QUAD-BLADE BLENDER
OWNER'S MANUAL
Model KB305H
120V~, 60Hz., 700 Watts
EURO-PRO Operating LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel.: 1-800-798-7398
IMPORTANT SAFETY INSTRUCTIONS
When using your Bravetti QUAD-BLADE BLENDER, basic safety precautions
should always be observed, including the following:
Model KB305H
1. Read all instructions before using your
Quad-Blade Blender.
2. To protect against electrical shock, do
not submerge the blender or allow the
power cord to come into contact with
water or any other liquid.
3. Close supervision is necessary when
any appliance is used by or near
children. Never leave an appliance
unattended when in use.
4. Turn the appliance Off and remove the
power cord from the electrical outlet
when not in use, before assembling or
disassembling parts and before
cleaning. To unplug, grasp the plug
and pull from the electrical outlet.
Never pull from the power cord
5. Always allow the appliance to cool
before taking off parts and before
cleaning.
6. Avoid contact with moving parts.
7. Do not operate the appliance with a
damaged power cord or plug. Do not
use appliance if it has been dropped,
damaged, left outdoors or dropped in
water. Return appliance to EURO-PRO
Operating LLC for examination, repair or
adjustment.
8. Do not use outdoors.
9. Do not let the power cord hang over
the edge of table or counter or touch
hot surfaces such as the stove.
10. Do not operate this appliance on or
near any hot surfaces (such as gas or
electric burner or in a heated oven).
11. The use of attachments or accessories
not recommended by the
manufacturer may result in fire,
electric shock or personal injury.
12. Do not overfill.
13. Do not abuse the power cord. Never
carry the appliance by the power cord
or yank it to disconnect from electrical
outlet; instead grasp the plug and pull
to disconnect.keep hands, hair,
clothing, as well as utensils out of
container while blending to reduce the
risk of severe injury to persons or
damage to the appliance. A scraper
may be used but only when the
blender is not running.
14. Blades are sharp; handle carefully.
15. To reduce risk of injury, never place
the blade assembly on base with
blender jar properly attached.
16. Always operate the blender with the
blender cover in place.
17. When processing hot liquids, remove
the measuring cap from the two piece
blender cover.
18. THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY.
This unit has a short power supply cord to
Reduce the risk resulting from becoming
entangled in or tripping over a long cord. An
extension cord may be used if you are
careful in its use:
1. The electrical rating of the extension
cord should be at least as great as the
electrical rating of the appliance.
2. An extension cord with the power cord
must be arranged so that it will not drape
over the countertop or tabletop where
they can be pulled on by children or
tripped over accidentally
.
SAVE THESE INSTRUCTIONS
For Household Use Only
WARNING: To reduce the risk of electric shock, this appliance has a po larized plug
(one blade is wider than the other). This plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not modify the plug in any way.
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from defects in material and
workmanship for a period of one (1) year from the date of purchase when utilized for normal
household use.
If your appliance fails to operate properly while in use under normal household conditions within the
warranty period, return the complete appliance and accessories, freight prepaid to EURO-PRO
Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY 12901. If the appliance is found by
EURO-PRO Operating LLC to be defective in material or workmanship, EURO-PRO Operating LLC
will repair or replace it free of charge. Proof of purchase date and $12.95 to cover the cost of return
shipping and handling must be included.*
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of
the unit at our option. This warranty does not cover normal wear of parts and does not apply to any
unit that has been tampered with or used for commercial purposes. This limited warranty does not
cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or
mishandling in transit.
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or
conventional warranties. The responsibilit y of EURO-PRO Operating LLC if any, is limited to the
specific obligations expressly assumed by it under the terms of the limited warranty. In no event is
EURO-PRO Operating LLC liable for incidental or consequential damages of any nature
whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential
damages, so the above may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of
purchase date and to attac h tag to item before packing w ith your name, complete address
and phone number with a note giving purchase information, model number and what you
believe is the problem with item. We recommend you insure the package (as damage in
shipping is not covered by your warranty). Mark the outside of your package “ATTENTION
CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the
specifications contain ed her ein are subject to change w ithout noti c e.
