installing the upgrade
application. For details on the update procedure,
refer to page 208 of the sewing machine’s Operation
Manual.
• The number that appears beside “NO.” is different
from the serial number (SER. NO.) on the label
attached to the back of the sewing machine.
3
Insert the CD-ROM into the computer’s CD-
b
ROM drive.
®
Windows Vista
users only
After a short while, the Auto Play dialog box
automatically appears.
Open drive D (when drive D is the CD-ROM
c
drive) of Computer (My Computer), doubleclick , to start the Certification Key Issuing
Wizard.
Read the information that appears, and then
e
click Next.
Type in the 15-digit CD key found on the label
f
attached to the CD case of the upgrade kit, and
then click Next.
Memo
• The following procedure can be used to start the
Certification Key Issuing Wizard.
1. Click Start.
2. Click Run.
→ The Run dialog box appears.
3. Type in the path (D:\KeyWizard2.exe) to the
application file, and then click OK.
→ The Select Language dialog box automatically
appears.
Select the desired language, and then click
d
OK.
→ Version 2 Certification Key Issuing Wizard appears.
If the following message appears
Check for the following. To close the message,
click OK.
• Are symbols or characters other than letters and
numbers entered?
• Has the number “1” or the uppercase letter “I” been
incorrectly entered?
• Has the number “0” or the uppercase letter “O”
been incorrectly entered?
4
Type in the machine number (NO.) written
g
down in step
a, and then click Next.
If the following message appears
• Check that the CD key and machine number (NO.)
have been entered correctly, and then repeat the
procedure from step
OK.
• The CD key is valid for only one sewing machine.
Check that the CD key has been entered correctly,
and then repeat the procedure from step
close the message, click
c. To close the message, click
c. To
OK.
ENGLISH
If the following message appears
Check that symbols or characters other than
numbers have not been entered. To close the
message, click OK.
Check the entered information, and then click
h
Certify if it has been entered correctly. To
change the entered information, click Back.
• Check the Internet connection, and then click
Certify again. To close the message, click OK.
Write down the 8-digit certification key that
i
appears.
Note
• In order to obtain a certification key, a connection to
the Internet must be established.
→ Connect to the certification server, and then obtain
the upgrade certification key.
Note
• After upgrading the sewing machine to version 2,
the certification key must be entered in the sewing
machine screen.
5
Click Finish.
j
While pressing the “Presser Foot Lifter” button,
k
turn the sewing machine on.
Use USB media or a computer to install the upgrade
application for version 2 on the sewing machine.
If
USB media is to be used, refer to the instructions that
follow.
If a
computer is to be used, refer to page 7.
When using USB media to perform the installation
Copy Upgrade application for version 2 from
l
the CD-ROM to the USB media.
Note
• Do not copy any file other than Upgrade
application for version 2 to the USB media.
Press .
m
Insert the USB media into the USB port
n
connector on the machine.
6
Press .
o
→ When the message Upgrade complete. appears,
installation of the upgrade application is completed.
(If an error occurred, a message appears in red.)
Remove the USB media.
p
Continue with step q on page 8.
When using a computer to perform the installation
Press .
l
Plug the USB cable connectors into the
m
corresponding USB port connectors for the
computer and for the machine.
→ Removable Disk appears in Computer (My
Computer).
ENGLISH
7
Loading...