BRAUN TA1080 User Manual

USER INSTRUCTIONS

DIRECTIVES D’UTILISATION

INSTRUCCIONES DEL UTILIZADOR

Important Safeguards Short Cord Instructions

Please read these instructions carefully & completely before using the appliance.

When using electrical appliances, basic safety precautions should always be followed including the following:

1. Read all instructions.

2. Do not touch hot surfaces. Use handles or knobs.

3. To protect against fire and electric shock, do not place cord, plugs or

appliance in water or other liquid.

4. Close supervision is necessary when any appliance is used by or near children.

5. Unplug from outlet when not in use and before cleaning. Allow to cool

down before emptying the drip tray or cleaning the appliance.

6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to an authorized service facility for examination, repair or adjustment.

7. The use of an accessory not recommended for use with this appliance may cause injuries.

8. Do not use outdoors.

9. Do not let cord hang over edge of table or counter, or touch hot surfaces.

10. Do not place on or near a hot gas or electric burner, or in a microwave

or heated oven.

11. Do not use appliance for other than intended use.

12. Scalding may occur if the brew mechanism is not properly closed during

the brewing cycle.

13. To disconnect the appliance, press the on/off switch to “OFF” and remove the plug from the electrical outlet. Remove plug by gripping plug body and pulling it from the outlet. Never yank or twist cord to unplug.

14. This appliance does not work at temperatures below 50°F/10°C.

15. Do not open the brew mechanism until the appliance has finished

brewing. Hot steam or hot water trapped under the clamp could burn your fingers.

Please note the Warning on the bottom of the appliance: “

To reduce the risk of fire or electrical shock, do not remove this cover. No user serviceable parts inside. Repair should be done by authorized service personnel only.”

Note: This machine is not suitable for use above altitudes of 6,500 ft/2000 m.

SAVE THESE INSTRUCTIONS

A short power cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. Longer detachable power supply cords or extension cords are available and may be used if care is exercised in their use.

If an extension cord is used, follow these guidelines: A. The marked electrical rating should be at least as great as the electrical

rating of the appliance.

B. If the appliance has a three-pronged power cord, the extension cord should

be a grounding-type 3-wire cord.

C. The longer cord should be arranged so that it will not drape over the

countertop or tabletop where it can be pulled on by children or tripped over.

INTENDED FOR HOUSEHOLD USE ONLY

The Art of the Perfect Cup 1

Your package contains the following:

• Tassimo Machine

• Quick Start Card

• Cleaning Disc

• User Instructions

Tassimo – The Art of the Perfect Cup™

Please read these instructions carefully and completely before using the appliance.

*Hot chocolate flavored drink

Thank you for purchasing the Tassimo hot beverage machine. With Tassimo, you can enjoy your favorite hot beverage any time. Rich filter coffee, intense espresso, delicate café crema, indulgent cappuccino, even chocolate* and tea are yours at the touch of a button.

The Tassimo machine is designed to work exclusively with special pods called Tassimo Discs (T-DISCS). T-DISCS contain precisely measured amounts of coffee, tea, chocolate* and concentrated milk. The internal components of the T-DISC®are uniquely tailored to each beverage and guide the flow through the Tassimo machine.

When you insert a T-DISC, the Tassimo machine reads the bar code printed on the label. This tells the machine exactly the size of drink, the brewing time and the precise temperature required to make your beverage. T-DISCS make a perfect team with the Tassimo machine and ensure exceptional beverage quality every single time, no matter what you choose to drink. T-DISCS are available online at www.tassimo.com (in the US) and in select retail stores. Look for them where you typically buy coffee.

Manu

C1 C2 C3

The Tassimo™ machine Tassimo – Tips for the perfect cup

2 The Tassimo machine Tips for the perfect cup 3

Fresh Water

For best results, always use fresh, cold water. Fresh water allows the flavors to better unfold.

T-DISCS can be stored in their carton dispenser, or if you prefer, you can transfer them to another container. While you should always store your T-DISCS in a cool, dry place, it is not necessary to keep them in the refrigerator. Do not keep T-DISCS in the freezer. If unopened, your T-DISCS are good until the “best before date” on the outer package.

