Breville BSB500 User Manual

Wizz Stainless Plus
Model BSB500
Instructions for use Includes recipes
Congratulations
on the purchase of your new Breville Wizz Stainless Plus
Page
Breville recommends safety first 4
Know your Breville Wizz Stainless Plus 6
Operating your Wizz Stainless Plus 7
Care, cleaning and storage 14
Food preparation guide 16
Recipe ideas R2
2
5
If food becomes lodged around the processing
blade or in the blade guard, switch the power off at the power outlet and unplug the cord. Use a spatula to dislodge the food. Do not use fingers as the blade is sharp.
Do not remove the Wizz Stainless Plus from
ingredients during operation. Ensure the appliance is switched off and has stopped turning before removing, to avoid contact with moving blade or whisk.
To protect against electric shock do not immerse
the motor body, cord or power plug in water or any other liquid.
Keep the appliance clean. Follow the cleaning
instructions provided in this book.
Unwind the cord fully before use.
Do not let the cord hang over the edge of a table
or counter, touch hot surfaces or become knotted.
This appliance is not intended for use by young
children or infirm persons without supervision.
Young children should be supervised to ensure that
they do not play with the appliance.
It is recommended to regularly inspect the
appliance. Do not use the appliance if power supply cord, plug or appliance becomes damaged in any way. Return the entire appliance to the nearest authorised Breville service centre for examination and /or repair.
Any maintenance, other than cleaning, should be
performed at an authorised Breville Service Centre.
This appliance is for household use only. Do not use
this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors.
The installation of a residual current device (safety
switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.
Breville recommends safety first
We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions:
Read all instructions before operating and save for future reference
Remove any packaging material and promotional
stickers before using the Wizz Stainless Plus for the first time.
Do not place the Wizz Stainless Plus near the edge
of a bench or table during operation. Ensure the surface is level, clean and free of water, flour, etc.
Do not place the Wizz Stainless Plus on or near a
hot gas or electric burner, or where it could touch a heated oven.
Always make sure the Wizz Stainless Plus is
completely and properly assembled before operating.
Always ensure the blending shaft is securely fitted
onto the blender motor body before operating.
Do not attempt to operate the Wizz Stainless Plus
by any method other than those described in this booklet.
If using the Wizz Stainless Plus as a stick blender to
blend hot food in a saucepan over heat, remove the saucepan from the heat source and ensure the power cord and body of appliance are also kept away from any heat source.
Do not process hot or boiling liquids in the chopper
bowl – allow liquids to cool before placing into the chopper bowl.
Handle the Wizz Stainless Plus and attachments
with care – remember the blade is very sharp and should be kept out of reach of children.
Do not use attachments other than those provided
with the Wizz Stainless Plus.
Do not operate the appliance continuously for
more than 40 seconds. Allow the motor to rest for 1 minute between each use.
Never mix dry, thick or heavy mixtures for more
than 15 seconds. Stop the operation and stir the ingredients before continuing. Allow the motor to rest for 1 minute between each use.
Do not leave the Wizz Stainless Plus unattended
when in use.
Always ensure the Wizz Stainless Plus is turned off
at the power outlet and the cord is unplugged from the power outlet before attempting to move the appliance, when not in use, if left unattended and before disassembling, cleaning or storing.
Always ensure the Wizz Stainless Plus is turned off
at the power outlet and the cord is unplugged from the power outlet before attempting to attach any of the accessories.
4
Important safeguards for all electrical appliances
Operating your Breville Wizz Stainless Plus
7
Before first use
Remove any packaging material and promotional labels. Remove the blending shaft from the Wizz Stainless Plus motor body and wash the blending shaft in warm soapy water. Rinse and dry thoroughly. Ensure no water remains inside the blending shaft to avoid water running into the motor body when reattached.
Disassemble and wash chopping blade, chopper bowl and chopper bowl lids, whisk attachment, jug and storage lid in warm soapy water, rinse and dry thoroughly. Ensure no water remains on the chopper bowl lid or whisk attachment to avoid water running into the motor body when reattached.
The detachable blending shaft and whisk attachment (without the gear box) are dishwasher safe. Do not wash any other parts of the Wizz Stainless Plus in the dishwasher.
The Wizz Stainless Plus is a versatile appliance
The Wizz Stainless Plus motor body can be attached to:
The stainless steel blending shaft – for use as a
stick blender
The chopper bowl with chopping blade and lid
– for use as a Mini Chopper or Food Processor
The whisk attachment – for use as a stick whisk.
6
Know your Breville Wizz Stainless Plus
Heavy duty 600 watt motor
2 speed push button control
Stylish stainless steel design
Detachable stainless steel blending shaft
for easy cleaning
Stainless steel processing blade
with surrounding blade guard
Chopper bowl
with lid and chopping blade
(additional storage lid not shown)
Whisk attachment
for quick whisking and beating
Detachable gear box
used to attach the whisk and chopper
bowl attachment to the motor body
Transparent jug and storage lid
for blending and measuring
9
Recommendations when using the Wizz Stainless Plus as a stick blender
The Wizz Stainless Plus blends foods and liquids
rapidly, therefore it is easy to over-process. Remember when using the Wizz Stainless Plus, check food throughout the operation.
