Breville RM-BFP800XL Instruction Book

RM-BFP800XL

the Sous Chef

™

Instruction Book

Breville is a registered trademark of Breville Pty. Ltd. A.B.N. 98 000 092 928.

Due to continued product improvement, the products illustrated/photographed

in this booklet may vary slightly from the actual product.

Models RM-BFP800XL Issue - A12

Breville Consumer Service Center

Website:

brevilleusa.com/certiﬁ ed

Toll Free:

1-855-273-8456

Hours:

8am to 5pm (Paciﬁ c Time)

Monday through Friday, excluding holidays

CONTENTS

Breville recommends safety ﬁ rst

7 Know your Breville

Certiﬁ ed Remanufactured Product

10 Assembling your Breville

Certiﬁ ed Remanufactured Product

15 Basic processing techniques

16 Chopping with the

S Blade™

19 Puréeing with the

S Blade™

20 Mixing with the

S Blade™

22 Kneading with the

dough blade

22 Mini-bowl function

23 Slicing, shredding and

grating with the multi-function discs

26 Whipping with the

emulsifying disc

28 Food processing at a glance

32 Processing tips

33 Care, cleaning & storage

36 Troubleshooting

39 Recipes

CONGRATULATIONS

on the purchase of your

Breville Certiﬁ ed Remanufactured Product

4 5

BREVILLE RECOMMENDS SAFETY FIRST

• Some stiff mixtures, such as dough,

may cause the processing blade to rotate more slowly than normal. If this happens, do not process for longer than 1 minute.

• Do not process hot or boiling liquids –

allow liquids to cool before placing into the processing bowl.

• Do not move appliance while

in operation.

• Do not place any part of the food

processor in a microwave oven.

• Do not ﬁ ll the processing bowl above

the 12 cup liquid level (2.8L) or 16 cup dry level (shredding). Always add drier or thicker ingredients to the processing bowl prior to adding ﬂ uids.

• Never remove the lid while the appliance

is operating. Always use the POWER/ OFF or PAUSE buttons to stop the machine before lid removal.

• Care should be taken when removing

the food from the processing bowl by ensuring the motor and blade/ disc has completely stopped before disassembling. Ensure the POWER/ OFF button has been pressed to switch the motor off and unplug the power cord from the power outlet before removing the lid from the processing bowl. The processing bowl should then be unlocked from the motor body and the blade/disc should be carefully removed before attempting to remove the processed food.

• Do not use harsh abrasive, caustic

cleaners or oven cleaners when cleaning the appliance.

• Strictly follow the care and cleaning

instructions described in this book.

• To avoid possible malfunction of

work bowl switch, never store the food processor with pusher assembly in locked position.

• This appliance is for household use only.

Do not use the appliance for anything other than its intended purpose as described in this book. Do not use outdoors. Do not use in moving vehicles or boats.

• The use of attachments not sold or

recommended by Breville may cause ﬁ re, electric shock or injury.

• Do not leave the appliance unattended

when in use.

• Ensure the motor and blade/disc

have completely stopped before disassembling. Ensure the POWER/OFF button has been pressed to switch the motor off and unplug the power cord from the power outlet when not in use, if left unattended and before assembling, cleaning or storing.

• This appliance is not intended for use

by young children or inﬁ rm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance.

• It is recommended to regularly inspect

the appliance. Do not use the appliance if the power cord, power plug, or appliance becomes damaged in anyway. Immediately cease use and call Breville Consumer Service for examination, repair or adjustment.

• For any maintenance other than cleaning,

call Breville Consumer Service.

• This appliance is equipped with a

power cord having a grounding wire with a grounding plug. The appliance must be grounded using a 3-hole properly grounded outlet. In the event of an electrical short circuit, grounding reduces the risk of electrical shock.

• If the power outlet is a standard

2-prong wall outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

• Do not, under any circumstances, cut or

remove the third (ground) prong from the power cord or use an adapter.

• Consult a qualiﬁ ed electrician if

the grounding instr uctions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.

BREVILLE RECOMMENDS SAFETY FIRST

We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition, we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions:

READ ALL INSTRUCTIONS

• Carefully read all instructions before

operating the appliance for the ﬁ rst time and save for future reference.

• Blades and cutting discs are sharp.

Handle them carefully.

