Briggs & Stratton Elite 01808 User Manual

Owner’s Manual

Manual del Propietario

Manual No. 193142GS

Revision 3 (09/24/2004)

01808

(3400 PSI)

BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC

JEFFERSON,WISCONSIN, U.S.A.

Questions? Help is just a moment away!

Preguntas? La ayuda es justa un momento lejos!

Call: Pressure Washer Helpline - 1-800-743-4115 M-F 8-5 CT

Llame: Línea Directa del Lavador a Presión - 1-800-743-4115 M-F 8-5 CT

3400 PSI Pressure Washer

TABLE OF CONTENTS

Safety Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Know Your Pressure Washer. . . . . . . . . . . . . . . . . . . . . . . . 5

Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-12

Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

EQUIPMENT

DESCRIPTION

Read this manual carefully and become familiar with your pressure washer. Know its applications, its limitations and any hazards involved.

This manual contains information for a high pressure washer that operates at 3,400 PSI at a flow rate of

4.0 gallons per minute.This powerful, high quality system features large 10” wheels, a pump equipped with an automatic cool down system, chemical injection system, nozzle extension with quick connect nozzles, safety goggles, heavy duty 50’ hose, and more.

Every effort has been made to ensure that information in this manual is accurate and current. However, we reserve the right to change, alter or otherwise improve the product and this document at any time without prior notice.

SAFETY RULES

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

The safety alert symbol ( ) is used with a signal word (DANGER, CAUTION,WARNING), a pictorial and/or a safety message to alert you to hazards. DANGER indicates a hazard which, if not avoided, will result in death or serious injury. WARNING indicates a hazard which, if not avoided, could result in death or serious injury. CAUTION indicates a hazard which, if not avoided, might result in minor or moderate injury. CAUTION, when used without the alert symbol, indicates a situation that could result in equipment damage. Follow safety messages to avoid or reduce the risk of injury or death.

Hazard Symbols and Meanings

The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

WARNING

Fire

Explosion

Toxic Fumes

Hot Surface

Moving Parts

Electrical Shock

Slippery Surface

Fall

Kickback

Flying Objects

Fluid Injection

3400 PSI Pressure Washer

• Keep water spray away from electric wiring or fatal electric shock may result.

Spray contact with electrical wiring can result in electrocution.

WARNING

• Operate pressure washer ONLY outdoors.

• Keep exhaust gas from entering a confined area through windows, doors, ventilation intakes or other openings.

• DO NOT operate pressure washer inside any building or enclosure.

• Use a respirator or mask whenever there is a chance that vapors may be inhaled.

• Read all instructions with mask so you are certain the mask will provide the necessary protection against inhaling harmful vapors.

Running engine gives off carbon monoxide, an odorless, colorless, poison gas.

Breathing carbon monoxide will cause nausea, fainting or death.

Some chemicals or detergents may be harmful if inhaled or ingested, causing severe nausea, fainting or poisoning.

DANGER

• Keep spray nozzle between 8 to 24 inches away from cleaning surface.

• Operate this unit on a stable surface.

• The cleaning area should have adequate slopes and drainage to reduce the possibility of a fall due to slippery surfaces.

• Be extremely careful if you must use the pressure washer from a ladder, scaffolding or any other relatively unstable location.

• Firmly grasp spray gun with both hands when using high pressure spray to avoid injury if gun kicks back.

Use of pressure washer can create puddles and slippery surfaces.

High pressure spray could cause you to fall if you are too close to the cleaning surface.

WARNING

WHEN ADDING FUEL

• Turn pressure washer OFF and let it cool at least 2 minutes before removing gas cap.

• Fill fuel tank outdoors.

• DO NOT overfill tank.Allow space for fuel expansion.

• Keep fuel away from sparks, open flames, pilot lights, heat, and other ignition sources.

• DO NOT light a cigarette or smoke.

WHEN OPERATING EQUIPMENT

• DO NOT tip engine or equipment at angle which causes fuel to spill.

• DO NOT spray flammable liquids.