The stainless steel blending shaft on the Wizz
Stainless Plus allows for hot food to be processed directly in the saucepan. This makes blending soups and sauces very easy.
For safety reasons remove saucepan away from the
heat before processing.
Ensure the body of the appliance and power cord
are kept away from any heat source.
When pureeing and blending, cut food into
uniform sizes. This will ensure smooth and consistent results.
Warm all liquids to be added to soups and purees,
this will ensure even blending.
Place the jug on a damp cloth during blending.
This will keep the jug stable.
Do not operate the appliance continuously for
more than 40 seconds. Allow the motor to rest for 1 minute between each use.
If food becomes lodged around the processing blade or in the blade guard, follow the following safety instructions:
1. Switch the power off at the power outlet and
unplug the cord.
2. Use a spatula to carefully dislodge the food.
Do not use fingers as the blade is sharp.
3. After the food has been removed and blade is
clear, plug the appliance back into the power supply, switch the power on and continue blending.
Wizz Stainless Plus (Stick Blender) – assembly & operation
To detach the stainless steel blending shaft
Ensure the Wizz Stainless Plus is turned off at the power outlet and the appliance is unplugged. Unscrew the blending shaft from the motor body in an anti-clockwise direction.
To attach the stainless steel blending shaft
Hold the shaft with the blades down, and align the top end of the blending shaft with the corresponding end of the motor body. Screw the shaft into the motor body in a clockwise direction (See Fig 1).
To use the stick blender
Ensure the stick blender is completely and properly assembled as detailed on the left.
1. Place food to be processed into the jug provided (or a sufficiently large mixing bowl or saucepan). The jug provided should be only
1
⁄2full or less when blending liquids or when making a puree of fruit and/or vegetables
2. For food preparation tips and recipes refer to page 16 and the recipes section.
3. Insert the plug into a 230/240V power outlet and turn the power on.
4. Place the blending shaft as deeply as possible into the jug and depress either the ‘HIGH’ or ‘LOW’ speed control to turn the stick blender on. The button must be kept depressed for the required duration of operation.
5. Work through the ingredients in the jug with a gentle raising and lowering motion.
6. Ensure the motor has completely stopped before lifting the stick blender out of the jug.
When processing has finished, switch off at the power outlet and remove the power plug.
8
THE PROCESSING BLADE ON THE BLENDING SHAFT IS EXTREMELY SHARP, KEEP FINGERS AWAY FROM THE BLADE AT ALL TIMES.
11
Wizz Stainless Plus (Chopper) – assembly & operation
10
To attach the plastic gear box, chopping blade, chopper bowl and lid
Remove blending shaft from motor body as on page 8.
The chopping blade is extremely sharp and should be handled only by the upper plastic section.
Note
Place the blade onto the base of the chopper bowl (See Fig 1). Place the food inside the chopper bowl. Do not exceed the maximum (MAX) marking.
Place the transparent lid onto the chopper bowl and press down firmly to secure (See Fig 2).
Align the closed end of the gear box with the corresponding part of the chopper bowl lid (See Figure 3). In a clockwise direction, attach and lock the motor body to the open end of the gearbox (See Figure 4).
Ensure chopper bowl lid is dry with no water left inside before re-attaching.
Always place the chopping blade onto the base of the chopper bowl BEFORE placing food inside. Do not lift the blade before the complete chopping operation is finished.
Note
To use the chopper bowl
For food preparation tips and recipes refer to page 16 and the recipes section.
Ensure the chopper is completely and properly assembled as detailed on this page.
1. Insert the plug into a 230/240V power outlet and turn the power on.
2. Select a speed to turn the appliance on and start the chopping blade.
3. When processing has finished, switch off the motor by releasing the speed button, switch off at the power outlet and remove the power plug.
6. Detach the motor body and gear box (refer to instructions below). Remove the lid from the chopper bowl. Carefully remove the chopping blade and use a spatula to scrape off any attached food back into chopper bowl. Use a spatula to remove food from the chopper bowl.
To detach the chopper bowl
Ensure the speed is released, power is turned off at the power point and the appliance is unplugged.
In an anti-clockwise direction, unlock the motor body from the gear box (See Fig 4). Lift the gear box from the chopper bowl lid (See Fig 3).
Recommendations when using the Wizz Stainless Plus with the chopper bowl
Do not operate your Wizz Stainless Plus when the
chopper bowl is empty.
The rubber surround around the base of the
chopping blade keeps the chopper bowl stable, however it is recommended during processing to hold the motor body with one hand and the chopper bowl and lid with the other.
When processing, cut food into uniform sizes to
ensure quicker, even and more consistent results.
DO NOT process hard foods such as coffee, cereals
or chocolate in lumps, as damage to the blade may result.
DO NOT process boiling or hot foods in the
chopper bowl.
NEVER remove the blade from the bowl before
food processing is completed.
The Wizz Stainless Plus blends foods and liquids
rapidly, therefore it is easy to over process. Remember to check food throughout the operation.
4
2
1
3
Loading...
+ 12 hidden pages