Breville BSB510XL User Manual

TYPESET V1

the Control Grip

Instruction Booklet

™

Instruction Book - Livret d’instructions

BSB510XL

BSB510XL_IB_A11_FA.indd 2 12/04/11 11:01 AM

TYPESET V1

CONGRATULATIONS

on the purchase of your new

Breville Control Grip™

BSB510XL_IB_A11_FA.indd 2 12/04/11 11:01 AM

CONTENTS

4 Breville recommends safety ﬁrst

6 Know your Breville Control Grip™

8 Assembly and Operation of your

Breville Control Grip

™

9 To use as a Stick Blender 11 To use as a Mini Chopper 13 To use as a Whisk

16 Care, cleaning & storage for your

Breville Control Grip™

18 Food preparation guide for your

Breville Control Grip

™

20 Recipes

33 One Year Limited Warranty

34 French

BSB510XL_IB_A11_FA.indd 3 12/04/11 11:01 AM

BREVILLE RECOMMENDS SAFETY FIRST

We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition, we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions:

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS

• Carefully read all instructions before

operating the appliance for the ﬁrst time and save for future reference.

• Remove and safely discard any

packaging materials and promotional labels before using the appliance for the ﬁrst time.

• To eliminate a choking hazard for young

children, remove and safely discard the protective cover ﬁtted to the power plug of this appliance.

• To protect against electrical shock, do

not immerse the power cord, power plug or motor body in water or any other liquid.

• Do not place the appliance on or near

a hot gas or electric burner, or where it could touch any other source of heat.

• Unwind the power cord fully before use.

• Do not allow the power cord to hang

over the edge of a table or counter, touch hot surfaces or become knotted.

• Always make sure the appliance is

completely and properly assembled before operation.

• Always ensure that the attachments

are securely ﬁtted onto the motor body before operation. Follow the instructions provided in this book.

• Handle the appliance and attachments

with care – blending blade and chopping bowl blade are very sharp. Handle carefully and keep out of reach of children.

• To reduce the risk of injury, always

insert the chopping blade into the chopping bowl, then ensure the lid is securely attached before connecting to the motor body and operating.

• Never process ICE or other hard foods

such as coffee beans, rice, frozen foods, spices, cereal, or chocolate bars in the chopping bowl as damage to the blades may result.

• Do not use attachments other than those

provided with the appliance. The use of attachments not sold or recommended by Breville may cause ﬁre, electric shock or injury.

• Always ensure the appliance is unplugged

from the power outlet before attempting to assemble any of the attachments.

• If using the appliance to blend hot food

in a saucepan, remove the saucepan from the heat source and ensure the liquid is not boiling. Allow hot food to cool slightly before blending. The appliance should be kept away from any heat source.

• Extreme caution must be used when

moving an appliance or container ﬁlled with hot oil or other hot liquids.

• Do not touch surfaces that may be hot.

Use handles or knobs provided.

• When mixing liquids, especially hot

liquids, use a tall container or make small quantities at a time to reduce spillage.

• Keep hands and utensils away from the

moving blending blade and chopping bowl blade while blending/chopping to prevent the possibility of severe injury to persons or damage to the appliance. A spatula may be used, but must be used only when the appliance is not running.

• If food becomes lodged around the

blending blade or in the blade guard, release the trigger switch, unplug the power cord and remove the blending shaft from the motor body. Use a spatula to dislodge the food. Do not use ﬁngers as blending blade is sharp.

BSB510XL_IB_A11_FA.indd 4 12/04/11 11:01 AM

BREVILLE RECOMMENDS SAFETY FIRST

• Do not remove the appliance from

ingredients during operation. Ensure the trigger switch has been released and the motor has completely stopped before removing.

• Avoid contacting moving parts.

• To turn the appliance off, release the

trigger switch and remove the plug from the power outlet.Remove the plug from the power outlet if the appliance is to be left unattended, if not in use, before attempting to move the appliance, before cleaning, disassembling, assembling and when storing the appliance.