WHEN TRANSPORTING OR REPAIRING EQUIPMENT

• Transport/repair with fuel tank EMPTY or with fuel shutoff valve OFF.

WHEN STORING FUEL OR EQUIPMENT WITH FUEL IN TANK

• Store away from furnaces, stoves, water heaters, clothes dryers or other appliances that have pilot light or other ignition source because they can ignite fuel vapors.

Fuel and its vapors are extremely flammable an explosive.

Fire or explosion can cause severe burns or death.

WARNING

• NEVER aim spray gun at people, animals or plants.

• DO NOT allow CHILDREN to operate pressure washer.

• NEVER repair high pressure hose. Replace it.

• Keep high pressure hose connected to pump and spray gun while system is pressurized.

• Squeeze trigger on spray gun to relieve trapped pressure, every time you stop engine. Engage trigger lock on spray gun.

The high pressure stream of water that this equipment produces can pierce skin and its underlying tissues, leading to serious injury and possible amputation.

Spray gun retains high pressure when pressure washer is shut down, which can cause injury.

WARNING

• When starting engine, pull cord slowly until resistance is felt and then pull rapidly to avoid kickback.

• If engine starts and fails to continue to run or if increased resistance is felt during starting pull attempts, squeeze trigger on spray gun.

Rapid retraction of starter cord (kickback) will pull hand and arm toward engine faster than you can let go.

Broken bones, fractures, bruises or sprains could result.

WARNING

3400 PSI Pressure Washer

• DO NOT tamper with governed speed.

• DO NOT operate pressure washer above rated pressure.

Excessively high or low operating speeds increase risk of injury and damage to pressure washer.

CAUTION

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR PRESSURE WASHER

• Disconnect spark plug wire from spark plug and place wire where it cannot contact spark plug.

Unintentional sparking can result in fire or electric shock.

WARNING

• DO NOT point spray gun at glass when in jet spray mode.

• NEVER aim spray gun at plants.

High pressure spray may damage fragile items including glass.

CAUTION

• DO NOT wear loose clothing, jewelry or anything that may be caught in the starter or other rotating parts.

• Tie up long hair and remove jewelry.

Starter and other rotating parts can entangle hands, hair, clothing, or accessories.

WARNING

• Always wear eye protection when using this equipment or in vicinity of where equipment is in use.

High pressure spray can cause paint chips or other particles to become airborne.

WARNING

• DO NOT secure spray gun in open position.

• DO NOT leave spray gun unattended while machine is running.

• NEVER use a spray gun which does not have a trigger lock or trigger guard in place and in working order.

• Always be certain spray gun,nozzles and accessories are correctly attached.

A pressure washer produces a high pressure spray which increases risk of injury and damage to unit.

CAUTION

• If you have questions about intended use, ask dealer or contact Briggs & Stratton Power Products.

• NEVER operate units with broken or missing parts, or without protective housing or covers.

• DO NOT by–pass any safety device on this machine.

• Before starting pressure washer in cold weather, check all parts of the equipment to be sure ice has not formed there.

• NEVER move machine by pulling on high pressure hose. Use handle provided on unit.

• Check fuel system for leaks or signs of deterioration, such as chafed or spongy hose, loose or missing clamps,or damaged tank or cap. Correct all defects before operating pressure washer.

• This equipment is designed to be used with Briggs & Stratton Power Products authorized parts ONLY. If equipment is used with parts that DO NOT comply with minimum specifications, user assumes all risks and liabilities.

Improper treatment of pressure washer can damage it and shorten its life.

CAUTION

• DO NOT touch hot surfaces.

• Allow equipment to cool before touching.

• The pressure washer must be at least 5 feet from structures having combustible walls and/or other combustible materials.

• Keep at least 3 feet of clearance on all sides of pressure washer for adequate cooling, maintenance and servicing.

• In the State of California a spark arrester is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. If you equip the muffler with a spark arrester, it must be maintained in effective working order.

