4.5. Compatibility (iPod)
- iPod 4th Generation (iPod with video)
- iPod Classic (80G, 120G and 160G)
- iPod nano 3rd Generation
- iPod nano 4th Generation
- iPod Touch
- iPod Touch 2G
- iPhone 2G
- iPhone 3G
- iPhone 3Gs
4.6. Operation Mode and Sequence:
- See the below Definition and State Diagram for your reference
- Short Key Press:
Pressed the Key (on unit or remote) snappily, less than 2s
- Long Key Press:
Hold the Key (on unit or remote) for more than 2s
- Holding Key Press:
Hold the Key (on unit) for more than 5s
- No Key Activity:
No Key had been pressed within 5 mins
- Volume (Levels):
Digital volume control (32 levels)
Vo lume Bar Display, and it will overlap the current Screen Content for 2 second in
any condition, once the Volume btns being pressed
First Power up default Volume: level 11 & and last volume setting memory
Gradually Ramp up the volume from volume 0 (Mute) to the last volume setting
when powered “On” or “Un-mute”
Ramp up Speed: no delay for level 0-5; 200ms / step for level 6-32
Showing the Clock instead of the Volume level during Ramp up
When user interrupts by pressing volume “Up / Down / Mode change / Mute”, it
will stop and follow the user’s new setting.
- Page up/down:
Dynamitic Page up/down with 3 different Speeds for Page up/down
Holding press Courser up/down to active the Page up/down feature
First 10 pages with Normal Speed
Second 10 pages with Faster Speed
Third 10 pages with Fastest Speed
- Source selection in Main Menu:
i) iPod
ii) Aux-1
iii) Aux-2
Default mode when Power ON the speaker in the first time= “Main Menu”
Entry to the pervious mode, when the Speaker is turned ON from Standby mode.
- Wireless Connection:
One to One Connection
Auto Scan Clear Station and Remote Pairing
Auto Reconnection, when turn ON
- Sleep:
Count Down until shut off at the selected time (15 mins, 30 mins, 45 mins, 60
mins, OFF)
Power Off (Standby) button will override the Sleep feature to OFF