Brother BRNF13M001 User Manual

B3QBRNF13M001 / 1112C-BRNF13M001 Install Guide

HOST IF ( CN : 8pin FFC or Wireharness)

Pin Name Description
VCC 3.0V ~ 3.6V
NFC_WAKE Wake up from HOST
SDA I2C DATA
GND GND
SCL I2C CLK
GND GND
HOST_WAKE
REG_PU Power un internal LDOs

Install Example

Front View of the product, which contains BRNF13M001

Interrupt to HOST

BRNF13M001 Installatin Area

Remove Cover

Remove BRNF13M001

FFC connected to HOST

BRNF13M001

There is a slit which hold BRNF13M001.

For FCC Requirement

- The product, which contains this module, must be written the following sentence, "Contains Transmitter Module FCC ID: B3QBRNF13M001" or "Contains FCC ID: B3QBRNF13M001".

- The manual of the product, which contains this module, must be written the following sentence.
CLASS A PRODUCT

CLASS B PRODUCT

For IC Requirement

- The product, which contains this module, must be written the following sentence, "Contains Transmitter Module IC: 1112C-BRNF13M001" or "Contains IC: 1112C-BRNF13M001".

- The manual of the product, which contains this module, must be written the following sentence.

The specification of radio wave

The BRNF13M001 is designed for outputting four types of radio waves which are ISO15693,ISO14443- A,B,Felica.
When the BRNF13M001 operates, four types of radio waves are the specifications outputted periodically.
User can't change four types of radio waves.