Running engines produce heat.Temperature of muffler and nearby areas can reach or exceed 150°F (65°C).

Severe burns can occur on contact. Combustible debris, such as leaves, grass, brush,

ect. can catch fire.

WARNING

3400 PSI Pressure Washer

KNOW YOUR PRESSURE WASHER

Read this owner’s manual and safety rules before operating pressure washer.

Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.

Chemical Injection Siphon/Filter

Air Filter — Protects engine by filtering dust and debris out of intake air.

Automatic Cool Down System — Cycles water through pump when water reaches 125°-155°F.Warm water will discharge from pump onto ground.This system prevents internal pump damage.

Chemical Injection Siphon/Filter — Use to siphon detergent or other pressure washer chemicals into the low pressure stream.

Choke Lever — Prepares a cold engine for starting.

Fuel Valve — Used to turn fuel on and off to engine. Fuel Tank — Fill tank with regular unleaded gasoline. Always

leave room for fuel expansion. High Pressure Hose — Connect one end to the water

pump and the other end to the spray gun. High Pressure Outlet with Quick Connect — To

connect high pressure hose.

Nozzle Extension with Quick Connect — Allows you to switch between five different spray nozzles.

Oil Fill/Dipstick — Check and fill with oil here.

Pressure Control Knob — Varies the pressure of the high

pressure spray.

Pump — Develops high pressure. Recoil Starter — Use for starting the engine manually. Rocker Switch — Set this switch to "On" before using

recoil starter. Set switch to "Off" to switch off engine. Spray Gun — Controls the application of water onto

cleaning surface with trigger device. Includes safety latch. Spray Tips — Chemical injection, 0°, 15°, 25°, and 40°: for

various cleaning applications.

Throttle Lever—Sets engine in starting mode for recoil starter.

Water Inlet — Connect garden hose here.

Spray Gun

Nozzle Extension with

Quick Connect

High Pressure Hose

Throttle Lever

Choke Lever

Fuel Valve

Recoil Starter

Rocker Switch

(on front of engine)

Air Filter

Fuel Tank

Pressure

Control Knob

Pump equipped with Automatic Cool Down System

Water Inlet

Oil Fill/Dipstick

Spray Tips

High Pressure Outlet with Quick Connect

3400 PSI Pressure Washer

ASSEMBLY

IMPORTANT: Read entire owner’s manual before you

attempt to assemble or operate your new pressure washer.

Remove Pressure Washer From

Carton

• Remove the high pressure hose, handle, and parts box included with pressure washer.

• Slice two corners at the end of carton from top to bottom so the panel can be folded down flat, then remove all packing material.

• Roll pressure washer out of carton.

Carton Contents

Items in the carton include:

• Main unit

• High pressure hose

• Handle

• Engine oil

• Safety goggles

• Spray gun with quick connect fitting

• Nozzle extension with quick connect fitting

• Accessory bag (includes the following):

• Owner’s registration card

• Bag containing 5 multi–colored quick connect nozzles

• Maintenance kit

• Owner’s manual

• Engine manual

• Handle hardware, including 4 carriage bolts and

4 flange nuts

If any of the above parts are missing or damaged, call the pressure washer helpline at 1–800–743–4115.

PREPARING PRESSURE

WASHER FOR USE

If you have any problems with the assembly of your pressure washer or if parts are missing or damaged, call the pressure washer helpline at 1-800-743-4115.

To prepare your pressure washer for operation, you will need to perform these tasks:

1. Fill out and send in registration card.

2. Verify oil dipstick has been installed into pump (Figure 1).

3. Attach handle to main unit.

4. Install oil dipstick onto pump.

5. Add oil to engine.

6. Add fuel to fuel tank.

7. Connect high pressure hose to spray gun and pump.

8. Connect water supply to pump.

9. Connect nozzle extension to spray gun.

10. Select and install desired nozzle.

Figure 1 — Pump Dipstick

Pump Oil Dipstick

3400 PSI Pressure Washer

Attach Handle to the Pressure

Washer

Use either a 13mm or adjustable wrench to attach the handle to the pressure washer.