• Do not operate this appliance for longer

than 1 minute at a time as this can cause overheating. Allow to cool for at least 1 minute between each use.

• Never mix dry, thick or heavy mixtures

for more than 15 seconds. Stop operation and stir the ingredients before continuing. Allow the motor to rest for 1 minute between each use.

• Strictly follow the care and cleaning

instructions described in this book.

• This appliance is for household use only.

Do not use the appliance for anything other than its intended purpose as described in this book. Do not use outdoors. Do not use in moving vehicles or boats.

• Do not leave the appliance unattended

when in use.

• This appliance is not intended for use

by young children or inﬁrm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance.

• Regularly inspect the power cord, power

plug and actual appliance for any damage. Do not operate if damaged in any way or after the appliance malfunctions. Immediately cease use of and visit www.Breville.com Customer Service at 1-866-BREVILLE for examination, repair or adjustment.

the appliance

or call Breville

• For any maintenance other than

cleaning, visit www.Breville.com or call Breville Customer Service at 1-866-BREVILLE.

BREVILLE ASSIST™ PLUG

Your Breville appliance comes with a unique Assist™ Plug, conveniently designed with a ﬁnger hole in the power plug for easy and safe removal from the wall outlet. For safety reasons it is recommended you plug your Breville appliance directly into its own electrical outlet on a dedicated circuit separate from other appliances. If the electric circuit is overloaded with other appliances, your appliance may not function properly. Use in conjunction with a power strip or extension cord is not recommended.

SHORT CORD INSTRUCTIONS

Your Breville appliance is ﬁtted with a relatively short (6') power supply cord as a safety precaution to prevent personal injury or property damage resulting from pulling, tripping or becoming entangled with a longer cord. Do not allow children to use or be near this appliance without close adult supervision. Longer detachable power supply cords or extension cords are not recommended but may be used if care is exercised. If an extension cord is used, (1) the marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance, (2) the cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally and (3) the extension cord must include a 3-prong

grounding plug.

FOR HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS

BSB510XL_IB_A11_FA.indd 5 12/04/11 11:01 AM

KNOW

your Breville Control Grip™

TYPESET V1

BSB510XL_IB_A11_FA.indd 6 12/04/11 11:01 AM

KNOW YOUR BREVILLE CONTROL GRIP™

A. Speed Control Dial B. Control Grip Trigger Switch C. Motor Body D. Blending Shaft E. Stainless Steel Blending Blade F. Chopping Bowl Lid

G. Chopping Bowl H. Stainless Steel Chopping Blade I. Dual-Purpose Storage Lid &

Anti-Slip Mat

J. Blending Jug K. Whisk

BSB510XL_IB_A11_FA.indd 7 12/04/11 11:01 AM

TYPESET V1

ASSEMBLY & OPERATION

of your Breville Control Grip™

BSB510XL_IB_A11_FA.indd 8 12/04/11 11:01 AM

ASSEMBLY & OPERATION

BEFORE FIRST USE

Remove any packaging material and promotional labels. Remove the blending shaft from the motor body and wash it in warm soapy water (follow the instructions on page 10 “To detach the blending shaft”). Rinse and dry thoroughly. Ensure no water remains inside the blending shaft to avoid water running into the motor body when reattached.

Disassemble and wash the chopping blade, chopping bowl, chopping bowl lid, whisk, storage lid and blending jug in warm soapy water, rinse and dry thoroughly. Ensure no water remains in the chopping bowl lid or whisk attachment to avoid water running into the motor body when reattached.

NOTE

The detachable blending shaft, chopping bowl, chopping blade, blending jug, whisk and dual purpose storage lid/anti-slip mat can also be washed in the dishwasher. The chopping bowl lid, whisk gearbox and motor body are not dishwasher safe – see the care and cleaning section of this booklet for cleaning instructions of these parts.

