Breville VKJ476 Instruction manual

®
HotCup
water dispenser
boils water in seconds
PRODUCT SAFETY
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Never use a power base other than the one supplied with the appliance.
Never ll the kettle above the MAX marking. If the kettle is overlled, boiling water may be ejected.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied persons
in order to avoid a hazard.
2
! This appliance generates heat during use. Adequate precaution must be taken to
prevent the risk of burns, scalds, res or other damage to persons or property caused by touching the exterior whilst in use or during cooling.
! Never use this appliance for anything other than its intended use. This appliance is for
household use only. Do not use this appliance outdoors.
! Always ensure that hands are dry before handling the plug or switching on the
appliance.
! Always use the appliance on a stable, secure, dry and level surface. ! Never use a power base other than the one supplied with the appliance. ! This appliance must not be placed on or near any potentially hot surfaces (such as a
gas or electric hob).
! Do not use the appliance if it has been dropped, if there are any visible signs of
damage or if it is leaking.
! Ensure the appliance is switched off and unplugged from the supply socket after use
and before cleaning.
! Always allow the appliance to cool before cleaning or storing. ! Never immerse any part of the appliance or power cord and plug in water or any other
liquid.
! Never let the power cord hang over the edge of a work top, touch hot surfaces or
become knotted, trapped or pinched.
! Never leave the appliance unattended when in use. ! Beware of steam coming from the spout or lid especially during relling. Never open
the lid during the boiling cycle.
! Never ll the appliance when it is positioned on the power base. ! Never use the appliance without sufcient water in it for it to operate correctly. ! Never allow the appliance to boil dry. ! Always operate the appliance with a cup or suitable container placed below the
dispensing nozzle.
3
IDENTIFYING THE PARTS
1. Removeable drip tray
No mess, just lift it off the power base and rinse under the tap. Holds over 1 cup of
water before it needs emptying.
2. Removable stainless steel drip tray cover
3. Dispensing nozzle
4. Stop button
Press to immediately stop the boil sequence or to stop water that is being
dispensed.
5. Start button
Press to start the boil sequence.
6. Dispensing control
This control allows you to select the amount of water dispensed by your HotCup
Move it towards for less water or for more water.
7. Lid ap release button
Press to open the lid ap only and ll the water tank.
8. Lid
9. Water chamber
10. Power base
.
4
5
Loading...
+ 11 hidden pages