To attach handle to the pressure washer:

1. Slowly tip pressure washer forward and let it gently

rest on front bumper.

2. Align holes on handle with holes on base.

3. Insert carriage bolts provided to hold handle in place

(Figure 2).

4. Secure handle to pressure washer using four provided

flange nuts.

5. Slowly tip pressure washer back in place and insert

multi–colored Spray tips in spaces provided in handle.

Add Engine Oil and Fuel

• Place pressure washer on a level surface.

• Refer to engine owner’s manual and follow oil and fuel recommendations and instructions.

NOTE: Check oil often during engine break–in. Refer to engine owner’s manual for recommendations.

Connect Hose and Water Supply to

Pump

IMPORTANT:To avoid pump damage, you must assemble

the nozzle extension to the spray gun and attach all hoses before you start the engine.

1. Uncoil high pressure hose and attach quick connect

end of hose to base of spray gun (Figure 3). Pull down on collar of quick connect, slide onto spray gun and let go of collar.Tug on hose to be sure of a tight connection.

CAUTION

• Refer to engine manual for oil and fuel fill information.

• Damage to equipment resulting from failure to follow this instruction will void warranty.

Any attempt to crank or start the engine before it has been properly filled with the recommended oil will result in equipment failure.

Figure 2 — Attach Handle to Pressure Washer

3400 PSI Pressure Washer

NOTE: Remove and discard all pump shipping caps before

attaching hoses.

2. Similarly, attach other end of high pressure hose to the high pressure outlet on pump. Pull down on collar of quick connect, slide onto pump and let go of collar. Pull on hose to be sure of a tight connection.

3. Before connecting garden hose to water inlet, inspect inlet screen (Figure 4). Clean screen if it contains debris or replace if damaged. Refer to the section “O-Ring Maintenance” if inlet screen is damaged. DO NOT run pressure washer if inlet screen is damaged.

4. Run water through garden hose for 30 seconds to clean out any debris.Turn off water.

IMPORTANT: DO NOT siphon standing water for the water supply. Use ONLY cold water (less than 100°F).

5. Connect garden hose (not to exceed 50 feet in length) to water inlet.Tighten by hand (Figure 4).

6. Turn ON water and squeeze trigger on spray gun to purge pump system of air and debris.

Checklist Before Starting Engine

Review the unit’s assembly to confirm you have performed all of the following:

1. Make sure handle is secure.

2. Make sure oil dipstick is installed into pump.

3. Check for properly tightened hose connections.

4. Check to make sure there are no kinks, cuts, or damage to high pressure hose.

5. Check that oil has been added to proper level in engine crankcase.

6. Add proper gasoline to fuel tank.

7. Provide a proper water supply (not to exceed 100°F).

8. Be sure to read “Safety Rules” and “How To Use Your Pressure Washer” before using pressure washer.

Inspect inlet screen. DO NOT use if damaged; clean if dirty.

Figure 4 — Connect Garden Hose to Water Inlet

Connect high pressure hose here.

Figure 3 — Connect High Pressure Hose to Spray Gun

CAUTION

• Damage to equipment resulting from failure to follow this instruction will void warranty.

There MUST be at least ten feet of unrestricted garden hose between the pressure washer inlet and any flow shut off device, such as a ‘Y’ shut-off connector or other convenience-type water shut-off valve.

• Always wear eye protection when using this equipment or in vicinity of where equipment is in use.

• Before starting the pressure washer, be sure you are wearing adequate eye protection.

High pressure spray can cause paint chips or other particles to become airborne.

WARNING

3400 PSI Pressure Washer

HOW TO USE PRESSURE

WASHER

If you have any problems operating your pressure washer, please call the pressure washer helpline at 1-800-743-4115.

Pressure Washer Location

Pressure Washer Clearance

The pressure washer must be at least 5 ft. (152 cm) from structures having combustible walls and/or other combustible materials. Leave at least 3 ft. (92 cm) all around pressure washer including overhead, for adequate cooling, maintenance and servicing.