Maintenance

You must regularly clean and descale your Tassimo machine to ensure best results (see sections “Cleaning” and “Descaling”). For cleaning and descaling purposes, a reusable cleaning disc is provided with the machine. Please keep it in a safe place for use as required. The drip tray is designed to collect the small amount of water that is released during brewing. Be sure to empty the drip tray periodically to prevent overflow. Please note that when brewing into a large mug without the drip tray and cup stand, a small amount of water will still trickle onto the bottom of the backsplash.

Cups and Mugs

The Tassimo machine will accommodate most of your favorite cups and mugs. Use the higher level of the adjustable cup stand for espresso cups and the lower level for most other cups. For larger mugs, you can also temporarily remove both the drip tray and the

cup stand; however, these should be replaced right after brewing. Always keep the backsplash in place while brewing.

To avoid spilling over, please ensure that your cup is the right size for the drink you are making. These are recommended cup sizes:

Espresso 3 oz / 90 ml cup Filter Coffee, 11 oz / 325 ml cup Café Crema, Cappuccino, Latte, Tea and Chocolate

A Water container

B Clamp

C Brew mechanism

C1 - T-DISC holder C2 - Piercing unit C3 - Bar code reading

window

D Adjustable cup stand

E Drip tray

F Backsplash

G Water expansion outlet

H Start/Stop button

I Indicator lights:

• AUTO

• MANUAL

• HEATING

• STANDBY

J On/Off switch

(on the back)

K Cleaning disc

Auto M

Sta

ndby

ASSIMO

click

uto

Preparing your machine for use

4 Preparing your machine for use Preparing your machine for use 5

PLEASE NOTE:

• For some drinks, the brew cycle includes a 5 to 10 second pause after the initial influx of water. This pause is normal and allows the water to fully saturate the product before brewing continues.

• Never open the brew mechanism during brewing. In “Auto Mode,” always wait for the indicator light to move from AUTO to MANUAL before opening the brew mechanism. In “Manual Mode,” take your finger off the start/stop button and wait until the machine has stopped before opening the brew mechanism.

• Always use care when removing your finished beverage. The beverage may be hotter than you expect.

• After 10 minutes of non-use, the STANDBY light will illuminate. If you are not going to use your machine for an extended period, turn it off using the on/off switch.

• This appliance is intended for household use only.

• Place the appliance on a dry, flat and fixed surface and keep it out of reach of children.

• Never use warm water, sparkling water or milk to fill the water container.

• This machine is not suitable for use at altitudes above 6500 feet/2000 meters.

• Braun electric appliances meet applicable safety standards. Repairs on electric appliances (including cord replacement) must only be carried out by authorized Braun service centers. Faulty, unqualified repair work may cause accidents or injury to the user.

IMPORTANT

Before using your Tassimo machine for the first time, it must be prepared by following the procedure below. Note: it is normal for all the lights to flash

when

you turn on the machine. Complete these simple steps to begin enjoying your favorite drinks.

Rinse the water container, fill it to “max” with fresh, cold water and place it on the machine. Check that the water container is properly inserted in the slot on the back of the machine. Connect the machine to the electrical supply and press the on/off switch located on the back of the machine. All the indicator lights will flash.

Place a large cup (at least 11 oz/325 ml) on the adjustable cup stand. Open the brew mechanism, position the cleaning disc (included in your package) on the T-DISC holder, bar code facing down. Firmly close the brew mechanism by pressing the clamp down until it shuts.

Wait five seconds then press and release the start/ stop button to start the machine. You will hear the

machine run for a short period to fill the internal water heater. When the machine stops running, the STANDBY light will illuminate.

Open the brew mechanism and close it again, leaving the cleaning disc in place. The orange HEATING light will begin to flash. Wait about a minute until the green AUTO light illuminates, then press and release the start/stop button. The machine will fill the cup with water. When the machine stops running, empty the cup and place it back on the adjustable cup stand. Repeat this step once more in its entirety.

Open the brew mechanism and remove the cleaning disc. The HEATING light will illuminate. Your machine is

now ready to use. Do not discard the cleaning disc after use – you will need it for flushing and descaling the appliance.

uto

ual

tin

How to use the machine – Auto Mode

6 How to use the machine – Auto Mode How to use the machine – Auto Mode 7

Rinse and fill the water container with fresh, cold water. Turn on the machine by pressing the on/off switch. Ensure that the water container is properly inserted in the slot on the back of the machine. Open the brew mechanism. Opening the brew mechanism will initiate the heating of the water and the HEATING light will flash.

