Breville BSB510 User Manual
the Control Grip
Instruction Booklet
TYPESET V1
BSB510
TYPESET V1
CONGRATULATIONS
on the purchase of your new
Breville Control Grip
CONTENTS
4 Breville recommends safety first
6 Know your Breville
Control Grip
8 Operating your Breville
Control Grip
14 Care, cleaning & storage for your
Breville Control Grip
16 Food preparation guide for your
Breville Control Grip
18 Recipes
3
BREVILLE RECOMMENDS SAFETY FIRST
At Breville we are very safety conscious. We design and manufacture consumer products with
the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise
a degree of care when using any electrical appliance and adhere to the following precautions.
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS
BEFORE USE AND SAVE FOR
FUTURE REFERENCE
• Remove any packaging material and
promotional stickers before using the
stick mixer for the first time.
• Do not place the stick mixer near
the edge of a bench or table during
operation. Ensure the surface is level,
clean and free of water, flour, etc.
• Do not place the stick mixer on or near
a hot gas or electric burner, or where it
could touch a heated oven.
• If using the stick mixer to blend hot
food in a saucepan over heat, remove
the saucepan from the heat source and
ensure the power cord and body of
appliance are also kept away from any
heat source.
• Handle the stick mixer and
attachments with care – remember the
blade is very sharp and should be kept
out of reach of children.
• Always make sure the stick mixer is
completely and properly assembled
before operating.
• Ensure the Stick mixer is turned off
at the trigger switch, the power is
switched off at the power outlet and
the cord is unplugged from the power
outlet before attempting to attach any
of the accessories.
• Always ensure the Blending Leg is
securely fitted onto the blender motor
body before operating.
• Do not use attachments other than those
provided with the Stick mixer.
• Please only use the whisk attachment
for the recipes contained in this
instruction booklet.
• Do not use the whisk attachment for
anything other than its intended use.
• Do not attempt to operate the stick
mixer by any method other than those
described in this booklet.
• Do not process hot or boiling liquids in
the chopping bowl – allow liquids to cool
before placing into the chopper bowl.
• Do not operate the appliance
continuously for more than 1 minute.
Allow the motor to rest for 1 minute
between each use.
• Never mix dry, thick or heavy mixtures
for more than 30 seconds. Stop the
operation and stir the ingredients before
continuing. Allow the motor to rest for 1
minute between each use.
• When using heavy loads, the appliance
should not be operated for more than
30 seconds.
• Recipes in this instruction booklet are
not considered heavy loads.
• Always ensure the Stick mixer is turned
off, the power is switched off at the
power outlet and the cord is unplugged
from the power outlet before attempting
to move the appliance, when not in
use, if left unattended and before
disassembling, cleaning or storing.
• If food becomes lodged around the
processing blade or in the blade
guard, release the ON button, switch
the power off at the power outlet and
unplug the cord. Use a spatula to
4
BREVILLE RECOMMENDS SAFETY FIRST
dislodge the food. Do not use fingers as
the blades are sharp.
• To protect against electric shock do not
immerse the motor body, cord or power
plug in water or any other liquid.
• Do not remove the stick mixer from
ingredients during operation. Ensure the
appliance is switched off and has stopped
turning before removing, to avoid contact
with moving blade or whisk.
• Do not leave the stick mixer unattended
when in use.
• Keep the appliance clean. Follow
the cleaning instructions provided in
this book.
• Do not use the stick mixer/stick blender
with wet hands.
IMPORTANT SAFEGUARDS FOR
ALL ELECTRICAL APPLIANCES
• Unwind the cord fully before use.
• Do not let the cord hang over the edge of
a table or counter, touch hot surfaces or
become knotted.
• This appliance is not intended for use
by young children or infirm persons
without supervision.
• Young children should be supervised
to ensure that they do not play with
the appliance.
• It is recommended to regularly inspect
the appliance. Do not use the appliance
if power supply cord, plug or appliance
becomes damaged in any way. Return
the entire appliance to the nearest
authorised Breville service centre for
examination and/or repair.
• Any maintenance, other than cleaning,
should be performed at an authorised
Breville Service Centre.
• This appliance is for household use
only. Do not use this appliance for
anything other than its intended use.
Do not use in moving vehicles or boats.
Do not use outdoors.
• The installation of a residual current
device (safety switch) is recommended
to provide additional safety protection
when using electrical appliances. It
is advisable that a safety switch with
a rated residual operating current
not exceeding 30mA be installed in
the electrical circuit supplying the
appliance. See your electrician for
professional advice.