OWNERSHIP REGISTRATION CARD
Please fill out and mail the product registration card within ten (10) days of purchase in order to
validate the foregoing Limited Warranty. The registration will enable us to contact you in the unlikely
event of a product safety notification. By returning this card you acknowledge to have read and
understood the instructions for use, and warnings set forth in the accompanying instructions.
RETURN TO:
EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY 12901
Model KB305H
_______________________________________________________________________
Appliance model
_______________________________________________________________________
Date purchased Name of store
_______________________________________________________________________
Owner’s name
_______________________________________________________________________
Address City State Zip code
1
Rev. 04/03A
Printed in Turkey
OPERATING INSTRUCTIONS
Helpful Hints
• Always operate the blender with the
blender cover on.
• Always hold the bender jar with one
hand while processing.
• To ensure proper blending and to
prevent overflow, add ingredients to the
blending jar a little at a time.
• Never fill blender jar more that 3/4 full the blade action will cause the
ingredients to rise in the blender jar.
Blend large quantities in several
batches.
• Unless your recipe says otherwise, pour
liquid ingredients first into the blender jar
before solid ingredients. The liquid will
help the processing go much faster and
allow the blender to operate at a more
efficient rate.
• Do not use blender continuously for an
extended amount of time, (no more than
four (4) minutes running time without
cooling down).
• Do not remove the blender jar from the
power base while the motor is running.
• To prevent the possibility of severe
injury or damage to the appliance,, keep
hands and utensils out of the blender jar
while processing. A scraper may be use
only when the blender is not working.
• Do not store food or beverages in the
blender jar.
• Even though the blender is a versatile
appliance, it will not mash potatoes,
beat egg whites, extract juice from fruits
or vegetables, grind raw meat or knead
dough.
• When grating hard cheese, cut into
small cubes and put small amounts into
the jar. Cover the jar and process on
high speed. Do not overload. Use the
pulse button and process until it reaches
the consistency that you desire.
• When processing solids, always cut
food into 1"-2" sized pieces before
blending.
• Use extreme caution when
processing hot foods to avoid
accidental scalding or burns. When
processing hot foods, always remove
the measuring cap from the blender
cover before beginning.
Maintenance
This blender requires no maintenance. It
contains no user-serviceable parts inside
the motor housing. Do not remove the
motor housing cover. Contact EURO-PRO
if this product needs servicing.
Cleaning
NEVER IMMERSE POWER BASE IN
WATER OR ANY OTHER LIQUID.
1. Turn blender "Off".
2. Unplug blender from electrical outlet.
3. Remove the blender jar from the power
base.
4. Disassemble the ble nder jar and wash
in warm soapy water. Use extreme
caution when handling the blade
assembly.
5. Wipe the power base with a damp
cloth. Dry completely with a soft cloth.
Storage
Caution: Always assemble blender
parts correctly before storing the power
base.
1. Unplug and clean unit.
2. Wrap power cord counterclockwise
underneath the power base. (Fig. 5)
Note: Do not store the blender with the jar
cover in place.
Fig. 5
GETTING TO KNOW YOUR QUAD-BLADE BLENDER
1. Measuring Cap
2. Blender Jar Cover
3. Glass Blender Jar
4. Rubber Gasket
5. Blade Assembly
6. Retainer Ring
7. Power Base
8. Pulse Button
9. On/Off - Progressive
Variable Speed Control Dial
Technical Specifications
Voltage: 120V., 60Hz.
Power: 700 Watts
Jar Capacity: 48 oz.
5
2
OPERATING INSTRUCTIONS
The Bravetti Blender is an indispensable kitchen tool for blendi ng, chopping or
pureeing when preparing your favorite recipes. For best results, be sure to carefull y read
all the instructions contained in this book before using this appliance.
700 Watt Power Unit
The 700 Watt Power Unit operates on
120V~, 60Hz. electrical power. Never
allow the power unit to become wet when
plugged into an electrical outlet.