Place a clean cup on the cup stand, adjusting the height of the stand up or down so that the rim of the cup is close to the brew mechanism.

• To adjust the cup stand, insert your finger in the center of the stand, lift and turn.

• To avoid spilling over, please choose the right sized cup for the drink you are making. See page 3 “Tips for the Perfect Cup.”

Position your choice of T-DISC on the T-DISC holder, label facing down. Firmly close the brew mechanism by pressing the clamp down until it shuts. The HEATING light may flash again as the machine heats the water to the required temperature for your drink.

When the AUTO light illuminates, press and release the start/stop button. Brewing will start automatically. There may be a short pause

during brewing; this is normal and is designed to draw out the full flavor of your drink. The AUTO light flashes throughout the brew cycle. When the machine has finished brewing, the indicator light will move from AUTO to MANUAL and then, after a delay of 30 seconds, to HEATING.

• When the indicator light moves to MANUAL, you can customize your cup as described in “Manual Mode” (see page 8).

• Once the liquid has begun to flow into your cup, you can stop the brew cycle by pressing and releasing the start/stop button. The machine will stop and any remaining liquid inside the T-DISC will empty into the cup.

Open the brew mechanism, remove the T-DISC and discard. Your drink is now ready to be enjoyed.

You can prepare the next beverage right away by repeating steps 2 – 5.

• Always remove the used T-DISC from the machine right after brewing. When removing the T-DISC, handle it by the thumb tab to avoid contact with heated areas.

• Please ensure that there is enough water in the water

container. If the water level is too low, all the indicator lights will flash, signalling that the water container needs

to be refilled.

• If the water level runs low while you are preparing a beverage, simply remove and refill the water container. Once the

water container is replaced, brewing will continue automatically where it left off.

Heating

Auto

Manual

Heating

Standby

Auto

Manual

Heating

Standby

Auto

anual

Heating

Standby

Auto

Manual

Heating

Standby

Auto

Manual

Heating

Standby

8 How to use the machine – Manual Mode How to use the machine – Manual Mode 9

How to use the machine – Manual Mode

While Tassimo is designed to make the optimal drink every time, your tastes may be different. With Tassimo, you can customize your cup by adjusting the amount of water and brewing time to suit your personal preferences.

For a milder flavor and a larger beverage

Follow steps 1-4 as described in “Auto Mode” (see page 6). When the indicator light moves from AUTO to MANUAL, simply press and hold the start /stop button to add more water. Take your finger off the start/stop button when your drink has reached the desired intensity and size. Once you release the start/stop button, the brew cycle will stop, any remaining liquid inside the T-DISC will empty into the cup, and the indicator light will move back to HEATING.

For a stronger taste and a smaller beverage

Follow steps 1-4 as described in “Auto Mode.” When your beverage has reached the desired strength and size, simply press the start/stop button to halt the cycle. The brew cycle will stop, any remaining liquid inside the T-DISC will empty into the cup, and the indicator light will move back to MANUAL and, after 30 seconds, to HEATING.

INDICATOR LIGHT WHEN THE LIGHT IS FLASHING WHEN THE LIGHT IS SOLID

AUTO Machine is operating in “Auto Mode.” Machine has recognized T-DISC

and is ready to be operated in “Auto Mode.”

MANUAL Machine is operating in “Manual Mode.” Beverage has finished brewing

and can now be customized. T-DISC is present but not recognized.

HEATING Water is heating to Water is hot and the machine is

required temperature. ready to make a drink.

STANDBY Machine has not been used for 10

minutes and is conserving energy. To operate the machine, simply insert a T-DISC and use normally.

ALL The machine is not prepared for use.

Error: check water level, check T-DISC.

Cleaning

10 Cleaning

Regularly clean your Tassimo machine to ensure best results. Always unplug the appliance before cleaning. Never immerse the appliance in water. Never use abrasive cleaning products or scouring materials on any part of the Tassimo machine. All the removable pieces are dishwasher safe except the water container which must be hand washed.

Machine Exterior

• The outside of the machine should be wiped down as necessary with a damp, soft cloth and gentle liquid soap. Always hand wash the water container.