SAVE THESE
INSTRUCTIONS
5
5
KNOW
your Breville Control Grip
TYPESET V1
KNOW YOUR BREVILLE CONTROL GRIP
B
C
F
H
A
D
E
A. Motor Body
B. Speed Control Dial
C. Easy Grip Trigger Switch
D. Detachable blending leg
E. Stainless steel blending blade
F. Chopping bowl
J
G
K
I
G. Chopping blade
H. Chopper bowl lid
I. Blending Jug
J. Whisk
K. Dual-purpose storage lid and
anti-slip mat
7
TYPESET V1
ASSEMBLY & OPERATION
of your Breville Control Grip
ASSEMBLY & OPERATION
BEFORE FIRST USE
Remove any packaging material and
promotional labels. Remove the blending
leg from the mixer motor body and wash
it in warm soapy water (refer to assembly
instructions in this booklet). Rinse and dry
thoroughly. Ensure no water remains inside
the blending leg to avoid water running into
the motor body when reattached.
Disassemble and wash the chopping blade,
chopper bowl, chopper bowl lid, whisk,
storage lid, and blending jug in warm soapy
water, rinse and dry thoroughly. Ensure no
water remains on the chopper bowl lid or
whisk attachment to avoid water running
into the motor body when reattached.
NOTE
The detachable blending leg, chopping
bowl, chopping blade, blending jug,
whisk and dual purpose storage lid/
anti-slip mat can also be washed in
the dishwasher. The chopper bowl lid,
whisk gearbox and motor body are
not dishwasher safe – see the care and
cleaning section of this booklet for
cleaning instructions of these parts.
This stick mixer is a versatile appliance
that can be attached to:
• The stainless steel blending leg– for use
as a stick mixer
• The chopper bowl with chopping blade
and lid – for use as a mini chopper
• The whisk attachment – for use as a
hand whisk
TO ATTACH THE BLENDING LEG
Hold the blending leg with the blades down,
and align the top end of the blending leg
with the corresponding end of the motor
body and push until the blending leg ‘clicks’
and locks onto the motor body.
Always ensure blending leg is dry, and no
water left inside, before reattaching.
USING AS A STICK MIXER
Ensure the blending leg is assembled to the
motor body as detailed above.
1. Place food to be processed into the
blending jug provided (or a sufficiently
large mixing bowl or saucepan). The jug
provided should be only be ½ full or less
when blending liquids or when making a
puree of fruit and/or vegetables.
2. Insert the plug into a 230/240V power
outlet and turn the power on.
3. By turning the dial at the top of motor
body, select a speed between 1 and 15.
Low Speed : 1
High Speed : 15
NOTE
If selecting a high speed, it is
recommended that you start with a
slow speed and gradually increase to
the higher speed to avoid splattering
and over-processing.
4. Place the blending leg as deeply as
possible into the jug and press the
trigger switch to turn the stick mixer on.
The button must be held for the required
duration of operation.
9
ASSEMBLY & OPERATION
5. Work through the ingredients in
the jug with a gentle raising and
lowering motion.
6. Switch off the motor by releasing the
trigger switch
7. Ensure the motor has completely
stopped before lifting the blender out of
the jug.
8. When processing has finished, switch
off at the power outlet and remove the
power plug.
TO DETACH THE BLENDING LEG
Ensure the trigger switch is released, the
power is turned off at power point and the
appliance is unplugged.
Hold the motor body with one hand, and
using thumb and finger of the other hand,
press on the two EJECT buttons on either
side of the motor body. Pull the motor body
away from the blending leg to detach.
RECOMMENDATIONS WHEN USING
AS A STICK MIXER
• The stick mixer blends foods and liquids
rapidly, therefore it is easy to overprocess. Remember when using the
blending leg to stop the stick mixer and
check food throughout the operation.
• Allow food to cool before blending.
• The stainless steel blending leg allows
for hot food to be processed directly
in the saucepan. This makes blending
soups and sauces very easy.
• For safety reasons remove saucepan
away from the heat before processing.
• Ensure the body of the appliance and
power cord are kept away from any
heat source.
• When pureeing and blending, cut food
into uniform sizes. This will ensure
smooth and consistent results.
• Warm all liquids to be added to
soups and purees, this will ensure
even blending.
• Place the blending jug on the anti-slip
mat during blending. This will keep the
jug stable.
• Do not operate the appliance
continuously for more than 1 minute.
Allow the motor to rest for 1 minute
between each use.
If food becomes lodged around the
processing blade or in the blade guard,
follow the following safety instructions:
1. Release the Trigger switch the power off
at the power outlet and unplug the cord.
2. Use a spatula to carefully dislodge the
food. Do not use fingers as the blades
are sharp.
3. After the food has been removed and
blades are clear, plug the appliance back
into the power supply, switch the power
on and continue blending.
10
Loading...