Each Steelcraft unit is thoroughly inspected in our Quality Assurance
department prior to delivery. In the unlikely case that you find any
material or workmanship that affects the units normal operation,
we will repair the unit free of charge within 12 months of purchase.
You are required to present your receipt as proof of purchase.
For all concerns with your product please contact our Customer
Service team.
CUSTOMER SERVICE
1300 303 330 - Australia
0508 688 822 - New Zealand
Please read all the information carefully before using this product.
This warranty does not apply to failure due to improper care,
or normal wear and tear caused by product use. We reserve the
right to inspect the unit. You may be charged for repairs if the product
has been damaged accidentally.
Distributed by:
AUSTRALIA
BRITAX CHILDCARE PTY.LTD.
A Britax International company.
(Incorporated in Victoria)
A.B.N. 55 006 773 600
99 Derby Road, Sunshine,
Victoria 3020, Australia
Phone: (03) 9288 7288
Fax: (03) 9311 5798
Due to our continuing program of development, Britax reserves the right to alter the specifications,
colour or design without any further notice.
The Steelcraft trademark is the property of Britax Childcare Pty. Ltd-Australia.
The Britax trademark is the property of Britax Excelsior Limited - UK.
Visit the Britax website at: http:/www.britax.com.au or email us at custserv@britax.com.au
Due to the variations in the style and design of our products the illustrations used in this instruction
booklet are generic.
12/09 c 2009 Copyright Britax Childcare Pty. Ltd. Australia.
NEW ZEALAND
BRITAX CHILDCARE NZ. Limited.
A Britax International company.
101 Diana Drive, Glenfield,
Auckland 9, New Zealand.
Phone: (09) 443 0102
Fax: (09) 443 0120
SERENITYRocker with toys
KEEP INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE
12
Model 2406A
Art No. 4001100
CARE AND MAINTENANCE
READ THESE INSTRUCTIONS CAREFULLY AND KEEP THEM FOR FUTURE
REFERENCE. THE CORRECT USE AND MAINTENANCE OF THIS PRODUCT IS
ESSENTIAL.
WARNING
TIMES WITH THE CROTCH STRAP. NEVER USE LAP BELT ONLY.
THE CHILD SHOULD BE SECURED IN THE ROCKER AT ALL
WARNINGS
• Follow the manufacturer’s instructions.
• Never leave your child unattended, direct adult supervision is required at all times.
• Ensure your child is secured with a correctly adjusted safety harness.
• Use the harness at all times.
• The weight of the child using this product should not exceed 9kg.
• Do not use accessories other than those supplied and approved by Britax.
• Remove your child from the rocker before moving or transporting.
• When making adjustments to the rocker, always ensure that your child’s body is
clear of moving parts.
• To prevent the risk of the rocker catching fire, do not place it near a radiator, an open
fire or a barbecue.
• Do not place it near loose cords or cables.
• Do not use this rocker if any parts are damaged or broken.
• Do not use this rocker on an elevated or inclined area.
• Do not use this rocker once your child can sit unaided.
• This rocker is not intended for prolonged periods of sleeping.
• This rocker does not replace a cot or a bed. Should your child need to sleep, then it
should be placed in a suitable cot or bed.
• Do not allow children to use the rocker as a toy or interfere with the rocker when in
use.
SAFETY WARNING
THE SUN IS VERY STRONG. DO NOT LEAVE YOUR CHILD EXPOSED TO THE
SUN.
Regularly inspect and maintain your product to ensure the freedom of movements of the
locking devices and security of components.
To prolong the life of your nursery product keep it clean and do not leave it in the direct
sunlight for extended periods of time.
Removable fabric covers and trims may be cleaned using warm water with a household
soap or a mild detergent. Allow it to dry fully, preferably away from direct sunlight.
HELPFUL HINT: When using your rocker at the beach, completely clean it afterwards to
remove any sand or salt from the unit.
DO NOT DRY CLEAN, OR USE BLEACH.
Do not machine wash, tumble or spin dry, unless care labelling on the product permits
these methods.
Non removable fabric covers and trims may be cleaned using a damp sponge with soap
or mild detergent. Allow it to dry completely before folding or storing it away.
In some climates the covers and trims may be affected by mould & mildew. To help
prevent this occurring, do not fold or store the product if it is damp or wet. Always store
the product in a well ventilated area.
To maintain the safety of your nursery product, seek prompt repairs for bent, torn, worn
or broken parts. Use only parts and accessories approved by Britax.
Always check parts regularly for tightness of screws, nuts and other fasteners tighten if required.
THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE.
THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE.
02
www.britax.com.au
www.britax.com.au
11
11. TO FOLD THE ROCKER
PARTS LIST
NOTE: REMOVE THE CHILD FROM THE ROCKER BEFORE FOLDING THE
ROCKER.
Before folding, remove the toy bar and rotate the rear static/rocking bar inside.
A
To fold the rocker, holding the rocker at the front with your left hand, slide the
button (1) across to the right and hold, then lift lever (2) up with your fingers
and push the backrest forward until fully folded.
A-1A-2
2
1
A - Metal frame
B - Fabric seat cover
C - Canopy
D - Toy bar with 3 toys
E - Head pillow
F - Shoulder harness pads
G - Vibration & Sound unit
BCD
A
12. REMOVE THE FABRIC SEAT COVER
A
The fabric seat cover is easily removable for washing.
To remove, unfasten the two safety clips from the underside of the rocker.
Gently pull the seat cover from the metal frame.
Remove the cover from the footrest first, then slide off the seat cover from the backrest.