• It is normal for the removable drip tray to collect water during the brewing process: regularly check the water level in the drip tray and empty it when it fills. The drip tray, cup stand, and backsplash should be removed and cleaned.

• To ensure proper flow of water into the drip tray, periodically clean the water expansion outlet using a clean cloth moistened with white vinegar. Securely position the backsplash on the machine before reinserting the drip tray and cup stand.

Machine Interior and Brew Mechanism

• The inside of the brew mechanism should be wiped with a damp soft cloth and gentle liquid soap. Wipe the bar code reading window on a regular basis to ensure that the Tassimo machine can clearly read the T-DISC.

• The piercing unit and T-DISC holder are easily removable and are dishwasher safe. Separate the piercing unit into two parts to clean it. The piercing unit can be quickly rinsed between beverages if desired.

• You can use the cleaning disc to flush the inside of the machine between drinks. Simply place the cleaning disc on the T-DISC holder and follow step 4 of “Preparing Your Machine for Use.”

• It is recommended that you rinse the piercing unit after using a milk or chocolate T-DISC.

Descaling

Descaling 11

Descale your Tassimo machine every three months to keep it operating at full potential.

Descaling products are widely available from stores selling coffeemakers and espresso machines. Only use a product intended for descaling. Mix the descaling product directly in the water container, following the instructions provided on the descaling packaging. Replace the water container on the machine.

Place a large cup or mug on the cup stand, insert the cleaning disc, bar code down, and close the brew mechanism. When the AUTO light illuminates, press and release the start /stop button. The brew cycle will fill the machine with descaling solution. Empty the cup and let the machine stand for 15 minutes.

Open the brew mechanism and close it again, leaving the cleaning disc in place. When the AUTO light illuminates, press and release the start/stop button. When the machine stops running, empty the cup, and let the machine stand for 15 minutes. Repeat this step two more times for maximum descaling effectiveness. Discard the remaining descaling agent from the water container, rinse it thoroughly and refill with fresh, cold water.

Open and close the brew mechanism again, leaving the cleaning disc in place. When the AUTO light illuminates, press and hold the start/stop button to flush water through the machine. The MANUAL light will flash. When the cup is full, release the start/stop button, empty the cup, and replace it on the cup stand.

Repeat step 4, flushing clean water through the machine in the same manner and emptying the cup as it fills. To ensure that all the descaling solution is completely rinsed away, flush two full water containers through the machine before using it again.

PROBLEM

Liquid is splashing out of the cup.

The machine is leaking from the brew mechanism.

The machine is leaking from the bottom.

My drinks are brewing smaller than usual.

I have lost my cleaning disc.

My machine is not operating; there are no lights illuminated.

PROBLEM

All the indicator lights are flashing.

The machine will not move past STANDBY.

The “Auto Mode” is not working.

My cup is overflowing.

My cup doesn’t fit.

Troubleshooting

12 Troubleshooting Troubleshooting 13

In the table below are solutions to problems that may occur. If you do not find an appropriate solution, please refer to the “Tassimo Customer Service” section.

SITUATION

1. Machine not prepared for use.

2. Water level is too low.

3. No T-DISC in machine.

4. T-DISC not read or damaged.

5. Piercing unit blocked.

6. The machine may require descaling.

7. Internal machine fault.

The brew mechanism may not be closed properly.

Bar code reader may not be able to read the T-DISC label.

Each drink has been formulated to produce the perfect amount of liquid. Be sure that you are using the right sized cup for your drink.

The cup stand is too close to the brew mechanism.

SOLUTION

1. Follow the procedure “Preparing Your Machine for Use.”

2. Refill the water container.

3. Place a T-DISC, label side down, on the T-DISC holder and close the brew mechanism.

4. Clean the bar code reading window or replace the T-DISC.

5. Remove and clean the piercing unit.

6. Descale the machine following the “Descaling” procedure.

7. Contact Tassimo Customer Service 1-877-TDISCS1 (1-877-834-7271).

Make sure that a T-DISC is placed on the T-DISC holder and the brew mechanism is firmly closed.

Clean the bar code reading window. Replace the T-DISC. You can still enjoy your preferred drink by using the “Manual Mode.”

Ensure that you use the following recommended cup sizes:

Espresso

3 oz / 90 ml cup

Filter Coffee, Café Crema,

11 oz / 325 ml cup

Cappuccino, Latte, Tea and Chocolate

Try lowering the cup stand to fit your cup. You can also temporarily remove the cup stand and drip tray, leaving the backsplash in place.

