Brinkmann ENDURA User Manual
™
ENDURA
EXTRA-LONG RUNNING SOLAR POWERED L.E.D. GARDEN ACCENT LIGHTS
LEGACY™ & HAMPTON™OWNER’S MANUAL
ASSEMBLY AND OPERATING INSTRUCTIONS
HOW YOUR LEGACY™ & HAMPTON™
SOLAR-POWERED L.E.D. LIGHTS WORK
READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING YOUR SOLAR LIGHT.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
IMPORTANT: The EPA Certified RBRC
Battery Recycling Seal on the nickel-cadmium
(Ni-Cd) battery contained in our product
indicates The Brinkmann Corporation is
voluntarily participating in an industry program
to collect and recycle these batteries at the end
of their useful life, when taken out of service in
the United States or Canada. The RBRC
program provides a convenient alternative to
placing used Ni-Cd batteries into the trash or
the municipal waste stream, which may be
illegal in your area. Please call
1-800-8-BATTERY™ for information on Ni-Cd
battery recycling and disposal bans/restrictions
in your area. The Brinkmann Corporation’s
involvement in this program is part of our
commitment to preserving our environment
and conserving our natural resources.
During the day, the solar panel converts sunlight
into electricity and recharges the battery. At
night, the light turns on automatically using the
electricity stored during that day.
The number of hours the light will stay on is
dependent on your geographical location,
weather conditions and seasonal lighting
availability.
Solar lights do not receive as much direct
sunlight in winter months. Therefore, the
number of hours the light will stay on will be
reduced during winter.
®
®
1
OR
Legacy
Hampton
BEFORE FIRST USE – Pull out to remove the clear plastic strip
with orange sticker in the light fixture to charge battery.
Install your Legacy or Hampton solar lights in direct sunlight and charge for 1012 FULL, SUNNY DAYS. The lights will turn on automatically at night. Allow at
least 10-12 cycles (i.e., 10-12 days and nights of charging and discharging) for
the battery to charge to its full capacity.
The rechargeable Ni-Cd battery must be allowed to fully charge to operate
properly. Partially charging the batteries on a consistent basis will drastically
reduce the life of the batteries.
ASSEMBLY INSTRUCTIONS
Inspect contents of the box to ensure all parts are included and undamaged.
PARTS LIST:
Legacy Light Fixture
1
OR
Hampton Light Fixture
3-Piece Hanging Hook
2
Ground Stake
3
Select a location with full, direct sunlight.
Shady locations will not allow the battery
to charge fully and will reduce the hours of
nighttime light.
1
2
Legacy
Light
Fixture
1
Hampton
Light
Fixture
NOTE: The rechargeable Ni-Cd battery
must be allowed to fully charge
to operate properly. Partially
charging the battery on a
consistent basis will drastically
reduce the life of the battery.
The selected location should not be near a
nighttime light source such as a porch
light or street light, as these might keep
the solar lights from automatically turning
on. The solar lights should not be placed
closer than 5 feet from one another. This
could cause the solar lights to flicker from
the adjacent light source.
3
2
Loading...