Broan Best PK22 Specification Sheet

Specially designed to be installed in custom canopy hoods for use over residential commercial-style cooking surfaces.
FEATURES
Italian design
Cabinet mount – custom application
Finish: 304 Stainless Steel #3 Brushed
Widths: 29-13/16”, 38-7/16”
8” round duct connector/backdraft damper
Halogen lighting (2 bulbs included on 29-13/16” hood or 4
bulbs on 38-7/16” hood; Type GU10, MR16 shielded, 120 volt, 50 watts max.) Slide controls: on-off, 3-speed
Quiet, dual centrifugal blowers with two high-efficiency
motors produce 1000 CFM Easily accessible, dishwasher-safe aluminum/stainless
steel filters Heat SentryTM - automatically turns blower to high speed
when excess cooking heat is detected
SPECIFICATION SHEET
OPTIONS
Stainless liner (Model Nos. L2936, L2942, L3848, L3854,
L3860) Ambient light panel (Model Nos. ALP36, ALP42, ALP48,
ALP54, ALP60) Exterior blower version (PKEX22) available, providing
600, 900, 1200, or 1500 CFM exhaust
SPECIFICATIONS
VOLTS AMPS CFM SONES DUCT
120 6.23/7.06 1000 10.5 8” round
BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027
REFERENCE QTY. REMARKS Project
Mount range hood so bottom of hood is
24” to 30” above cooking surface.
Location
Architect
Engineer
Contractor
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted in AMCA’s state-of-the-art test laboratory. Sones are a measure of humanly­perceived loudness, based on laboratory measurements.
Submitted by Date
60H 99042853H
PK22 MOUNTING
14-3/4"
26" - 34-11/16"
SIZE OF THE CUT OUT
(TOP VIEW)
1-9/16
1-9/16"
(2) METAL
SCREWS
4-1/2"
8-11/16"
4 SCREWS
(Typical)
METAL OR
OTHER NON-
COMBUSTIBLE
MATERIAL
(Build to Measure)
WOOD OR METAL FLANGE
TO SECURE SIDES OF UNIT
SEE
CUTOUT
DIMENSIONS
FLUSH UNIT TO BOTTOM
OF HOOD
BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027
Loading...