Place the cover back on by reversing the above process.
NOTE: THE STRAPS ON THE BACK OF THE ROCKER CAN BE ADJUSTED
AS REQUIRED.
10
www.britax.com.au
EFG
www.britax.com.au
03
1. 1. ATTACHING & USING THE VIBRATION & SOUND UNIT
NOTE: ATTACH THE VIBRATION & SOUND UNIT BEFORE UNFOLDING OR
OPENING THE FRAME. The seat cover is not fully attached for this purpose.
TO ADJUST THE SEAT POSITION
10.
NOTE: GREY BUTTON 1 IS A SAFETY LOCK AND LEVER 2 IS THE BACKREST
ADJUSTER.
Batteries are not included. You required 1 size C and 3 size AA batteries.
To insert the batteries, unscrew the battery lid
A
from underside of the unit using appropriate
screwdriver. Place batteries into the correct
position observing the correct polarity and re-fit
the battery lid.
WARNING: NON-RECHAGEABLE BATTERIES
ARE NOT TO BE RECHARGED. ADULT SUPERVISION IS REQUIRED WHEN
CHARGING RECHARGEABLE BATTERIES. USED AND NEW OR DIFFERENT
TYPES OF BATTERIES SHOULD NOT BE MIXED. REMOVE THE BATTERIES
AS SOON AS THEY BECOME EXHAUSTED. SUPPLY TERMINALS FOR
BATTERIES ARE NOT ARE NOT TO BE SHORT CIRCUITTED.
Attach and secure the Vibration & Sound unit into the front base of the frame.
B
Stand the frame upright and slide the Vibration and Sound unit through the
runners and clicking into position as shown.
B-1
C
B-2
Rotate the rear bar into the static position.
A
To assist with backrest adjustment place
one hand on the tube area.
B
There are three positions for the
rocker. To adjust the seat position,
holding the rocker at the side with
one hand, slide the button (1)
across to the right and hold, then
lift lever (2) and adjust the backrest
up or down to the desired position.
Release button and lever when in
desired position.
A
2
1
B
Now pull the front seat cover up and over the
C
Vibration and Sound unit.
04
www.britax.com.au
WARNING: DO NOT ADJUST THE SEAT POSITION WHEN THE CHILD
IS IN THE ROCKER. ONLY PLACE THE CHILD INTO THE ROCKER
ONCE THE SEAT POSITION IS SECURED.
C
www.britax.com.au
09
8. TO ATTACH THE TOY BAR
To attach the toy bar by pushing the ends into position of both sides of the rocker
A
as shown. To remove, simply pull it out.
1. ATTACHING & USING THE VIBRATION & SOUND UNIT (cont.)
Pull all the way down and secure the seat cover by fastening the buckles at the
D
back of the seat
A-1
CIRCULAR END
A-2
SQUARE END
NOTE: ENSURE THAT THE CIRCULAR END IS INSERTED INTO CIRCULAR
HOLE AND THE SQUARE END INTO SQUARE HOLE.
WARNING: DO NOT USE THE TOY BAR AS A HANDLE FOR LIFTING THE ROCKER.
9. TO USE THE STATIC & ROCKING MODE
ABTo set the rocker into a static position, rotate the rear bar to the position
as shown.
To set the rocker into rocking position, rotate the back bar to the position as
shown.
D-1
1: Vibration
(Left: Off, Middle: Low vibration, Right: High vibration)
123
The Nature sound has 4 songs and total time takes around 9 minutes.
The Music sound has 10 songs and total time takes around 12 minutes.
2. TO REMOVE THE VIBRATION AND SOUND UNIT
A
Close the rocker into the folded position. (See section 11, page 10 )
B
Undo the buckles under the seat and pull the front seat cover up and over the unit.
Slightly lift the lever situated on the top of the unit to
release the Vibration and Sound unit and slide it out of
the base.
A
www.britax.com.au
B
A
www.britax.com.au
C
05
3. TO UNFOLD THE ROCKER
To unfold, holding the rocker at the front with one hand,
A
simply pull the backrest backward with the other hand
until fully open.
You should hear a “click” sound as frame locks into
position. The seat is now in the upright position.
WARNING: ENSURE THAT ALL THE LOCKING DEVICE
ARE ENGAGED INTO POSITION BEFORE USE.
6. TO FIT THE SHOULDER HARNESS PADS
To fit the shoulder harness pads, push each
A
A
shoulder harness through pads.
4. TO FIT & USE THE CANOPY
To fit the canopy, put the canopy over the seat, make sure that the plastic lever
A
at the back is not covered by the canopy and then simply slide the clip into both
sides as shown.
To remove, simply pull it out.
B
A-1A-2
To use the canopy, simply push it forward or fold it back.
C
5. TO FIT & ADJUST HEAD PILLOW
Put the shoulder harness through the
A
appropriate harness hole as shown.
Adjust the head pillow height by attaching
B
the loop & hook at the back of the head
pillow.
A
7. TO SECURE YOUR CHILD
WARNING: Use this harness at all times.
A five point harness is provided to restrain
A
your child. To secure the child in the harness,
push buckle prongs (A) and (B) into buckle
housing (C) until the buckle prongs snap
into position. carefully adjust the harness by
pulling the slider (D) until the desired fit is
achieved in the lap, shoulder and crotch straps.
To release the buckle, squeeze the top and
bottom prongs..
B
Put the crotch pad over the buckle housing and snap to close.
B
A
AB
B
06
www.britax.com.au
www.britax.com.au
07
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.