Place pressure washer in a well ventilated area, which will allow for removal of deadly exhaust gas. DO NOT place pressure washer where exhaust gas could accumulate and enter inside or be drawn into a potentially occupied building. Ensure exhaust gas is kept away from any windows, doors, ventilation intakes or other openings that can allow exhaust gas to collect in a confined area (Figure 5). Prevailing winds and air currents should be taken into consideration when positioning pressure washer.

How to Start Engine

The best way to start your pressure washer for the first time is to follow these instructions step–by–step.This starting information also applies if have let the pressure washer sit idle for at least a day.

1. Place pressure washer near an outside water source capable of supplying water at a flow rate greater than

5.0 gallons per minute and no less than 20 PSI at pressure washer end of garden hose.

2. Check that high pressure hose is tightly connected to spray gun and pump. See “Preparing Pressure Washer for Use” for illustrations.

3. Make sure unit is in level position.

4. Connect garden hose to water inlet on pressure washer pump. Turn ON water.

5. Squeeze spray gun trigger until a steady stream of water occurs.

6. Attach nozzle extension to spray gun (Figure 6). Tighten by hand.

7. Select desired quick connect spray tip and insert it into end of nozzle extension (see “How To Use Spray Tips”).

8. Engage trigger lock to spray gun trigger (Figure 7).

9. Start engine according to instructions given in engine owner’s manual. Also see operating instructions tag located on the pressure washer.

Trigger Lock

Figure 7 — Spray Gun with Trigger Lock Engaged

Figure 6 — Connect Nozzle Extension to Spray Gun

CAUTION

• Damage to equipment resulting from failure to follow this instruction will void warranty.

DO NOT run the pump without the water supply connected and turned on.

• Operate pressure washer ONLY outdoors.

• Keep exhaust gas from entering a confined area through windows, doors, ventilation intakes or other openings.

• DO NOT operate pressure washer inside any building or enclosure.

Running engine gives off carbon monoxide, an odorless, colorless, poison gas.

Breathing carbon monoxide will cause nausea, fainting or death.

DANGER

Figure 5 — Pressure Washer Clearance

Exhaust Port

Typical Pressure Washer Shown

3400 PSI Pressure Washer

NOTE:Always keep the throttle lever in the “Fast”

position when operating the pressure washer.

How to Stop Pressure Washer

1. Let engine idle for two minutes.

2. Turn engine off according to instructions given in engine owner’s manual.

3. Squeeze trigger on spray gun to relieve trapped

pressure in hose to avoid injury.

NOTE:A small amount of water will squirt out when

pressure is released.

4. Engage trigger lock on spray gun when not in use.

• When starting engine, pull cord slowly until resistance is felt and then pull rapidly to avoid kickback.

• If engine starts and fails to continue to run or if increased resistance is felt during starting pull attempts, squeeze trigger on spray gun.

Rapid retraction of starter cord (kickback) will pull hand and arm toward engine faster than you can let go.

Broken bones, fractures, bruises or sprains could result.

WARNING

• DO NOT touch hot surfaces.

• Allow equipment to cool before touching.

• The pressure washer must be at least 5 feet from structures having combustible walls and/or other combustible materials.

• Keep at least 3 feet of clearance on all sides of pressure washer for adequate cooling, maintenance and servicing.

Running engines produce heat.Temperature of muffler and nearby areas can reach or exceed 150°F (65°C).

Severe burns can occur on contact. Combustible debris, such as leaves, grass, brush,

ect. can catch fire.

WARNING

• Keep high pressure hose connected to pump and spray gun while system is pressurized.

• Squeeze trigger on spray gun to relieve trapped pressure, every time you stop engine. Engage trigger lock on spray gun.

The high pressure stream of water that this equipment produces can pierce skin and its underlying tissues, leading to serious injury and possible amputation.

Spray gun retains high pressure when pressure washer is shut down, which can cause injury.

WARNING

+ 22 hidden pages