Breville LEM250CCT User Manual

the Scraper Beater
Instruction Book - LEM250
LEM250_BW_IB_B16.indd 1 26/10/2016 1:01 pm
Contents
2 Breville Recommends Safety First 8 Components 10 Assembly 12 Functions 13 Care & Cleaning 14 Troubleshooting 15 Recipes
BREVILLE RECOMMENDS SAFETY FIRST
At Breville we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE
• Carefully read all instructions before operating the Breville bench mixer for the first time and save for future reference.
• Remove and safely discard any packaging material and promotional labels before using the bench mixer for the first time.
• To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this bench mixer.
• Do not place the bench mixer near the edge of a bench or table during operation. Ensure the surface is level, clean and free of water and other substances. Vibration during operation may cause the bench mixer to move.
• Do not use the bench mixer on a sink drain board.
2
LEM250_BW_IB_B16.indd 2 26/10/2016 1:01 pm
• Do not place the bench mixer on or near a hot gas or electric burner or where it could touch a heated oven.
• Always ensure the bench mixer is properly assembled before operating. Follow the instructions provided in this booklet.
• Do not operate the bench mixer with wet hands.
• Ensure the speed control dial is in the OFF position, the bench mixer is switched off at the power outlet and the power cord is unplugged before attaching the attachments (scraper beater, whisk and dough hook attachment).
• Do not use attachments other than those provided with the bench mixer. Use only the attachments and mixing bowl supplied with the bench mixer.
• Do not operate this bench mixer continuously on heavy loads for more than 3 minutes at a time. None of the recipes in this book are considered a heavy load.
• Handle the bench mixer and attachments with care. Never place your fingers inside the mixing bowl or near the attachments during operation.
• The bench mixer can be used for mixing yeast dough. When doing this, fill the mixing bowl with a mass of flour not exceeding 35% of the bowls’ maximum capacity.
• Keep hands, hair, clothing as well as spatulas and other utensils away from the attachment and mixing bowl during operation to reduce the risk of injury to persons and / or damage to the bench mixer.
3
LEM250_BW_IB_B16.indd 3 26/10/2016 1:01 pm
• Should an object, such as a spoon or spatula fall into the bowl while mixing, immediately switch the bench mixer to the OFF position on the speed control dial, turn off at the power outlet and remove the cord from the power outlet, then remove the object.
• Do no place hands in the mixing bowl unless the bench mixer is disconnect from the power outlet.
• Ensure the motor and the attachment has completely stopped before disassembling.
• Always remove the attachment from the bench mixer before cleaning. Care should be taken when removing the food from the mixing bowl by ensuring the motor and the attachment have completely stopped before disassembling.
• Ensure the speed control dial is in the OFF position, the bench mixer is switched off at the power outlet and unplugged before unlocking the bench mixer head and moving into the upright position. The attachment should be released from the mixer head before attempting to remove the processed food from the mixer bowl and the attachment.
• Ensure the bench mixer head is locked into the horizontal (closed) position when not in use and before storing.
• Always ensure the speed control dial is in the OFF position, the power is switched off at the power outlet before attempting to move the bench mixer, before assembling or disassembling the bench mixer, when the bench mixer is not in use and before cleaning or storing.
4
LEM250_BW_IB_B16.indd 4 26/10/2016 1:01 pm
• Always switch off the bench mixer and disconnect from the power outlet before removing attachments, changing accessories or approaching parts that move in use.
• Do not move the bench mixer whilst in operation.
• Do not cover the air vents on the mixer head and mixer stand to avoid overheating.
CAUTION
• In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this bench mixer must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
IMPORTANT
• The use of any accessory attachments not recommended by Breville may cause injuries.
• Do not leave the bench mixer unattended when in use.
• Do not place any part of the bench mixer except the mixing bowl in the dishwasher.
• Keep the bench mixer clean. Follow the Care, Cleaning and Storage instructions provided in this book.
SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES
• Fully unwind the power cord before use.
• Connect only to a 230V or 240V power outlet.
• Do not let the power cord hang over the edge of a bench or table, touch hot surfaces or become knotted.
5
LEM250_BW_IB_B16.indd 5 26/10/2016 1:01 pm
• To protect against electric shock, do not immerse the power cord, power plug or appliance in water or any other liquid or allow moisture to come in contact with the part, unless it is recommended in the cleaning instructions.
• The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• It is recommended to regularly inspect the appliance. To avoid a hazard, do not use the appliance if power cord, power plug or appliance becomes damaged in any way. Return the entire appliance to the nearest authorised Breville Service Centre for examination and/or repair.
• Any maintenance other than cleaning should be performed at an authorised Breville Service Centre.
• This appliance is for household use only. Do not use this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors. Misuse may cause injury.
6
LEM250_BW_IB_B16.indd 6 26/10/2016 1:01 pm
• The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.
• Always turn the appliance to the OFF position, switch off and unplug at the power outlet when the appliance is not in use.
• Before cleaning always turn the appliance to the OFF position, switch off and unplug from the power outlet and remove the power cord, if detachable, from the appliance and allow all parts to cool.
• Do not place this appliance on or near a heat source, such as a hot plate, oven or heater.
• Position the appliance at a minimum distance of 20cm away from walls, curtains and other heat or steam sensitive materials and provide adequate space above and on all sides for air circulation.
FOR HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS
7
LEM250_BW_IB_B16.indd 7 26/10/2016 1:01 pm
Components
K
J I
H
G
A. Mixer head. B. Mixer stand. C. Tilt release lever - Locks the mixer head in
an up or down position.
D. 8 speed control dial - Adjust speed while
mixing.
E. Non-slip suction feet - Increased stability
when mixing.
F. Internal cord storage - Push cord in to
desired length.
G. Bowl locking recess - Holds the mixing
bowl in place during all mixing tasks.
H. Stainless steel mixing bowl - 4.5L bowl with
handle to lift and scrape the bowl with ease.
I. Pouring shield - Minimises splattering.
when mixing and adding ingredients.
A
B C
D
E
F
J. Attachment spindle. K. Overload protection system - Prevents the
motor from overheating.
Attachments (Page 10)
L. Scraper beater attachment. M. Whisk attachment. N. Dough hook attachment.
8
LEM250_BW_IB_B16.indd 8 26/10/2016 1:01 pm
Loading...
+ 16 hidden pages