Bravetti EP90XX User Manual

Accessories for Food Processor with Blender

Model EP90XX

1. Blender Jar

12

3

4

2. Blender Jar Cover

3. Chopping Blade

4. Chopping Blade
Protective Cover

Using the Blender

CAUTION: Make sure that the unit is
unplugged from the power source and
the operating button is “OFF” before
inserting or removing attachments and
before cleaning.

1. Remove the processor bowl and lid.

2. Remove the safety cover. This can
only be done once the processor lid
has been removed.

3. Place the blender into its location on
the processor body with the handle to
the left. Turn counter clockwise until
the blender clicks into place and the
arrows are aligned.

Warning: Use extreme caution - blades
are sharp. Handle carefully.

4. Place food in blender.

5. Place the blender lid and the
measuring cap on the blender.

6. Replace the processor bowl and
processor lid. Ensure that the lid tab
has clicked into place. The blender
will not operate if the processor lid is
not clicked in place.

7. Plug in the processor.

8. Always operate the blender with the
lid in place.

TO REMOVE THE
BLENDER, YOU MUST
FIRST UNLOCK AND
REMOVE THE
PROCESSOR LID (A).
THEN UNLOCK ANS
RMOVE THE BLENDER (B)
BY TWISTING
CLOCKWISE.

WARNING:
ALWAYS REMOVE THE
BLENDER AND FIT THE
SAFETY COVER (2) INTO
THE RPOCESSOR BODY
(1) WHEN USING THE
PROCESSOR.

IMPORTANT: Remove protective blade

cover(s) before use. Protective blade
covers to only be used for storage.

CAUTION: Never operate the blender with more than 42 oz. (1250 ml) of liquid or when empty.

• Recommended speed levels for blending are between 5 - Max.

• Do not overload past the MAX level on the blender.

• You can crush 10 oz. of ice cubes in 15-20 seconds in the blender.

• To prevent spilling, do not operate the blender with more than 42 oz. (1250 ml) of liquid.

• Avoid contact with moving parts at all times.

• Do not blend boiling liquid.

• To reduce the risk of severe injury to people or damage to the blender, keep hands, hair,
clothing as well as spatulas and other utensils out of container while blending.

Rev. 08/01C

Accessories for Food Processor with Blender

Model EP90XX

FITTING & USING THE CHOPPING BLADE

In general, all attachments which are fitted within the processor bowl must be firmly attached to
the spindle. Always adjust the attachments until you are sure that they are correctly fitted.

Chopping Blade

1. Fit the processor bowl and spindle as detailed previously.

2. Remove the chopping blade protective cover (4) from the metal chopping blade.

3. Fit the blade over the spindle and press firmly into place.

WARNING:
USE EXTREME CAUTION - BLADES ARE SHARP. ALWAYS HANDLE THE CHOPPING
BLADE BY ITS CENTRAL PLASTIC HUB.

4. Place the food into the bowl.

5. Fit the lid and click into place as detailed in the “Setting Up” Section of the Instruction Book
for the Food Processor/Blender (page 4).

6. Insert power cord into electrical wall outlet.

• Keep hands and utensils away from cutting blades while chopping food to reduce the risk of

injury to persons or damage to the food chopper. A scraper may be used, but must be used
only when food processor is not running.

• Do not leave the appliance unsupervised when it is operating, i.e. when it is “ON”.

7. Never feed by hand. Always use the food pusher to push food into t he f o od proc essor
bowl through the feeder tube.

8. WARNING

blade from the bowl before removing the processed food.

9. AFTER CLEANING, ALWAYS REPLACE THE PROTECTIVE COVER (4) ON THE
METAL CHOPPING BLADE (3).

: When the processing is completed, unplug, then remove the spindle and

WARNING:

USE EXTREME CAUTION - BLADES ARE SHARP. ALWAYS HANDLE THE CHOPPING
BLADE BY ITS CENTRAL PLASTIC HUB. ALWAYS REMOVE CHOPPING BLADE
PROTECIVE COVER BEFORE USING.