Breville VKJ160, VKJ137, VKJ270 User Manual

Illuminated Stainless Steel Kettle

Instructions for Use

PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

These instructions refer to the Breville Kettles VKJ137/VKJ160/VKJ270

FEATURES

weq

1 Lid release button

2 Lid

3 Spout with removable, washable,

anti-scale filter (filter not shown)

4 Easy clean, fast boil 3000W

concealed element

The illustrations used in these instructions may differ slightly from the actual unit supplied.

5 360O rotational power base with

cord storage and cable exit

6 On/off switch

7 Illuminated water level window

BEFORE USING YOUR KETTLE

1 Remove any packaging and promotional material from the kettle and

position the kettle on a dry, level, secure work surface away from the edge.

2 Before connecting to a power source, make sure your mains supply voltage

is the same as the one indicated on the base of the appliance. Connect the plug to a suitable power outlet and ensure that the power cord does not overhang the work surface.

3 Remove the kettle from the power base and open the lid by pressing the lid

release button. Fill the kettle to the maximum mark and close the lid.

4 Place the kettle back onto the power base. Ensure the kettle is not over-

filled. Always compare the water level against the maximum water mark, with the kettle positioned on the power base.

5 Turn on the kettle by pressing the ON/OFF switch downwards.

Bring to the boil and then discard the water. Repeat this procedure two more times. This removes any residues from the manufacturing process. Remove and rinse the filter before use. See cleaning the filter section.

WARNING

Do not operate this kettle without the filter fitted.

HOW TO USE

1 Plug the kettle into a suitable power outlet. Ensure that the On/Off switch

is in the Off (up) position.

2 Remove the kettle from the power base and open the lid by depressing

the lid release button.

3 Observe the maximum level indicators marked on the water gauges to

prevent over filling. Fill the kettle with no more than the maximum amount of water, and always ensure that there is sufficient water in the kettle for it to operate correctly. This is approximately 250ml or 1 tea cup full.

4 Close the lid fully to ensure safe operation of the kettle.

WARNING

If this product is filled above the max. level, hot water may be ejected.

✎✎

✎ NOTE

✎✎

To ensure that the kettle is not overfilled, always check the water level with the kettle positioned on its power base.

5 Ensure the kettle is correctly seated on the power base. Switch the kettle

on by pressing the On/Off switch down. The internal chamber of the kettle will illuminate blue and the water will start to boil. When the water reaches boiling point it will automatically switch off and the blue illumination will also turn off.

✎✎

✎ NOTE

✎✎

You can always manually switch off the kettle by switching the On/Off switch to the Off (up) position.

6 Always ensure the kettle is switched off before removing or replacing onto

the base unit.

+ 8 hidden pages