This stick blender is a versatile appliance that can be attached to:

• The stainless steel blending shaft– for

use as a stick blender

• The chopping bowl with chopping blade

and lid – for use as a mini chopper

• The whisk attachment – for use as a

hand whisk

STICK BLENDER

TO ATTACH THE BLENDING SHAFT

Hold the blending shaft with the blades down, and align the top end of the blending shaft with the corresponding end of the motor body and push until the blending shaft ‘clicks’ and locks onto the motor body.

Always ensure blending shaft is dry with no water left inside before reattaching.

TO USE AS A STICK BLENDER

Ensure the blending shaft is assembled to the motor body as detailed above.

1. Place food to be processed into the

blending jug provided (or a sufﬁciently large mixing bowl or saucepan). The jug provided should only be ½ full or less when blending liquids or when making a puree of fruit and/or vegetables.

2. Insert the plug into a 110/120V

power outlet.

3. By turning the speed control dial at

the top of motor body, select a speed between 1 and 15.

Low Speed : 1 High Speed : 15

NOTE

If selecting a high speed, it is recommended that you start with a slow speed and gradually increase to the higher speed to avoid splattering and over-processing.

4. Place the blending shaft as deeply as

possible into the blending jug and press the trigger switch to turn the stick blender on. The button must be held for the required duration of operation.

BSB510XL_IB_A11_FA.indd 9 12/04/11 11:01 AM

ASSEMBLY & OPERATION

5. Work through the ingredients in

the blending jug with a gentle raising and lowering motion.

6. When processing has ﬁnished switch off

the motor by releasing the trigger switch and remove the power plug from the power outlet.

7. Ensure the blade has completely

stopped before lifting the stick blender out of the blending jug.

TO DETACH THE BLENDING SHAFT

Ensure the trigger switch is released and unplug the power plug from the power outlet.

Hold the motor body with one hand and using thumb and ﬁnger of the other hand, press on the two EJECT buttons on either side of the motor body. Pull the motor body away from the blending shaft to detach.

RECOMMENDATIONS WHEN USING AS A STICK BLENDER

• The stick blender mixes foods and

liquids rapidly, therefore it is easy to over-process. Remember to periodically release the trigger switch and check food throughout operation.

• Allow food to cool slightly (so not

boiling) before blending.

• The blending shaft allows for hot food

to be processed directly in the saucepan. This makes blending soups and sauces very easy. For safety reasons, remove the saucepan from the heat source before processing.

• Ensure the motor body of the appliance

and power cord are kept away from any heat source.

• When pureeing and blending, cut food

into uniform sizes. This will ensure smooth and consistent results.

• Warm all liquids to be added to

soups and purees, this will ensure even blending.

• Place the blending jug on the anti-slip

mat during blending. This will keep the blending jug stable.

• Do not operate the stick blender

continuously for more than 1 minute. Allow the motor to rest for 1 minute between each use.

• DO NOT place stick blender in

chopping bowl to process ingredients.

If food becomes lodged around the blending blade or in the blade guard, follow these safety instructions:

1. Release the trigger switch and unplug

the power plug from the power outlet.

2. Use a spatula to carefully dislodge the

food. Do not use ﬁngers as the blending blade is sharp.

3. After the food has been removed and blades

are clear, plug the appliance back into the power outlet and continue blending.

BSB510XL_IB_A11_FA.indd 10 12/04/11 11:01 AM

ASSEMBLY & OPERATION

MINI CHOPPER

TO ATTACH THE CHOPPING BLADE, CHOPPING BOWL AND CHOPPING BOWL LID.

Remove the blending shaft from the motor body (follow the instructions on page 10 “To detach the blending shaft”).

Place the chopping blade onto the metal pivot pin in the base of the chopping bowl. Place the food inside the chopping bowl. Do not exceed the maximum 'MAX' marking.