Warning: The power unit should never
be immersed in water.
Caution: Make sure that the power
unit is unplugged from power source
and the blades have stopped turning
before attaching or removing any
accessory.
Important: Do NOT operate the appliance
when empty as it could damage the power
base.
Assembling the Blender
Caution - Blades are sharp. Use extreme
caution when handling the blade
assembly, always hold it by the base of
the blade assembly. (Fig. 1) NEVER
HANDLE BY BLADES, VERY SHARP. Do
not immerse the power base in water or
any other liquid.
Glass Blender Jar Assembly
1. Place jar upside down on a flat level
surface. (Fig. 2)
2. Place the rubber gasket on the rim of
the blender jar. (Fig. 2)
3. Holding the blade assembly by the
base, place it carefully over the rubber
gasket. (Fig. 2)
4. Place the retainer ring over the base of
the blade assembly and screw on
tightly. (Fig. 2)
5. Before placing the assembl ed blender
jar on the power base, make sure that
the unit is not plugged in and that the
speed control dial is in the "OFF"
position. (Fig. 3)
Blender Jar
Fig. 2
Fig. 1
Retainer Ring
Blade Assembly
Rubber Gasket
Fig. 3
OPERATING INSTRUCTIONS
How to Use Your Blender
Caution - Blades are sharp. Use
extreme caution when handling the
blade assembly, always hold it by the
base of the blade assembly. (Fig. 1) Do
not immerse the power base in water or
any other liquid.
Caution: Make sure that the power
unit is unplugged from power source
and the blades have stopped turning
before attaching or removing any
accessory.
Important: Do NOT operate the appliance
when empty.
1. Place the power base on a dr y, level
surface.
2. Make sure that the On/Off-Variable
Speed Control Dial is in the "OFF"
position.
3. Place the blender
jar into position on
the power base.
(Fig. 4)
4. Plug the power
cord into the
electrical outlet.
5. Add ingredients
to the blender jar
as directed by your recipe.
6. Place the blender jar
cover on the blender
jar with the measuring
cap in place. Make
sure that the measuring cap is securely
in place by turning it clockwise to lock.
Always hold the measuring cap firmly
in place during processing so that it
does not come loose.
7. If you need to add additional
ingredients while the blender is
processing, just remove the measuring
cap and pour the ingredients in through
the opening in the blender jar cover.
8. Turn the variable speed control dial
clockwise until the desired speed is
reached. Speed may be varied during
processing.
9. After use, always turn the unit to the
"Off" position and unplug the power
cord from the electrical outlet before
removing the blender jar from the
power base.
CAUTION: NEVER REMOVE THE
BLENDER JAR FROM THE POWER
BASE WHILE THE BLENDER IS STILL
RUNNING.
Fig. 4
Caution: When working with hot foods
or liquids, always remove the
measuring cap from the blender jar
cover to vent the steam. Keep hands
and other exposed skin away from the
opening to prevent possible burns or
scalding. Do not use more than two (2)
cups of hot liquid at a time.
Progressive Variable Speed Control
The Bravetti Quad-Blade Blender is
equipped with a progressive variable
speed control. It gives the user the
ability to increase or decrease the
processing speed easily during use.
decrease
increase
Note: Always turn appliance to the
"Off" position after use and
unplug the power base.
To remove the blender jar,
lift it straight up; there is no
need to twist it.
Due to differences in
amounts and desired
consistencies of some
processed foods, a higher or
lower speed may be
required.
Pulse Function
Use the Pulse function when you need
an extra burst of speed but only when
you are below the "MAX" (maximum)
speed level.
You can use the Pulse function to
crush ice, but ice may also be crushed
at lower speeds as well. Crush only
about 8-10 oz. of ice at a time.
To clean the blender, fill the blender
with warm water and a drop of
dishwashing liquid and pulse a few
times and then remove the blender jar
from the power base and rinse the
blender jar.
3
4
Loading...