SITUATION

Cup is placed too far away from the brew mechanism.

1. T-DISC is damaged or leaking.

2. The piercing unit is not fitted properly.

1. Drip tray is full of water.

2. Backsplash is not properly fitted.

3. Water expansion outlet is not properly descaled.

The machine may require descaling.

A cleaning disc is needed to rinse and descale the machine.

The electrical supply may not be connected properly.

SOLUTION

Adjust the height of the cup stand up to ensure that the cup is closer to the brew mechanism.

Press the start/stop button to stop the brew cycle. Slowly open the brew mechanism, remove the T-DISC, and clean the inside of the brew mechanism. Remove and refit the piercing unit.

1. Empty the removable drip tray.

2. Remove and refit the backsplash, cup stand, and drip tray back on the machine.

3. Clean the water expansion outlet using a clean cloth moistened with white vinegar.

Descale the machine following the “Descaling” procedure.

Contact Tassimo Customer Service 1-877-TDISCS1 (1-877-834-7271).

Check that the machine is properly plugged into the electrical supply. Check the on/off switch at the back of the machine.

Subject to change without notice.

For USA Only

Service and Warranty

How to obtain service in the USA.

If you have questions regarding your Tassimo machine and/or questions related to where to buy T-DISCS, please call 1-877-TDISCS1 (1-877-834-7271) to speak to a Tassimo Customer Service Representative.

The Customer Service Representative can also assist you should your machine require service and/or replacement parts. The Customer Service Representative will refer you to the authorized Braun Service Center closest to you.

To obtain service once you receive the authorized Braun Service Center Information:

A. Take the product into the authorized Braun Service Center, OR B. Ship the product to the authorized Braun Service Center. Package the product

well. Ship the packaged machine prepaid and insured (recommended). Please include a note with your complete name, address, telephone number and a description of the issue with your machine.

In both cases, please provide a copy of your proof of purchase to verify warranty coverage, if applicable.

Limited 2-Year Warranty

Braun warrants this Braun appliance to be free of defects in material and workmanship for a period of two years from the date of original purchase at retail.

If the appliance exhibits such a defect, Braun will, at its option, repair or replace it without cost for parts and labor. The product must be carried in to or shipped, prepaid and insured (recommended), to an authorized Braun Service Center. Proof of date of original purchase is required.

The cost to ship the product to an authorized Service Center is the responsibility of the consumer; the cost to return the product to the consumer is the responsibility of Braun.

This warranty does not cover finishes, normal wear, nor does it cover damage resulting from accident, misuse, dirt, water, tampering, unreasonable use, service performed or attempted by unauthorized service centers, failure to provide reasonable and necessary maintenance, including recharging, or units that have been modified or used for commercial purposes.

ALL IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE. IN NO EVENT WILL BRAUN BE RESPONSIBLE FOR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may have other legal rights which vary from state to state.

For Canada Only

Service and Warranty

How to obtain service in Canada.

To obtain service once you receive the authorized Braun Service Center information:

A. Take the product into the authorized Braun Service Center, OR B. Ship the product to the authorized Braun Service Center. Package the product well.

Ship the packaged machine prepaid and insured (recommended). Please include a note with your complete name, address, telephone number and a description of the issue with your machine.

In both cases, please provide a copy of your proof of purchase to verify warranty coverage, if applicable.

Limited 2-Year Warranty

In the event a Braun appliance fails to function within the specified warranty period because of defects in material or workmanship, and the consumer returns the unit to an authorized service center, Braun Canada will, at its option either repair or replace the unit without additional charge to the consumer. This warranty does not cover any product which has been damaged by dropping, tampering, servicing performed or attempted by unauthorized service agencies, misuse or abuse. This warranty excludes units which have been modified or used for commercial purposes.

To the extent allowed by law, Braun Canada shall not be responsible for loss of the product, loss of time, inconvenience, commercial loss, special or consequential damages.

The provisions of this warranty are in addition to and not a modification of or subtraction from the statutory warranties and other rights and remedies contained in applicable provincial legislation.

14 Service and Warranty Service and Warranty 15

+ 21 hidden pages

BRAUN TA1080 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual