Braun A1 series, Millenium NL Series, Millenium A1 Series Service Manual

Service Manual for:

CA

CA

Millennium

HZg^Zh

HZg^Zh

Public Use Wheelchair Lifts

Series A1

DOT — Public Use Lift

DOT — Public Use Lift

“DOT — Public Use Lift” verifies that this platform lift meets the
“public use lift” requirements of FMVSS No. 403. This lift may be
installed on all vehicles appropriate for the size and weight of the
lift, but must be installed on buses, school buses, and multi­purpose passenger vehicles other than motor homes with a gross
vehicle weight rating (GVWR) that exceeds 4,536 kg (10,000 lb).

A1

W

A

R N I N G

Man

ual

"Providing Access to the World"

International Corporate Hdqrs: P.O. Box 310 Winamac, IN 46996 USA

1-800-THE LIFT [phone] FAX: [phone]

Patent #5,261,779

Patent #5,261,779

Patent #5,261,779

Patent #5,261,779

Patent #6,065,924

Patent #6,065,924

Patent #6,065,924

31668 Rev. A

January

2008

Patent #6,065,924

Patent #6,238,169

Patent #6,238,169

Patent #6,238,169

Patent #6,238,169

Patent #6,464,447

Patent #6,464,447

Patent #6,464,447

Patent #6,464,447

®
®

Patent #6,599,079

Patent #6,599,079

Patent #6,599,079

Patent #6,599,079

Patent #6,692,217

Patent #6,692,217

Patent #6,692,217

Patent #6,692,217

Patent #6,739,824

Patent #6,739,824

Patent #6,739,824

Patent #6,739,824

Patents Pending

Patents Pending

Patents Pending

Patents Pending

Read manual
before installing
or servicing lift.
Failure to do so
may result in
serious bodily
injury and/or
property damage.

Braun NL Series

Braun NL Series

NL917IB

e5*72/245*95/54*0110*00

1-800-THE LIFT™

BRAUNLIFT.COM™

The Braun Corporation

DOT Public Use Lift MODEL#

Max. Lifting Capacity - 800 lbs.

PATEN T
PENDING-

5,261,779-6,065,924-6,238,169-6,46

4,447-6,599,079-6,692,217-6,739,824

MFG DATE

56 14CG

PUMP CODE CYLINDER

A1-00025

SERIAL NUMBER

01/24/05

OWNER'S WARRANTY REGISTRATION

PURCHASED FROM

DATE INSTALLED

NAME

ADDRESS

CITY

TELEPHONE

TO VALIDATE WARRANTY

REGISTRATION CARDS MUST BE RETURNED TO THE BRAUN CORPORATION.

OWNER

STATE ZIP

Congratulations

We at The Braun Corporation wish to express our fullest appreciation

on your new purchase. With you in mind, our skilled craftsmen have designed and
assembled the finest lift available.
This manual provides service-related material. Refer to the FMVSS No. 403
Quick Reference Installation Sheet for installation instructions, operating instructions
and maintenance procedures.
Braun Millennium Series™ lifts are built for dependability and will provide years
of pleasure and independence as long as the lift is installed and serviced as specified
by a Braun certified technician, and the lift is operated by an instructed person.

Sincerely,
THE BRAUN CORPORATION

Ralph W. Braun
Chief Executive Officer

Warranty and Registration Instructions

Immediately upon receiving the lift, examine the
unit for any damage. Notify the carrier at once

Series No. Pump Code

Serial No.Model No. Cylinder Code

with any claims.

NL917IB-A1-00025-56-14CG

Two warranty/registration cards (shown right) are
located in the lift-mounted manual storage pouch.
The sales representative must process one of the
cards. The consumer must fill out the other card
and mail it to The Braun Corporation. The war­ranty is provided on the back cover of this manual.
The warranty cards must be processed to

Sample Warranty/Registration Card

activate the warranty.

Two Braun Serial No./Series No. identification tags (shown below) are posted on the lift.
One I.D. tag is posted on the opposite pump side vertical arm. A second I.D. tag is located
on the opposite pump side tower. Both I.D. tags provide the product identification infor­mation provided on the warranty/registration card. Record the information in the space
provided (or document on a copy). This information must be provided when filing
a warranty claim or ordering parts.

Model No.

Sample Serial No./Series No. Identification Tag

Series No.

Serial No.

Pump Code

Cylinder Code

Date of Manufacture

#ONTENTS

Troubleshooting

Lift Electrical Schematic .............................................. 2

Lift Wiring Diagram ...................................................... 3

Switch and Sensor Locations ..................................... 4

LCD Error Codes .......................................................... 5

Hydraulics

Hydraulic Schematic .................................................... 6

Hydraulics Parts List .................................................... 7

Hydraulics Diagram ...................................................... 8

Repair Parts

Pump Module

Pump Module Parts List ......................................... 9

Pump Module Diagram ......................................... 10

Lift Exploded View

Repair Parts List ....................................................11

Exploded View ........................................................ 12

Page 1

Page 2

Lift Electrical Schematic

BK(6)

BK(4)

GN(20)

GN

WH

GNGNGN

BKBKBKRDWH

RD

YL(20)

YL(20)

RD(20)

RD(20)

BU(20)

BK(20)

GN(20)

GN(20)

RDORGN

WH

RD

RD

BK

BU(16)

GN(20)

GN(20)

GN(20)

PK(20)

WH(20)

WH(20)

GN(20)

GN(20)

GN(20)

LT. GN / GN(18)

GN(14)

BK(18)

UP/FOLD

SOLENOID

RD (2)

PUMP

1

2

3

4

RD(14)

CIRCUIT
SENTRY

(CIRCUIT BREAKER)

PLATFORM LIGHTS (OPTION)

INTERLOCK

RD(4)

RD(2)

HYDRAULIC

(UP)

M

POWER

STUD

PUMP BODY

GROUND

PUMP BODY

GROUND

RD(20)

DOWN

SOLENOID

M

BATTERY

CHASSIS GROUND

CIRCUIT BREAKER

CONNECTORS

JUNCTION

MOTOR

MICROSWITCH

PRESSURE SWITCH

DIODE

SWITCH

SOLENOID

SYMBOLDESCRIPTION

SOLENOID

NOTE: ALL WIRES ARE 22 GA.
UNLESS OTHERWISE NOTED.