NOTE

Always place the chopping blade onto the pivot pin on the bottom of the chopping bowl BEFORE placing any food in the bowl. Do not lift the blade before the complete chopping operation is ﬁnished.

Place the lid onto the chopping bowl.

TO USE THE CHOPPING BOWL

For food preparation tips and recipes refer to page 19 and the recipes section of this booklet.

Ensure the chopping bowl is completely and properly assembled.

1. Place food to be processed into the

chopping bowl. Do not exceed the 'MAX' marking on the chopping bowl.

2. Insert the plug into a 110/120V

power outlet.

3. By turning the speed control dial at

the top of motor body, select a speed between 1 and 15.

Low Speed : 1

Align the motor body with the chopping bowl lid and push down until the motor body ‘clicks’ into place. Ensure the chopping bowl lid is dry with no water left inside before reattaching.

BSB510XL_IB_A11_FA.indd 11 12/04/11 11:01 AM

High Speed : 15

4. Press the trigger switch to turn the mini

chopper on. The button must be held for the required duration of operation.

ASSEMBLY & OPERATION

5. When processing has ﬁnished switch off

the motor by releasing the trigger switch and remove the power plug from the power outlet.

6. Ensure the blade has completely

stopped before removing the lid from the chopping bowl. Carefully remove the chopping blade and use a spatula to scrape off any attached food back into the chopping bowl. Use the spatula to remove food from the chopping bowl.

TO DETACH THE CHOPPING BOWL AND LID

Ensure the trigger switch is released and unplug the power plug from the power outlet.

Hold the motor body with one hand and using thumb and ﬁnger of the other hand, press on the two EJECT buttons on either side of the motor body. Pull the motor body away from the chopping bowl lid to detach.

RECOMMENDATIONS WHEN USING THE STICK BLENDER WITH THE CHOPPING BOWL

• Do not operate the chopping bowl

when empty.

• The anti-slip mat keeps the chopping

bowl stable, however it is recommended during processing to hold the motor body with one hand and the chopping bowl and lid with the other.

• When processing, cut food into uniform

sizes to ensure quicker, even and more consistent results.

• To avoid damage to the chopping/

mixing blade, DO NOT process, or grind hard items such as frozen foods, ICE, cereals, rice, spices, chocolate bars or coffee beans.

• DO NOT process boiling or hot foods in

the chopping bowl.

• NEVER remove the blade from the

chopping bowl before food processing is completed.

• The chopping bowl blends foods and

liquids rapidly, therefore it is easy to over process. Remember to periodically release the trigger switch and check food throughout operation.

BSB510XL_IB_A11_FA.indd 12 12/04/11 11:01 AM

ASSEMBLY & OPERATION

WHISK

TO ATTACH THE WHISK

Remove blending shaft from motor body (follow the instructions on page 10 “To detach the blending shaft”).

Align the top end of the whisk gearbox with the corresponding end of the motor body and push until the whisk ‘clicks’ and locks onto the motor body.

Ensure the whisk gearbox is dry with no water left inside before re-attaching.

3. By turning the speed control dial at

the top of motor body, select a speed between 1 and 15.

Low Speed : 1 High Speed : 15

4. Place the whisk into the blending jug

and press the trigger switch to turn the whisk on. The button must be held for the required duration of operation.

5. Move the whisk through the ingredients

in the blending jug with a gentle raising and lowering motion until desired texture is achieved.

6. When whisking has ﬁnished, switch off

the motor by releasing the trigger switch and remove the power plug from the power outlet.

7. Ensure the whisk has completely

stopped rotating before lifting the whisk out of the blending jug.

TO DETACH THE WHISK

Ensure the trigger switch is released and unplug the power plug from the power outlet.

Hold the motor body with one hand and using thumb and ﬁnger of the other hand, press on the two EJECT buttons on either side of the motor body. Pull the motor body away from the whisk to detach.

TO USE THE WHISK

For food preparation tips and recipes refer to page 19 and the recipes section.

Ensure the whisk is completely and properly assembled.

1. Place food to be whisked into the

blending jug or a sufﬁciently large mixing bowl or container.

2. Insert the plug into a 110/120V

power outlet.

BSB510XL_IB_A11_FA.indd 13 12/04/11 11:01 AM

ASSEMBLY & OPERATION

RECOMMENDATIONS WHEN USING THE STICK BLENDER WITH THE WHISK ATTACHMENT

• Do not allow the whisk to hit the bottom

or sides of mixing bowl while the appliance is in operation, as this may damage the whisk.

• To incorporate air into the ingredients

when whisking, use a sufﬁciently deep, wide container and move the whisk through the ingredients with a gentle raising and lowering action.

• Place the mixing bowl on a damp cloth

during whisking. This will keep the mixing bowl stable.

• Always use fresh chilled cream and

fresh eggs at room temperature to achieve greater and more stable volume when whisking.

• Always ensure the whisk and mixing

bowl are completely clean and free of fat before whisking egg whites.

• It is recommended to use the

highest speed when whisking egg whites and cream.

BSB510XL_IB_A11_FA.indd 14 12/04/11 11:01 AM

BSB510XL_IB_A11_FA.indd 15 12/04/11 11:01 AM

CARE, CLEANING

& STORAGE

of your Breville Control Grip™

TYPESET V1

BSB510XL_IB_A11_FA.indd 16 12/04/11 11:01 AM

CARE, CLEANING & STORAGE

Whisk Gear Box

MOTOR BODY

Remove the power plug from power outlet before cleaning. To remove any food residue, wipe the motor body and cord with a damp cloth only. Do not use abrasive cleaners or steel wool. Never immerse the motor body in water or any other liquid. Do not place motor body in dishwasher.

BLENDING SHAFT

Remove the power plug from power outlet before cleaning. Remove the motor body from the blending shaft. The blending shaft can be hand washed in hot soapy water, rinsed and dried thoroughly after each use. Alternatively, the blending shaft can also be washed in the dishwasher. Do not use abrasive cleaners or steel wool.

QUICK WASH: Between each processing task, with the motor body attached, place the blending shaft and blending blade only into a jug of water and press the trigger switch to turn on for 5 seconds. This will remove any food on the blending blade and allow you to continue onto the next processing task.

CHOPPING BOWL, CHOPPING BOWL LID, CHOPPING BLADE AND STORAGE LID/ANTI-SLIP MAT

Remove the power plug from power outlet before cleaning. Remove the motor body from the chopping bowl lid, and then remove the chopping bowl lid and chopping blade from the chopping bowl.

The chopping bowl, chopping bowl lid and chopping blade should be hand washed in hot soapy water, rinsed and dried thoroughly after each use. Alternatively, the chopping bowl and chopping blade can be washed in the dishwasher. Do not wash the chopping bowl lid in the dishwasher. Do not use abrasive cleaners or steel wool.

WHISK

Remove the power plug from power outlet before cleaning. Remove the motor body from whisk. The whisk can be hand washed in hot soapy water, rinsed and dried thoroughly after each use. Alternatively, the whisk can also be washed in the dishwasher. Do not use abrasive cleaners or steel wool.

Remove the whisk from the whisk gearbox before placing in the dishwasher.

NOTE

The whisk gearbox is not dishwasher safe.

BLENDING JUG AND STORAGE LID/ ANTI-SLIP MAT

The blending jug and storage lid/anti-slip mat can be hand washed in hot soapy water, rinsed and dried thoroughly after each use. Alternatively, the blending jug and storage lid/anti-slip mat can also be washed in the dishwasher. Do not use abrasive cleaners or steel wool.

STORAGE

Remove the power plug from power outlet before storing. Ensure the appliance is clean and completely dry.

Insert the chopping blade into the chopping bowl then attach the chopping bowl lid. Place the assembled chopping bowl inside the blending jug. Attach the storage lid/antislip mat to the bottom of the blending jug.

BSB510XL_IB_A11_FA.indd 17 12/04/11 11:01 AM

TYPESET V1

FOOD PREPARATION

GUIDE

for your Breville Control Grip™

BSB510XL_IB_A11_FA.indd 18 12/04/11 11:01 AM

FOOD PREPARATION GUIDE

Milkshakes, smoothies, cocktails, fruit frappes

Blending shaft Use chilled milk. Blend until

desired consistency is achieved. Use mid to maximum speed for 30 seconds.

Soups, dips, baby food Blending shaft Blend until smooth. Use mid to

maximum speed for 30 seconds.

Cheese (maximum weight ½ lb/200g, pre-cut

Chopping bowl

Use maximum speed for 20-30 seconds.

into ¾ inch/2cm cubes)

Carrot (maximum weight ½ lb/200g, pre-cut

Chopping bowl

Use maximum speed for 20-30 seconds.

into ¾ inch/2cm cubes)

Onion (maximum weight 1oz/30g)

Nuts (maximum weight 5oz/150g)

Red meat, chicken ﬁllets, ﬁsh ﬁllets (maximum weight ½lb/200g, pre-

Chopping bowl

Use mid speed for 20 seconds.

Use mid to maximum speed for 20-30 seconds.

cut into ¾ inch/2cm cubes)

Ice Blending shaft Use maximum speed for

20-30 seconds.

Cream (1½ cup/400ml maximum) Egg whites (4 eggs maximum)

Whisk Use mid to maximum speed for

20-30 seconds.

Light batters

Do not operate the stick blender continuously for more than 1 minute. Allow the motor to rest for 1 minute between each use. This is especially important when mixing dry, thick or heavy mixtures. Never mix for more than 15 seconds. Stop operation and stir the ingredients before continuing.

BSB510XL_IB_A11_FA.indd 19 12/04/11 11:01 AM

RECIPES

TYPESET V1

BSB510XL_IB_A11_FA.indd 20 12/04/11 11:01 AM

SOUP

PUMPKIN AND KUMERA (SWEET POTATO) SOUP

Serves 4-6

INGREDIENTS

2 tablespoons light olive oil 2 cloves garlic, crushed 2 large leeks, washed and thinly sliced 3 lbs (1.5kg) pumpkin, peeled and chopped

1.5lbs (750g) kumera (sweet potato), peeled and chopped

6 cups chicken stock 2 teaspoons ground cumin Pepper, to taste 1 cup light sour cream

METHOD

1. Heat oil in a large saucepan over

medium heat, sauté garlic and leeks until transparent and golden.

2. Add the next 4 ingredients, bring to the

boil, and then reduce heat to simmer.

3. Simmer until vegetables have softened.

4. Remove from heat, cool slightly.

5. Place Stick Blender into saucepan and

blend until soup is smooth. Fold in the remaining ingredients..

MEDITERRANEAN SOUP

Serves 4-6

INGREDIENTS

2 tablespoons olive oil 2 large Spanish onions, chopped 2 eggplants chopped 5 zucchinis, chopped 1lb (500g) tomatoes, chopped 3 cloves garlic, crushed 3 red bell pepper, seeded and chopped 2 green bell pepper, seeded and chopped 1 tablespoon pesto paste 6 cups chicken stock Pepper, to taste

METHOD

1. Heat oil in a large saucepan over

medium heat, sauté onions until slightly golden.

2. Add remaining ingredients and bring to

the boil, then reduce heat to simmer.

3. Simmer until vegetables are tender.

4. Remove from heat, cool slightly.

5. Place Stick Blender into saucepan and

blend until soup is smooth.

Serve with crusty Italian bread.

BSB510XL_IB_A11_FA.indd 21 12/04/11 11:01 AM

+ 47 hidden pages