• Remove and safely discard any

packaging materials and promotional labels before using the appliance for the ﬁ rst time.

• To eliminate a choking hazard for young

children, remove and safely discard the protective cover ﬁ tted to the power plug of this appliance.

• To protect against electrical shock, do not

immerse the power cord, power plug or motor base in water or any other liquid.

• Do not place the appliance near

the edge of a bench or table during operation. Ensure the surface is level, clean and free of water. Vibration during operation may cause the appliance to move during use.

• Do not place the appliance on or near

a hot gas or electric burner, or where it could touch any other source of heat.

• Do not use on a sink drain board.

• Always make sure the food processor is

completely assembled before operating. The appliance will not operate unless properly assembled.

• Ensure the POWER/OFF button has

been pressed and the power cord is unplugged from the power outlet before attaching any blade, disc or lid.

• Handle the food processor and

attachments with care. Blades and discs are razor-sharp and should be kept out of reach from children.

• Always secure the processing bowl onto

the motor base before attaching the blades or discs.

• Do not allow the power cord to hang

over the edge of a table or counter, touch hot surfaces or become knotted. Unwind the power cord fully before use.

• Keep hands as well as spatulas and other

utensils away from moving blades or discs while processing food, to prevent the possibility of sever personal injury or damage to the food processor. A plastic spatula may be used, but only when the food processor is stopped. Ensure the POWER/OFF button has been pressed to switch the motor off and remove the power cord from the outlet before removing the lid from the processing bowl.

• Avoid contact with moving parts. Never

push food down by hand when slicing or shredding. Always use pusher.

• Make sure motor has completely

stopped before removing cover.

• Never store any blade or disc on motor

shaft. To reduce the risk of injury, no blade or disc should be placed on the shaft except when the bowl is properly locked in place and the processor is in use. Store blades and discs, as you would sharp knives, out of reach of children.

• Be sure cover and feed tube are

securely locked in place before operating food processor.

• Never try to override or tamper with

cover interlock mechanism.

• Always remove the plug from the

power outlet if the appliance is not in use, before attempting to move the appliance, before cleaning, disassembling, assembling and when storing the appliance.

IMPORTANT SAFEGUARDS

KNOW

your Breville Certiﬁ ed Remanufactured Product

BREVILLE RECOMMENDS SAFETY FIRST

BREVILLE ASSIST™ PLUG

Your Breville appliance comes with a unique Assist™ Plug, conveniently designed with a ﬁ nger hole in the power plug for easy and safe removal from the wall outlet. For safety reasons it is recommended you plug your Breville appliance directly into its own electrical outlet on a dedicated circuit separate from other appliances. If the electric circuit is overloaded with other appliances, your appliance may not function properly. Use in conjunction with a power strip or extension cord is not recommended.

SHORT CORD INSTRUCTIONS

Your Breville appliance is ﬁ tted with a short power supply cord as a safety precaution to prevent personal injury or property damage resulting from pulling, tripping or becoming entangled with a longer cord. Do not allow children to use or be near this appliance without close adult supervision. Longer detachable power supply cords or extension cords are not recommended but may be used if care is exercised. If an extension cord is used, (1) the marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance, (2) the cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally and (3) the extension cord must include a 3-prong grounding plug.

FOR HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS

8 9

A. Small Food Pusher

For improved processing control of smaller ingredients. It also doubles as a measuring cup for adding/measuring ingredients. The food processor will run continually whether the small pusher is in or out.

B. Large Food Pusher

For pushing food down the feed chute. The food processor will not start unless the large pusher is in place correctly.

C. Super Wide Feed Chute D. Processing Lid

Locks onto the processing bowl.

E. PULSE button

Press down and hold brieﬂ y for short bursts of power. The motor will automatically stop after the pulse button has been released.

F. START/PAUSE button G. POWER/OFF button

Provides power to the food processor unit only. Start/Pause is required to be pressed to start operating the food processor.

H. Feed Chute Safety System

Prevents the motor from operating unless the bowl, lid and large food pusher are correctly locked in position.

I. Silicone Seal

Reduces the chance of leakage while processing large volumes of liquid ingredients.

J. Processing Bowl

16 cup bowl for dry ingredients and 12 cups for liquid (wet ingredients). The processing bowl locks onto the motor base.

K. Count-Up & Count-Down Timer

Used to set desired time required for processing. Can count up or down, stopping the processor once the time is reached in count down mode.

L. LCD Display

Displays the timing function.

M. Direct Drive Motor

With safety braking system.

N. Non-Skid Rubber Feet

For added safety and stability.

O. Julienne Disc

Use this disc for julienning vegetables.

P. French Fry/Vegetable Stick Disc

Use this disc for french fries or thick cut vegetables.

Q. Reversible Shredding Disc

Use one side for small/thin shredding and the other side for coarse shredding.

R. Adjustable Slicer

Use this disc for slicing ingredients. Able to slice with 24 settings from 0.3mm – 8mm thick.

S. Emulsifying Disc

Use this attachment for whisking of eggs and cream.

T. Micro-Serrated Universal S Blade

™

Swift action for chopping, mixing, whipping and blending a variety of ingredients.

U. Dough Blade

Blunt blade designed for a softer action of combining dough ingredients.

V. Mini Processing Blade

Used for chopping, mixing, whipping and blending a variety of ingredients.

W. Disc Spindle

Fits onto bowl drive coupling and is u sed to hold the Adjustable Slicer and discs in position. Use Disc Spindle w ith Julienne Disc, French Fr y/Vegetable Stic k Disc, Reversible Shredding Disc, Emulsifying Disc, and Adjustable Slicer.

X. Storage Container

Used for storing blades and disc when they are not in use.

NOT SHOWN

Cleaning Brush

For cleaning the processor bowl, blades and discs. The ﬂ at end is designed as a scraper to remove food particles from crevices.

Plastic Spatula

For scraping the sides of the processing bowl helping to process ingredients evenly.

2.5 Cup Mini Processing Bowl

For processing small volumes of ingredients.

Cord Storage

Cord can be pushed into the housing to reduce length.

Breville Assist

Plug

Ergonomic ring-pull design allows the power plug to be easily removed from the power outlet.

NOTE

Processing bowls and attachments are BPA free.

Your Certiﬁ ed Remanufactured Product may not include all accessories shown. To purchase accessories, call Breville Consumer Service.

KNOW YOUR BREVILLE CERTIFIED REMANUFACTURED PRODUCT

E F

KNOW YOUR BREVILLE CERTIFIED REMANUFACTURED PRODUCT

BEFORE FIRST USE

Before using your Breville Sous Chef™ Food Processor, become familiar with all the parts. Remove all packaging materials and promotional labels, being careful when handling the processing blades and discs as they are very sharp. Wash the processing bowl, processing lid and other attachments in warm, soapy water. Rinse and dry thoroughly. (Refer to cleaning, care and storage section).

1. Place the motor base on a dry, level work

surface. Place the processing bowl on to the motor base with the handle in line with the ALIGN HANDLE graphic on the motor base.

2. Turn the processing bowl clockwise

until the handle aligns with the TURN TO LOCK graphic. The processing bowl should be securely locked into position.

3. If using a disc, ﬁ rst assemble the disc

spindle onto the bowl drive coupling. Orientate the disc so that the side you wish to use is facing upwards. Hold the disc by the center plastic moulding and position the central hole above the disc spindle. Push down ﬁ rmly until ﬁ tted correctly. (Please note that these discs only ﬁ t the larger processing bowl).

4. If using the processing blades, carefully

grasp either the S Blade

™

, dough blade or mini processing blade using the central plastic support and position it over the bowl drive coupling and push down until inserted correctly.

If using the mini processing blade, ensure the mini processing bowl is assembled into the large bowl ﬁ rst.

ASSEMBLING YOUR BREVILLE CERTIFIED REMANUFACTURED PRODUCT

ASSEMBLING

your Breville Certiﬁ ed Remanufactured Product

12 13

The processor incorporates a SAFETY INTERLOCK SYSTEM that ensures the unit will not start without the large food pusher in position. Processing will stop automatically, once the large food pusher has been removed from the lid. The CHUTE FILL MAX graphic indicates the maximum volume of food to be placed in the chute for the pusher to activate the unit.

10. At the end of processing, always

wait until the blades or discs have stopped spinning before unlocking and removing the lid. To remove the processing lid, ensure the POWER/OFF button has been pressed, and the cord is unplugged from the power outlet. Holding the feed chute and pressing down ﬁ rmly at the same time, turn the lid counter-clockwise so that the arrow graphics are no longer aligned.

NOTE

As a safety feature, the food processor will automatically switch off when the lid is unlocked; however, it is good practice to manually switch off the food processor using the POWER/OFF button before removing the lid.

11.

Remove the processing bowl (before removing blade or discs) by turning it counter-clockwise until the handle is in line with the ALIGN HANDLE graphic. Lift the bowl off the motor shaft.

When removing the discs - carefully remove by gripping the plastic hub on the center of the disc and lifting the disc up and away from the pin on the spindle.

NOTE

Reassemble the food processor by locking the processing bowl into position before attaching blade, disc or lid.

NOTE

Care should be taken when removing the food from the processing bowl by ensuring the motor and processing blade or disc has completely stopped before disassembling. Ensure the POWER/OFF button is pressed to switch the motor off, and unplug the cord from the power outlet before removing the lid from the processing bowl. The processing bowl should then be unlocked from the motor body, then the processing blade or disc should be removed before attempting to remove the processed food.

ASSEMBLING YOUR BREVILLE CERTIFIED REMANUFACTURED PRODUCT

5. Place the processing lid onto the

processing bowl so the feed chute is slightly right of the bowl handle and the arrow graphics are aligned

. Holding the feed chute and pressing down ﬁ rmly at the same time, turn the lid clockwise (as indicated by the graphic) so the LOCK ING TABon the lid slots into the INTERLOCKING SAFETY CATCHon the handle. The lid should be securely locked into position.

NOTE

The food processor will not operate unless both the processing bowl and lid are correctly locked into position.

CAUTION

The processing blades (including the mini bowl blade) and discs are extremely sharp, handle with care at all times.

6. Insert the power plug into a 110/120V

power outlet.

7. Press the POWER/OFF button to turn

your food processor on. The red light will illuminate around the POWER /OFF button to indicate that the processor is on.

Press the START/PAUSE button to switch the motor on and operate continuously.

NOTE

The food processor will not start unless the large food pusher is inserted correctly into place.

Press the POWER/OFF button to switch the motor off. When short bursts of power are required, press the PULSE button and hold down brieﬂ y, rele ase, then press again. The PULSE action will automatically stop when the button is released.

8. To set the timer, press the buttons

located to the left of the timing window. Time will move up by 5 second intervals, from 0 to 30 seconds. From 30 seconds to 2 minutes the time will increase in 10 second intervals and from 2 minutes to

9.59 minutes the time will increases in 20 second intervals.

NOTE

If a time is not set, the timer will automatically count up during processing.

Once the time is set, press the START/PAUSE button and the timer will start to count down.

Ensure the large food pusher is inserted correctly into place. The food processor will not start until pusher is in place.

Once the timer has ﬁ nished, the food processor will stop and go into STANDBY mode. Three (3) beeps will sound to indicate that the processing is complete.

ASSEMBLING YOUR BREVILLE CERTIFIED REMANUFACTURED PRODUCT

BASIC FOOD

PROCESSING

TECHNIQUES

for your Breville Certiﬁ ed Remanufactured Product

OVERLOAD PROTECTION SYSTEM

If the motor overloads, the food processor will go to STANDBY mode and the OVERLOAD icon in the LCD will start to ﬂ ash. The food processor can still be switched off by pressing the POWER/OFF button. To operate the food processor again, allow the machine to cool for approximately 30 minutes.

Some stiff mixtures, such as dough, may cause the dough blade to rotate more slowly than normal. If this happens, do not process for longer than 1 minute.

If the blades or discs should jam while processing, ensure the POWER/OFF button is pressed to switch the motor off and then unplug the power cord from the power outlet. Remove the processing lid and adjust any food wedged between the blade and the processing bowl or in the disc. Replace the lid and proceed as normal. If this occurs again, the processing bowl may be overloaded, so remove some of the food and process in smaller batches.

NOTE

The food processor is designed so the motor will not operate without the processing bowl and lid correctly locked into position and the pusher inserted into the feed chute. In the event that the food processor starts without the lid correctly locked into position, immediately disconnect at the power outlet and contact Breville Consumer Service.

ASSEMBLING YOUR BREVILLE CERTIFIED REMANUFACTURED PRODUCT

+ 16 hidden pages

Breville RM-BFP800XL Instruction Book

Specifications and Main Features

Frequently Asked Questions

User Manual