LIFT CONTROL MODULE

LED

COUNTER

MAGNETIC SWITCH

LIGHT

BEEPER

DUAL RELIEF

SOLENOID

UP

MICROSWITCH

UNFOLD

MICROSWITCH

INTERLOCK

LED

COUNTER

STOW / IB

MICROSWITCH

THRESHOLD

WARNING

LIGHT

THRESHOLD

WARNING

BEEPER

ROLL STOP

RAISED

SENSOR

ROLL STOP

LATCHED

SENSOR

DUAL RELIEF

MICROSWITCH

NO

NC

C

NO

NC

C

NO

NC

C

NO

NC

C

NO

NC

C

RD

WH

BU(32)

YL(32)

GN(32)

RD(32)

BK(32)

WH(32)

BU(32)

YL(32)

GN(32)

RD(32)

BK(32)

WH(32)

GN(20)

RD(14)

RD

BK

BK

P30 J30

GN

GN
WH

WH
RD

RD

POS.+

E

NEG. -

BK

BK

GN

GN

8

5

76423

1

12

9

10

11

J3

8576423112910

11

P3

1

3

424

2

1

3

00000

+

E

-

00000

SWITCH BOX

LIFT

654

3

J2

654

3

P2

22

11

2

1

J4

2

1

P4

UP

DOWN

UNFOLD

FOLD

4

3

4

3

55

66

2
1

J21

4
3

5

6

7

8

9

2
1

P21

4
3

5

6

7

8

9

1

2

J9

1

2

P9

212

1

121

2

BK(20)

BU(16)

RD(20)

WH(20)

WH(20)

PK(20)

1

6

J8

1

6

P8

3

2

3

2

44

55

2

1

P6

2

1

J6

J13

4

3

4

3

55

66

5678342

1

GN(20)

GN(20)

RD(18)

RD(20)

BK(18)

BK(18)

BK(18)

WH(20)

GY/RD(18)

RD(20)

GY / RD

YL / LT. BU

BK(18)
RD(18)

BK(18)

BK(24 GA COPPER)

BK(24 GA COPPER)

BK/WH(24 GA SILVER)

BK/WH(24 GA SILVER)

BK(18)

GY/RD(18)

BK(20)

BK(20)

GY/RD(18)

2

1

J7

2

1

P7

3

44

3

1

2

1

2

1

2

1

2

BK(18)

RD(18)

BK(20)

RD(20)

RD(18)

BK(18)

WH(20)

GN(20)

VEHICLE SECURE SIGNAL +12V INPUT

LIFT STOWED SIGNAL +12V OUTPUT

13

154147121011178

9

18

J5

13

154147121011

17

8

9

18

P5

P28J28

P16

J20P20

J20P20

J16

P16

J16

1

2

1

2

P32

J32

665 5

16 16

3 3

1 1

2 2

WH

BU

BK

SN

2

3

2

3

11

BU(20)

BK(20)

OR(20)

3

2
2

3

11

J25

P25

J26

P26

P27

YL(26)
RD(26)
GN(26)

RD
OR
GN

2
3

1

P27

J27

2
3

1

J27

YL(26)
RD(26)
GN(26)

WH
BL
BK

2
3

1

P26

2
3

1

J26

BRIDGE

MICROSWITCH

MAGNET

FRONT PUMP

ONLY

SN

MAGNET

OR
RD
GN

YL(26)
RD(26)
GN(26)

IB RAISED

SENSOR

THRESHOLD

SENSOR

SN

232

3

11

MAGNET

WH

WH(20)

WH(20)

VT(20)

VT(20)

OR(20)

ORRDGNWHBK

2

1

2

1

NO

NC

C

BU(16)

BU(16)

BU(16)

RD

RD

BK

BK

GN

GN

WH

WH

BK

RD

WH
GN

SN

MAGNET

LIFT POWER SWITCH

J29P29

BK

BK(24)

BK(24)

IB OCCUPANCY

SENSOR

SN

22

11

MAGNET

BK(24)

BK(24)

BK(20)

BK(20)
RD(20)

212

1

P31J31

STOW INTERLOCK

SENSOR

SN

MAGNET

1

2

1

2

J15

P15

121

2

P15

J15

5678342

1

P13

BK

RD

PRESSURE

SWITCH

Page 3

Lift Wiring Diagram

Platform Lights (Option)

Circuit Sentry

(

Circuit Breaker)

Bat.

Aux.

Lift
Power Cable
205-0712-37

Pump Module

Power Feed

26082A-4

Connects to

Vehicle Battery

(+) Positive Post

Lead Wire

13362A

GN(20)

BK(20)

RD(14)

RD(20)

or

Note polarity of diode. It
must be oriented as shown.
Detail at left shows two different
styles of diode identification.

LT. GN / GN(18)

GN(14)

RL3

BK(4)

GN(20)

GN(20)

WH(20)

GN(20)

RD(14)

Pump Ground

Ground

BU(16)

FS2

FS10

FS3

FS5FS8

FS9

FS12

FS13 FS14

FS7

FS4

FS1

FS11

RD(20)

WH(20)

GN(20)

PK(20)

Note: Shown with lift in stowed position.

Up/Fold

Solenoid

Motor Power Feed Wire

Beeper

Threshold

Warning

Light

Roll Stop

Raised Sensor

Rollstop Extension

(Front Pump Only)

Roll Stop

Latched Sensor

Lift
Control
Module

Interlock LED

Back
Plate

(Side view of

solenoids removed

from pump.)

Hydraulic

Pump

J7

Switch Box

BLACK (20 GA.)

BLUE (20 GA.)

ORANGE (20 GA.)

GREEN (20 GA.)

YELLOW (20 GA.)

RED (20 GA. )

NOT USED

VIOLET (20 GA.)

WHITE (20 GA.)

6

5

4

3

2

1

COLORNO.

18-COND WIRE CODE

7

8

9

J9

J8

J4

J3

B

A

T

A

U

X

GN(20)

GN(20)

BN(20)

31337A

P29 J29

J28 P28

J25 P25

P26

J26

P27

P8

P5

P3

P4

P9

P6

P7P16

P20

FS18

Pin #3

Pin #4

FS19

J20

P20

J20

J21P21

J16

P16 J16

RL5 RL6

RL7

RL2

RL1

RL4

J27

31030A45

31010FA - Front Pump

31010RA - Rear Pump

30433A60 31208A

985-A1534NA

915-1535NA

+

-

321

UP

DOWN

UNFOLD

FOLD

Down

IB Raised

Sensor

IB Occupancy

Sensor

Counter

Interlock

Connection

BLACK

WHITE

NOT USED

GREEN

ORANGE

RED

NOT USED

NOT USED

NOT USED

15

14

13

12

11

10

COLORNO.

16

17

18

Down

Dual Relief

Power

Stud

915-0530NA

VEHICLE SECURE SIGNAL +12V INPUT (GY/RD)

LIFT STOWED SIGNAL +12V OUTPUT (YL/LT. BU)

RD(4)

RD(2)

RD(2)

BK(6)

Stow

Interlock

Sensor

Lift Power

Switch

BK

RD(20)

GY/RD(18)GY/RD(18)

985-0531NA

985-0532NA

26161A

31077A

915-1538NA

915-0533NA

100063-001

RD(18)

RD(18)

RD

BK

GN(20)

WH(20)

BK(20)

BK(18)

BK(18)

31033A54

915-0537NA

31033A96

BK(18)

BK(18)

BK(18)

BK(18)

RD(18)

BK(18)

RD(18)

BK(18)

RD

GN

J6

J13

J5

+

-

-

E

+

BU(16)

BU(16)

WH(20)

VT(20)

Bridge

Microswitch

COM

NO

NC

30433A60

J26

J27

P26

P27

GREEN (26 GA.)

RED (26 GA.)

YELLOW (26 GA.)

3

2

1

COLORNO.

3-COND WIRE CODE

1
2

1
2

123

GREEN (26 GA.)

RED (26 GA.)

YELLOW (26 GA.)

3

2

1

COLORNO.

3-COND WIRE CODE

GREEN

RED

ORANGE

3

2

1

COLORNO.

3-COND WIRE CODE

321

123

BLACK (24)

BLACK (24)

2

1

COLORNO.

2 -COND WIRE CODE

BLACK

WHITE

1

2

COLORNO.

2-COND WIRE CODE

21

12

RED (J30)

GREEN (J30)

WHITE (C1)

BLACK (C2)

RED (C2)

GREEN (C1)

6

5

4

3

2

1

COLORNO.

12-COND WIRE CODE

NOT USED

GREEN (FS12)

BLACK (FS14)

RED (FS13)

WHITE (J30)

BLACK (J30)

12

11

10

9

8

7

123456

789101112

PINK (20 GA.)

BLACK (20 GA.)

BLUE (16 GA.)

RED (20 GA.)

BROWN (20 GA.)

WHITE (20 GA.) & WHITE (20 GA.)

6

5

4

3

2

1

COLORNO.

6-COND WIRE CODE

321

546

NOT USED

NOT USED

GREEN

WHITE

BLACK

RED

6

5

4

3

2

1

COLORNO.

6-COND WIRE CODE

GRAY / RED

BLACK (20 GA.) & WHITE (20 GA.)

RED (20 GA.) & GREEN (20 GA.)

NOT USED

4

3

2

1

COLORNO.

4-COND WIRE CODE

21

43

Dual

Relief

Bridge

1

2

GRAY / RED(18)

NOT USED

NOT USED

NOT USED

NOT USED

NOT USED

6

5

4

3

2

1

COLORNO.

9-COND WIRE CODE

NOT USED

NOT USED

BLACK(20)

9

8

7

GRAY / RED

NOT USED

NOT USED

NOT USED

NOT USED

NOT USED

6

5

4

3

2

1

COLORNO.

9-COND WIRE CODE

NOT USED

NOT USED

YELLOW / LT. BLUE

9

8

7

1

23

4

5

6

7

8

9

2

1

1
2

1
2

2

121

2

1

1

2

2

1

1

2

2

1

123

456

789

FS16

FS17

Bridge

Note: All wires 22 GA.
unless otherwise noted.

P13

Pressure

Switch

BLACK

BLUE

WHITE

3

2

1

COLORNO.

3-COND WIRE CODE

321

GREEN (26 GA.)

RED (26 GA.)

YELLOW (26 GA.)

3

2

1

COLORNO.

3-COND WIRE CODE

123

GREEN

ORANGE

RED

3

2

1

COLORNO.

3-COND WIRE CODE

321

GREEN

ORANGE

RED

3

2

1

COLORNO.

3-COND WIRE CODE

123

GREEN (20 GA.)

RED (20 GA.)

YELLOW (20 GA.)

3

2

1

COLORNO.

3-COND WIRE CODE

321

BLACK

BLUE

WHITE

3

2

1

COLORNO.

3-COND WIRE CODE

123

BLACK (20 GA.)

ORANGE (20 GA.)

BLUE (20 GA.)

3

2

1

COLORNO.

3-COND WIRE CODE

✸✸✸ ✸✸

BK(24)

BK(24)

J30P30

Up

Microswitch

C-H

COM

NO

NC

Unfold

Microswitch

BK

WH

RD

985-0536NA

2

GN

N.O.

N.C.

COM.

C-H

COM

NO

NC

N.O.

N.C.

COM.

1

Stow / IB

Microswitch

C-H

COM

NO

NC

Dual Relief

Microswitch

BK

RD

C4

C3

C2

C1

4

GN

WH

N.O.

N.C.

COM.

C-H

COM

NO

NC

N.O.

N.C.

COM.

3

WHITE

BLACK

RED

GREEN

4

3

2

1

COLORNO.

4-COND WIRE CODE

43

2

1

WHITE

BLACK

RED

GREEN

4

3

2

1

COLORNO.

4-COND WIRE CODE

12

34

31337A

P31

J31

BK(20)

RD(20)

BK(24 GA COPPER)

BK(24 GA COPPER)

BK / WH(24 GA SILVER)

BK(24 GA COPPER)

BKGNWH

RD

BK / WH(24 GA SILVER)

BK / WH(24 GA SILVER)

BK(24 GA COPPER)

BK / WH(24 GA SILVER)

P15J15

J15P15

P32J32

Threshold Sensors

31221A

31221A

2

1

22

1

2

1

1

2

1

2

1

11 1013 121415161718

214356789

321

546

Switch and Sensor Locations

Pressure Switch
31199

*Unfold & Up

Microswitch Assembly
975-3121A

P

U

UNFOLD

FOLD

N
W
O
D

*Duel Relief & Up/Fold

Microswitch Assembly
975-3121A

Threshold Strip Switch
31221A (Qty. 2)

Inboard

Left

Right

Outboard

*Stow Interlock

Magnetic Sensor
31254A

*UHMW Bearing

w/Magnet
205-1760NA

*Note: Mirror image for
right (front) pump lifts.

*IB Occupancy

Magnetic Sensor
31254A

*IB Raised

Magnet
30662

*IB Raised

Magnetic Sensor
30433A37

Outer Barrier Latched
Magnetic Sensor
30433A60

*Bridging

Microswitch
31010RA
31010FA (Front Pump)

Outer Barrier Latched
Magnet
30662

Outer Barrier Raised
Magnetic Sensor
30433A60

(Rear Pump)

Outer Barrier Raised
Magnet
30662

Page 4

LCD Error Codes

Listed below are codes that the lift controller outputs
during lift operation. The codes will be displayed
on an LCD screen located on the lift control board
inside the pump module. See the Manual Operating
Instructions in the operator's manual for pump cover
removal instructions.

Millennium LCD Error Codes

Non-Flashing Numbers

01 – Platform Stowed
02 – Platform Unfolding
03 – Platform Unfolding Paused
04 – Platform at Floor Level
05 – Platform Beginning to Lower
06 – Platform Lowering (Threshold Cannot Be Occu-

pied from this Point Down)
07 – Outer Barrier Moving to Horizontal Position
08 – Platform at Ground Level
09 – Outer Barrier Moving to Vertical Position
10 – Platform Raising
11 – Platform Raising Paused at Floor
12 – Platform Folding (limited pressure)
13 – Platform Folding (full pressure)
14 – Timed Fold (Cinching Lift Tite) or (Anti-Rattle

State)
15 – Platform Folding Stopped
28 – Illegal Function/Not Defined
29 – Interlock Fault Not Recognized
30 – Platform Location Unknown
31 – Platform Location Transition State; Attempting to

Locate Position
50 – Outboard Barrier Is Not Up When Tower 4 LED Is

Not On
51 – Threshold is Occupied When Tower 2 LED Is Not

On
52 – Inboard Barrier Is Not Up and Locked When Tower

1 and Tower 4 LED’s Are On
53 – Inboard Barrier Occupied Sensor Is Not Activated

When Tower 1 and Tower 2 LED’s Are On
54 – Outboard Barrier is Occupied Before it is Up

55 – Outboard Barrier in Not Up When the Outboard

Barrier Latch is Down

56 – Outboard Barrier is Not Latched and trying to go

down after the hand control button has been re­leased. Must reset by pressing the Up button until
the outboard barrier is latched, then press down
so the platform goes to the ground level and the
outboard barrier is deployed

75 – Low Voltage Detected; must turn off power switch

to reset LCD
77 – Vehicle Secure Interlock has not been activated
99 – Controller Program is not Valid; Replace Controller

Flashing Numbers

Flashing 65 – Unfold button is pressed
Flashing 66 – Fold button is pressed
Flashing 67 – Down button is pressed
Flashing 68 – Up button is pressed
Flashing 69 – Bridge switch is activated
Flashing 70 – Outboard barrier latch switch is activated
Flashing 72 – Outboard barrier up switch is activated
Flashing 73 – Inboard barrier up switch is activated
Flashing 74 – Inboard barrier occupied switch is acti-

vated

Flashing 76 – Outboard barrier occupied switch is

activated
Flashing 78 – Threshold tape switch “A” is activated
Flashing 79 – Threshold tape switch “B” is activated
Flashing 83 – Tower #1 switch is activated
Flashing 84 – Tower #2 switch is activated
Flashing 85 – Tower #3 switch is activated
Flashing 86 – Tower #4 switch is activated

Page 5

Hydraulic Schematic

Opposite

Pump

Cylinder

Orifice

1900

PSI

BACKUP

PUMP

Down

Valv e

PUMP

Bridging

Valv e

Relief Valve

.50 GPM

Lifting

2100

PSI

M

Secondary

Valv e

Folding

Relief Valve

800
PSI

Roll Stop Fold

Pressure Switch

Roll Stop

Cylinder

Orifice

Pump Side

Cylinder

Description Symbol Description Symbol

Fixed Displacement

Pump

Pump Motor

Backup Pump

Single Acting Cylinder

Check Valve

Unfold Orifice

Manual

Shutoff Valve

Pressure Switch

Page 6

Hydraulic Port

M

2 Way 2 Position

Solenoid Valve

Pressure Compensated

Flow Control

Relief Valve

Filter Screen

Vented Reservoir

Orifice

Hydraulics Parts List

Item Qty. Description Part #

1 1 Pump Assembly (M268-0113)12V - with Reservoir/with Backup Pump) 31038-12V

2 1 Solenoid, 4-Post (See Pump Module Exploded View for Solenoid Selection)

3 1 Power Cable, Up Solenoid to Motor 29049

4 1 Motor, Pump - 12 Volt - Low RPM 31350

5 1 Elbow, 65° - Male 7/16-20 SAE O-Ring to 7/16-20 SAE O-Ring Boss 26578

6 2 Valve Assembly, “Down / Bridge” (complete) 31348K

7 3 Coil (only), “Down / Bridge” Valve - (shown below) 31122

8 2 Cartridge (only), “Down / Bridge” Valve - (shown below) 26078

9 1 Valve Assembly, “Duel Relief” (complete) 31120K

10 1 Cartridge (only), “Duel Relief” Valve - (shown below) 31121

11 1 Cap, Reservoir Filler 16935

12 4 O-Ring (only), Hand Pump Mounting 17351

13 1 Hand Pump (Backup) with O-Rings (Item 12) 26074

14 3 Screw, 1/4-20 x 2-1/4”, Allen Head 26080

15 1 Clamp, Reservoir - H-48 (M259) 17069

16 1 Reservoir, Hydraulic Fluid 16934

17 1 Fitting, 90° - 1/8” NPT x 1/8” Barb - Plastic 87563

18 1 Switch, Pressure, 7/16-20 SAE O-Ring Male 31199

19 2 Fitting, Male 7-16-20 SAE O-Ring to Male 7/16-20 JIC 37° 24504

20 1 Elbow, (1) Female 7/16-20 JIC 37 Swivel - (2) Male 7/16-20 JIC 37° 26579

21 1 Hose Assembly, 1/8” (Opposite Pump Side) 16004A-086

22 1 Hose Assembly, 1/8” (Pump Side) 16004A-046

23 2 Elbow, 90°, 7/16-20 SAE O-Ring Male - 7/16-20 JIC 37° Male, Orifice 26667

24 2 Cylinder

25 3 Elbow, 90°, 1/4” NPT Male to 1/4” Barbed 15150

26 1 Hose, Thermal Plastic - Black, 1/8” I.D. 23742R*

27 2 Connector, Plastic “Y”, 1/8” O.D. 18877

28 1 Hose Assembly, 3/16” w/Two Guards 915-2601-136

29 1 Fitting, 90° - Male 9/16-18 SAE O-Ring to Male 7/16-20 JIC 37° 87622

30 1 Cylinder, Roll Stop (Contains Items 25 & 30) 25309-05A

31 1 Handle with Grip 17206A

32 1 Diode Assembly, Up Solenoid 73906A

u

C1514.3-9408

u Seal Kits: If repairing a cylinder, order Seal Kit #1500-0500P.
* Raw material items ordered and priced per inch (order specified length).

“Down and Bridge”

6

Valve (complete)

7

Coil

#31122

8

Cartridge

#26078

9

#31122

10

Cartridge

#24612

“Duel Relief”

Valve (complete)

7

Coil

Page 7

Hydraulics Diagram

1

23

24

31

19

11

12

32

3

2

18

4

5

6

9

19

24

30

23

29

Roll Stop Cylinder

25

13

14

Manual

Backup

Pump

Opposite Pump Side Cylinder

25

Page 8

26

17

16

26

15

Hydraulic

Pump

27

26

21

27

20

22

28

25

Pump Side Cylinder

26

26

Pump Module Parts List

Item Qty. Description Part No.

1 Pump Module (complete), 12 Volt, Rear 917-A1516RNA
1 1 Pump Assembly (M268-0113) 12V-120G - Dual Relief / ARS (Includes Items 2 & 3) 31038-12V
2 1 Power Cable, Up Solenoid to Motor 29049
3 1 Solenoid, Up - 4-Post - Trombetta 31129
4 1 Diode Assembly, Up Solenoid 73906A
5 4 Nut, #10-32, Serrated Flange 83080
6 2 Fitting, Male 7/16-20 O-Ring to Male 7/16-20 JIC 37° 24504
7 1 Elbow, Female Swivel 7/16-20 JIC 37° to (2) Male 7/16-20 JIC 37° 26579
8 1 Switch, Pressure 31199
9 1 Control, Hand Pendant Assembly - Standard (Includes Items 10-18) 100063-001
10 1 Keypad, Hand Control 30000
11 1 Hand Pendant Case - Front 100027-001
12 1 Seal, Hand Control - Standard 100066-001
13 1 Module, Hand Control 100041-001
14 1 Screw, 10-32 x 1/2”, Phillip, Pan Head 82744
15 1 Hand Pendant Case - Rear 100028-001
16 1 Hanger, Round - Hand Control 73793
17 2 Screw, #4-40 x 1/4”, Phillip, Pan Head 11480
18 1 Cord, Coiled - 6-Conductor 100044-001
19 1 Shield, Electrical 31304
20 1 Control Board Assembly 100080-001
21 1 Plate, Backing / Mounting - Rear 985-0501RN
22 8 Standoff, Snap-In 31011
23 1 Cover, Pump, 2-Piece - Back
24 1 Recepticle, Clip On 28803
25 1 Lens, Threshold Warning - Red 30704
26 1 Decal, Warning / Pressure Relief Valve (Not shown - see Decal Section) 22249
27 1 Spacer, Lens - NHTSA 31386
28 1 Metal Ring Base - Lamp 30971
29 1 Socket, Lamp 30703
30 3 Screw, #8-32 x 1/2” Pan Head Phillips - Thread Cut 30974
31 1 Bulb, Light 19841
32 1 Diode, Green LED, Panel Mount 29545
33 1 Strain Relief - Liquid Tight 30753
34 1 Rivet, Snap, .201” x .217”/.256” 25973
35 2 Washer, 5/16” Flat 10063
36 2 Bolt, 5/16-18 x 3/4”, Nylock, Hex * See note below 29608
37 2 Bolt, 5/16-18 x 1/2”, Nylock, Hex * See note below 10012
38 1 Cable, Ground 26161A
39 1 Washer, 5/16” External Tooth 16368
40 1 Beeper, Continuous 30487
41 1 Switch, Toggle 12185
42 1 Decal, Lift Power - On/Off (Not shown - see Decal Section) 21494
43 1 Stud, Power Feed 26084
44 1 Rubber Boot, Red tSee note below 82046
45 1 Harness, Interlock Interface 31077A
46 1 Pump Handle with Grip 17206A
47 1 Cover, Pump - 2-Piece - Top / Front
48 3 Rivet, Pop, SD43BS - 1/8” - .13”/.19” 12954
49 1 Plug, Window - Clear 30443
50 1 Stud, Wing Head - 1/4 Turn 28804
51 1 Retainer, Push On 28805
52 1 Washer, Nylon, 1/4” I.D. x 11/16” O.D. x .030” 12690
53 1 Clip, Pump Handle - Top 915-5517
54 1 Clip, Pump Handle - Bottom 915-5518
55 1 Decal, Manual Instructions - Public (Not shown - see Decal Section) 31412
56 1 Decal, Removal / Installaton - Pump Cover (Not shown - see Decal Section) 29051
57 1 Decal, Warning - Control Board Damage - ESD (Not shown - see Decal Section) 30787
58 1 Decal, Removal / Installation Pump Handle (Not shown - see Decal Section) 29052
59 1 Decal, Installation & Warning - Hydraulic Pressure Switch (Not shown - see Decal Section) 27154
60 1 Clamp, Hose - Solenoid Mounting 29663
61 1 Ground Wire, Motor 31263A
62 1 Solenoid, 4-Post 28308MOD

(Complete Assembly 915-0513RNA Includes Items 23 - 30)

(Complete Assembly 915-0519RNA Includes Items 47 - 59) 915-0519RN

915-0513RN

* Apply red #271 Thread Locker Loctite® to the four hex bolts (items 36 and 37) if a blue nylon patch is not present on

the bolts when retrofitting an M268-0113 pump assembly. Loctite® is available from The Braun Corporation under part
number 11522.

t Indicates items available for replacement part purposes only. These items are not included with replacement pump

modules.

Page 9

Pump Module Diagram

Pump Mounting Bolts

Apply red #271 Thread Locker Locktite®
to the three pump mounting bolts (items
37 and 38) if a blue nylon patch is not
present on the bolts when retrofitting an
M268 pump assembly. Loctite® is
available from The Braun Corporation
under part number 11522-1.

8

12

11

10

9

UP

UNFOLD

FOLD

DOWN

17

14

13

50

48

52

45

15

16

52

16

26

32

28

29

25

30

46

47

21

24

31

33

49

44

51

18

37

36

43

19

20

38

39

40

41

34

1

2

22

23

6

4

Backplate Mounted Solenoid

7

5

57

4

-OR-

5

3

Pump Mounted Solenoid

58

42

Page 10

Repair Parts List

Part Numbers of Items Dedicated per Lift Model

Item Qty. Description NL917IB

1 1 Base Weldment 985R1148KS33

2 1 Cover, Pump, 2-Piece, Back-Bottom 915-0513RNA
3 1 Cover, Pump, 2-Piece, Top-Front Assy. 915-0519RNA
4 1 Platform Weldment 917-03350NW
5 1 Outer Barrier Assembly (inc. 5,13,31,168,181) 915-0312NA33Y
6 1 Inner Roll Stop 915-0147NWY
7 1 Bridge Switch Assembly 31010RA
8 1 Block, Platform Stop - Bridging - Rear 25778
9 1 Block, Platform Stop - Bridging - Front 900-0311
10 1 Plate, Backing/Mounting Rear 985-0501RN

Part Numbers of Items Identical on All Lift Models

Item Qty. Description Part No. Item Qty. Description Part No.

11 1 Bag, Vinyl - 7" x 10" 31174
12 3 Washer, #10, Flat, Auto BK 11541
13 2 Rivet, Pop, 3/16" x .06"/.13" 11512
14 8 Washer, .516" I.D. x 1" O.D. x .0269", Auto BK 15328
15 4 Washer, Finger, Disc Spring 27276
16 4 Snap-Ring 1/2" 13273
17 4 Snap-Ring 5/16" 24570
18 4 O-Ring, 5/16" I.D. x 1/16" O.D. 26614
19 2 Screw, Socket Head, 3/8-16 x 1/2" with 1/2" Shoulder 25929
20 1 Grommet, I.D. .281"/ FR.125" x GD.625"/T.375" 27725
21 1 Pivot, Roll Stop Lever 24550
22 11 Rivet, Pop, 1/8"- .13"/.19" 12954
23 1 Stud, Wing Head 28804
24 1 Retainer, Push-On 28805
25 1 Grommet, ID .312", FR .250", GD .813" T500" 27726
26 1 Pump Assembly 31038-12V
27 10 Pin, Pivot, Parallel Arm 917-0403
28 10
29 1 Receptacle, Clip-On 28803
30 1
31 1 Rubber Nose, 33" 24603-33
32 1 Latch Assembly, Roll Stop 915-4343NA
33 2 Bolt, 5/16-18 x 1/2" Nylock, Hex 10012
34 2 Washer, 5/16" Flat 10063
35 2 Bolt, 3/8-16 x 1/2" Nylock, Hex 29729
36 6 Bolt, 5/16-18 x 3/4", Button Head, Soc Cap Hd 24440
37 2 Microswitch Assembly 975-3121A
38 2 Bolt, 5/16-18 x 3/4" Nylock, Hex 29608
39 1 Rivet, Pop, SD68 BSLF-3/16" - .38"/.50" 15244
40 1 Parallel Arm Assy., Top-Front w/Bearings 915-0437FA
41 4 Bearing, Flange, 1/2" x 1/4" 24442
42 1 Weldment, Latch, Lift/Tite, Rear 27013RW
43 1 Weldment, Latch, Lift/Tite, Front 27013FW
44 2 Screw, #4-40 x 5/8", Round Head 14810
45 1 Clip, Cable, 5/16", Plastic 26948
46 1 Screw, #8-32 x 1", Mach. Truss Head 19912BK
47 2 Nut, #4-40 w/Lockwasher 19537
48 2 Nut, #8-32, Hex 10777
49 1 Parallel Arm Assy., Top-Rear w/Bearings 975-2437RA
50 2 Cylinder, 14.625"/29.146" Retracted C1514.3-9408
51 1 Parallel Arm Assy., Bottom w/Bearings and Sensors - Rear 985-1458NA
52 16 Bearing, Flange, 3/4" x 3/8" 24011
53 8 Bushing, 3/4" I.D. x 1/2" 900-0456
54 1 Vertical Channel Weldment, Front, 48" 955-0448FNW
55 1 Cover, Plastic, Parallel Arm, O/S Front-w/Tape 915-0704NA
56 2 Tape, 1" Wide S-Face Foam, x 14" (1 Shown) 82015R014
57 6 Tape, 1" Wide S-Face Foam, x 10" (3 Shown) 82015R010
58 1 Cycle Counter-LCD Without Reset 30547
59 2 Handrail Weldment 985-0618NW
60 8 Rivet, Push In - 8MM 30063
61 4 Bumper, Rubber, 31/32" O.D. 10950
62 2 Screw, #8-18 x 1/2", Self-Tap, Phillips 13583
63 2 Bulb, Light 20-W, Halogen Reflector 31060
64 2 Bolt, Carriage, 1/4-20 x 3/4" 13434
65 1 Base, Cover -33" 975-0148CN33
66 2 Washer, 3/8" Flat, Black 10064
67 4 Nut, 3/8-16, Hex Lock 13617
68 2 Cotter Pin, 1/4" x 2", Black 15886BK
69 1 Cam Wmt, Microswitch, Opposite Pump Side 985-0834NW
70 1 Cover, Plastic, Parallel Arm, I/S Front-w/Tape 975-0701NA
71 2 Threshold Strip Switch 31221A
72 4 Screw, 1/4-20 x 1/2" FHSCS 18860
73 8 Washer, Finger Disk Spring 30772
74 10 Washer, 1/2" Flat Black Zinc 25346
75 2 Bolt, 3/8-16 x 1", Hex 10025
76 6 Washer, 3/8", Lock, Black 10069BK
77 2 Lever, Inboard Barrier 985-0404N
78 4 Clamp, Insulate, 1 3/8" I.D. 29765
79 2
80 2 Gas Spring, Fold Arm 29186
81 2 Ball Stud, Gas Spring, 13MM x 3/8-16 F. Thread 29185
82 2 Washer, 3/8", Lock 10069
83 1 Spacer, Flap Cylinder .184" Thick 915-0416
84 2 Clip, Safety, 3/8-16 x 3/4", Flange 12608
85 6 Bolt, 3/8-16 X 3/4", Flange Button Head, Socket Cap 25171
86 2 Bolt, 5/16-18 x 2", Flange, Hex 25130
87 2 Nut, 5/16-18, Serrated Flange 25131
88 2 Arm, Slide Support 985-6612N
89 2 Slide, Platform, Rotate, Weldment 985-0606N
90 2 Spacer, .5" O.D. x .334" I.D. x 1.515" LG 25132
91 10 Bearing, Flange, 3/4" x 1/4" 24012
92 2 Weldment, Platform Pivot Arm - 48"
93 2 Pin, Pivot, Lower Arm 900-0413N
94 6 Ring, Snap, 3/4", External 18657
95 2 Bearing, UHMW, Flat, 1.226" 205-1760
96 2 Ball Stud, 10MM 21301
97 1 Vertical Channel Weldment, Rear 955-0448RNW
98 6 Plastic End Cap, 1" I.D. x 1 1/4" O.D. 20474

Screw Drive #8 x 3/16" Long Black

Cylinder Assembly, Roll Stop (inc. Fittings & Items 30 & 123)

Washer, 5/16" Lock, Black

31086BK

25309-05AK

10068

985-0640NW-BKN

99 2 Grip, Handle, Yellow 19074
100 2 Spring, Dampener, Retract 26963
101 2 Bolt, 5/16-18 x 1 1/4" Low Socket Hd., Cap, Bk. 26327
102 2 Bumper, 1"x 5/8" Long 33603
103 2 Screw, 1/2-20 x 1 1/2" Set Lock, Black 18663
104 2 Block, Guide-Platform Stow 28593

105 2 Pin, Platform 975-2325

106 10 Screw, 5/16-18 x 3/4", SHFS 25527
107 2 Spacer, UHMW, Vertical Channel 995-0320
108 2 Nut, 1/4-20 Nylock 14614
109 2 Bracket, Mounting, Quiet Ride 915-0392
110 2 Gas Spring, 12.2" Extended/8.3" Compressed 30550A
111 2 Bolt, 5/16-18 x 3/4", Carriage, Black 15858BK
112 3 Washer, 5/16", External Tooth 16368
113 4 Nut, 5/16-18 Hex 10058
114 2 Bracket, Inner Side Panel Guide 915-0703
115 3 Bearing, UHMW, Flat, Thin, Black 916-5406
116 2 Pivot, Bridge Plate Lever, Upper, Inside 916-5433
117 4 Bearing, Flange - 3/4" x 1/2" 24027
118 1 Spacer, UHMW, Latch 950-7760
119 1 Spring, 1/4" x 1" Extension w/Hooks 10774
120 1 Tubing, Polyurethane - 1/4" I.D. x 1/2" O.D. x .81" 28630R000.81
121 2 Pin, Clevis, 3/8" x 3", Black 24932BK
122 1 Pin, Platform Cylinder 915-0414
123 2 Ring, Snap, 1/2", External, .035" Thick 20946
124 1 Weldment, Tube-IB Fold Arm-Rear 985-0625RNW
125 1 Lever, Roll Stop Latch (Assembly #915-0345A) 915-0435
126 4 Nut, 3/8-16, Hex 10059BK
127 1 Weldment,Tube-IB Fold Arm-Front 985-0625FNW
128 1 Pivot, Roll Stop Cylinder, Front 990-0352
129 2 Bolt, 5/16-18 x 1 1/2" Hex Head, Cap 10014
130 2 Bolt, 7/16-20 x 1", SHCS, w/Nylock Patch 28474
131 4 Screw, #10-32 x 3/8", Flat Head, Hex 24537
132 3 Adapter, Cylinder/Roll Stop Lever-Out 990-0341
133 4 Nut, #10-32, w/Lockwasher 18349
134 6 Rivet, Pop, 3/16"-.25"/.38", Black 14993
135 1 Adapter, Cylinder/Roll Stop Lever 915-0341N
136 2 Harness, Sensor - Cherry w/Plug 30433A60
137 4 Rivet, Snap, Black, .158/.197 Thick 25759
138 4 Clamp, Cable, 1/2", Plastic 10092
139 2 Nut, 5/16-18, Top Lock, Black 28324BK
140 2 Bolt, 1/4-20 x 1/2", Button Head Socket 15733
141 2 Bolt, 3/8-16 x 2", Hex Head, Cap 10027
142 2 Roller Assembly 1000-2395A
143 2 Roller Retainer 915-5353
144 2 Nut, 5/16-18 Hex, Lock 11387BK
145 2 Pivot, Bridge Plate Lever, Upper-Outer 916-5434
146 6 Clamp, 1/4" I.D.- Nylon Loop 84396
147 2 Clip, Hand Control Hanger 84389
148 12 Rivet, Snap, .201" x .256"/.295" 26362
149 4 Bearing, Flange, 1" x 1/2-16FDU08 28031
150 1 Cover, Plastic, Parallel Arm, O/S Rear-w/Tape 915-0702NA
151 1 Weldment, Bridgeplate Bracket, Front 985-0431FNW
152 4 Spacer, Handrail, .375” Thk. UHMW 995-0301
153 2 Washer, .516" I.D. x .75" O.D. x .250", Black 25336
154 1 Cover, Plastic, Parallel Arm, I/S Rear-w/Tape 975-0703NA
155 1 Weldment, Bridgeplate Bracket, Rear 985-0431RNW
156 2 Spring, Torsion - .366 I.D. x .05" 30386
157 4 Spacer, IB Lock 30394
158 2 Weldment, IB Lock 985-0630NW
159 4 Bearing, 3/8" I.D. x 1/2" Long 30405
160 4 Roller, .65" O.D. x 1/2" Long 985-0631N
161 4 E-Clip, 3/8" Shaft 84383
162 2 Spacer, Handrail, .230" Thk. UHMW 911-5301
163 1 Magnet - Sensor Ring 30662
164 1 Harness, Sensor - Magnetic w/Plug 31030A45
165 1
166 2 Bearing, Flange, 3/8" x 1/4" - Plastic 24028
167 2 Light Assy, Vertical Channel 31062A
168 1 Tab, Outer Barrier - Assembly 915-6367NA
169 1 Washer, .4" I.D. x .810" O.D. x .12" 24536
170 4 Spacer, UHMW-.75" O.D. x .39" I.D. x .25" 30227
171 1 Bolt, 3/8-16 x 3/4" Soc. Hd. Cap Screw Bk. 26259
172 1 Spacer, Flap Cylinder .700" Thick 915-0415
173 1 Guard, Rollstop Sensor Wires 915-0368N50Y
174 1 Parallel Arm Assy., Bottom w/Bearings-Front 985-0457NA
175 4 Screw, #10-32 x 1/2" Button Head, Socket, Cap 30375
176 1 Bearing Assy., UHMW Flat w/Magnet 205-1760NA
177 1 Slide, UHMW,Platform Rotate, Magnet 31009
178 3 Rivet, Pop, 3/16" - .13/.25" - SD64BS 11513
179 2 Harness, Sensor-Reed 31254A
180 4 Screw, #4-40 x 1/4" Phillips Pan Head, Thread Cut 31043
181 1 Screw, 10-32 x 5/8" Pan Head Phillips, Thd. Cut 26714
182 1 Adapter, Cylinder/Roll Stop Lever 915-0344
183 1 Rivet, Snap, Black, .201" Hole x .217"/.256" Thick 25973
184 2 Bolt, 1/4-20 x 1", Hex 10001
185 2 Nut, 1/4-20, Hex 10057
186 2 Washer, 1/4" External Tooth 83588

Rivet, Snap, Black, .201" Hole x .177"/.217" Thick

30408

Page 11

Page 12

Lift Exploded View

53

114

111

109

104

113

53

53

53

50

53

53

109

111

6

79

113

53

53

180

179

50

162

85

77

115

115

115

85

149

107

89

149

107

2

29

33

38

34

35

10

26

112

104

113

112

112

36

36

1

52

52

52

40

52

52

52

174

134

134

52

52

52

114

146

146

148

148

52

52

49

52

52

52

51

134

52

52

94

117

117

74

12

11

106

74

106

27

28

18

14

14

43

27

100

17

16

28

17

100

18

74

106

27

28

98

98

98

98

65

58

58

73

72

14

16

14

15

78

12

17

17

42

27

28

78

134

78

12

113

79

7

37

36

36

37

74

106

94

117

117

162

145

76

66

75

127

129

144

161

160

159

157

156

157

158

19

159

160

161

163

165

73

73

73

61

59

99

62

80

129

144

161

160

159

157

156

157

158

154

110

68

98

97

124

130

60

91

91

152

91

152

87

86

91

90

170

94

89

176

177

150

145

19

66

76

75

93

94

138

146

146

45

148

138

148

148

148

141

85

88

57

57

60

148

148

60

147

22

60

82

159

160

161

84

81

74

106

148

178

175

74

106

138

138

27

28

27

28

63

167

27

28

74

106

148

148

67

146

92

67

110

96

44

47

92

164

166

61

59

62

130

99

91

91

93

80

84

152

91

152

86

87

91

88

90

170

94

68

54

70

55

67

98

60

60

60

60

141

82

81

74

106

74

167

63

106

74

106

27

28

27

28

27

28

94

95

67

96

146

148

175

85

78

134

15

147

22

69

108

64

72

72

72

180

179

136

83

122

123

22

22

22

22

123

141

142

143

30

172

103

103

139

149

139

149

32

119

118

173

171

61

61

178

105

25

48

8

48

46

20

41

41

125

128

182

101

143

9

30

169

4

131

132

141

142

166

120

13

13

166

121

121

5

31

168

137

136

181

101

131

135

39

20

132

131

21

22

23

24

3

33

56

57

71

71

116

41

14

16

153

77

91

76

116

15

14

126

91

76

151

16

153

15

126

155

186

185

185

41

184

184

102

102

186

"Providing Access to the World"

®

Over 300 Braun

Dealers Worldwide

"Providing Access to the World"

International Corporate Hdqrs: P.O. Box 310 Winamac, IN 46996 USA

1-800-THE LIFT [phone] FAX: [phone]

®

Service Manual for:

The Braun Corporation of Winamac, Indiana, warrants that it will repair (or replace at
Braun’s sole option) any defect in material or workmanship in its wheelchair lift for five years*,
providing the lift is installed, operated and maintained properly. This warranty is limited to the
original purchaser and does not cover defects in the motor vehicle on which it is installed, or
defects in the lift caused by a defect in any part of the motor vehicle.
This warranty commences on the date the lift is put in service, providing the warranty
registration card is completed and received by The Braun Corporation within 20 days of purchase.
If no warranty card is received, the warranty will expire three years from the date of manufacture
as identified on the lift serial number tag.
This warranty also covers the cost of labor for the repair (or replacement at Braun’s sole
option) of parts for three years when performed by an authorized Braun representative. (A labor
schedule determines cost allowance for repairs and is available upon request).
This warranty does not cover normal maintenance, service, or periodic adjustments
necessitated by use or wear. The Braun Corporation will not, under any circumstances, pay for loss
of use, incidental, or consequential damages related to the lift or vehicle in which it is installed.
This warranty will become null and void if the lift has been damaged through accident,
misuse, or neglect, or if the lift has been altered in any respect.
* The five-year portion of this warranty covers the following lift’s power train parts:

• Cable • Cylinder • Flow Control • Gear Box • Motor • Pump • Hydraulic Hose & Fittings

• Solid State Controller
All remaining lift components are covered by a three-year warranty.

CA

CA

Millennium

HZg^Zh

HZg^Zh

Braun™Five-Year

Limited Warranty

Series A1

A1

Public Use
Wheelchair Lifts

Return Authorization Procedure

When processing any warranty claims (parts, repairs, etc.), all requests must be processed through The

Braun Corporation Product Support Department. Call 1-800-THE LIFT (extension 3009) during normal

working hours. Product Support will issue a Return Material Authorization (RMA) number and detail the

procedures required for processing returns and/or authorizing credit.

The lift identification information is provided on the Braun Serial No./Series No. identification tag and

the two warranty cards (shown on inside front cover). The lift identification information must be

provided when filing a warranty claim or ordering parts.

Braun NL Series

Braun NL Series

31668 Rev. A

31668 Rev. A

January 2008

January 2008

All illustrations, descriptions and specifications in this manual are based on the latest product information available at the

All illustrations, descriptions and specifications in this manual are based on the latest product information available at the

time of publication. The Braun Corporation reserves the right to make changes at any time without notice.

time of publication. The Braun Corporation reserves the right to make changes at any time without notice.

Patent #5,261,779

Patent #5,261,779

Patent #6,065,924

Patent #6,065,924

Patent #6,238,169

Patent #6,238,169

"Providing Access to the World"

International Corporate Hdqrs: P.O. Box 310 Winamac, IN 46996 USA

1-800-THE LIFT [phone] FAX: [phone]

Patent #6,464,447

Patent #6,464,447

Patent #6,599,079

Patent #6,599,079

Patent #6,692,217

Patent #6,692,217

Patent #6,739,824

Patent #6,739,824

Patents Pending

Patents Pending

© The Braun Corporation

© The Braun Corporation

®
®