Thank you for purchasing a Braun product.
Our products are designed to meet the highest
standards of quality, functionality and design. We
hope you are completely satisfied with your new
Silk·épil.
If you have any questions, please call:
US residents1-800-BRAUN-11
1-800-272-8611
Canadian residents(905) 712-5400
Merci d’avoir fait l’achat d’un produit Braun.
Nos produits sont conçus pour satisfaire
aux plus hautes exigences en matière de qualité,
fonctionnalité et design. Nous espérons que vous
serez pleinement satisfaite de votre nouveau
Silk·épil.
Si vous avez des questions, veuillez appeler
Braun Canada : (905) 712-5400
Gracias por haber comprado un producto Braun.
Nuestros productos son elaborados para
satisfacer los más altos estandares de calidad,
funcionalidad y diseño. Esperamos que Ud.
quede completamente satisfecha con su nueva
Silk·épil.
Si Ud. tiene alguna duda, por favor llame al:
México: 01 800 508 58 00 o 387 19 41
Argentina: 0 800 44 Gillette (445 53)
Columbia: 9 800 5 Braun (272 86)
Venezuela: 0 800 Gillette (445 53 88)
Peru: (1) 372 77 27
5–316-438/00/lX-01
USA/CDN/Mex.
Printed in France
Imprimé en France
Impreso en Francia
Internet:
www.braun.com
1
2
2
1
1
0
0
2
2
1
0
0
2
90°
3
4
90°
5
6
2
2
1
1
0
0
7
2
2
1
1
0
0
2
2
1
1
0
0
5
English
IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance, basic precautions should always be
followed, including the following:
Read all instructions before using your Silk·épil SuperSoft hair remover.
DANGER
To reduce the risk of electric shock:
1. Do not reach for an appliance
thas has fallen into water.
Unplug immediately.
2. Do not use while bathing or in a
shower.
3. Do not place or store appliance
where it can fall or be pulled into
a tub or sink. Do not place in or
drop into water or other liquid.
4. Always unplug this appliance
from the electrical outlet
immediately after using.
5. Unplug this appliance before
cleaning.
FOR HOUSEHOLD USE
SAVE THESE INSTRUCTIONS
6
WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Do not allow this appliance to be
used by, on or near children or
invalids.
2. Use this appliance only for its
intended use as described in the
manual. Do not use attachments
not recommended by the
manufacturer.
3. Never operate this appliance
if it has a damaged cord or
plug, if it is not working properly,
if it has been dropped or
damaged, or dropped into water.
Return the appliance to a service
center for examination and
repair.
4. Keep the cord away from heated
surfaces.
5. Never drop or insert any object
into any opening.
6. Do not use outdoors or operate
where aerosol (spray) products
are being used or where oxygen
is being administered.
7. Always attach plug to appliance
first, then to outlet. To disconnect, turn switch to «off»,
then remove plug from outlet.
8. Use only the Silk·épil
power supply provided with your
Silk·épil EverSoft.
7
In the following we would like to familiarise
you with the appliance and provide some
useful information about epilation. Please
read the use instructions carefully and
thoroughly before using the appliance.
Braun Silk·épil EverSoft has been designed to make the removal of unwanted
hair as efficient, gentle and easy as
possible. Its proven epilation system
removes your hair at the root, leaving your
skin smooth for weeks.
• The high-precision epilation head
with its unique arrangement of tweezers
and the integrated feed-in geometry
ensures an efficient epilation and
removes even hair as short as
0.5 mm at the root. As the hair that
re-grows is fine and soft, there will be no
more stubble.
• The EverSoft attachment makes the
epilation ultra gentle. With its pulsating
movement it stimulates and relaxes the
skin, thus masking the pulling sensation.
Important
• This appliance must never be used near
water (e.g. a filled wash basin, bathtub
or shower).
• Keep the appliance out of the reach of
children.
• When switched on, the appliance must
never come in contact with the hair on
your head, eyelashes, ribbons, etc. to
prevent any danger of injury as well as to
prevent blockage or damage to the
appliance.
• Before use, check whether your voltage
corresponds to the voltage printed on
the transformer. Always use the countryspecific 12 V transformer plug supplied
with the product (USA/CDN: type
PI-41-77 D-1, Mexico: PI-41-77 AR).
General information on epilation
Silk·épil is designed to remove hair on
legs, but it can also be used on all sensi-
8
2
tive areas like forearms, the underarm or
the bikini line.
All methods of hair removal at the root can
lead to in-growing hair and irritation (e.g.
itching, discomfort or reddening of the
skin), depending on the condition of the
skin and hair.
This is a normal reaction and should
quickly disappear, but may be stronger
when you are removing hair at the root for
the first few times or if you have sensitive
skin.
If, after 36 hours, the skin still shows
irritation, we recommend that you contact your physician.
In general, the skin reaction and the
sensation of pain tend to diminish
considerably with the repeated use of
Silk·épil.
In some cases inflammation of the skin
could occur when bacteria penetrate
the skin (e.g. when sliding the appliance
over the skin). Thorough cleaning of the
epilation head before each use will
minimise the risk of infection.
If you have any doubts about using this
appliance, please consult your physician.
In the following cases, this appliance
should only be used after prior consultation with a physician:
– eczema, wounds, inflamed skin
reactions such as folliculitis (purulent
hair follicles) and varicose veins
– around moles
– reduced immunity of the skin, e.g.
diabetes mellitus, during pregnancy,
Raynaud’s disease
– haemophilia or immune deficiency.
Some useful tips
Epilation is easier and more comfortable
when the hair is at the optimum length of
2–5 mm (0.08–0.2 in.) If hairs are longer,
we recommend to pre-cut to this length.
When epilating for the first time, it is
advisable to epilate in the evening, so that
any possible reddening can disappear
overnight. To relax the skin we recommend
applying a moisture cream after epilation.
Fine hair which re-grows might not grow
up to the skin surface. The regular use of
massage sponges (e.g. after showering)
or exfoliation peelings helps to prevent ingrowing hair as the gentle scrubbing
action removes the upper skin layer and
fine hair can get through to the skin
surface.
Description
EverSoft attachment
1
2
Epilation head
Release buttons
3
4
Switch
Socket for cord connector
5
6
Cord connector
12 V transformer plug
7
(see page 4)
Before starting off
• Your skin must be dry and free from
grease or cream.
• Before starting off, thoroughly clean the
epilation head
• Put on the epilation head and make sure that
the EverSoft attachment
• Plug the cord connector 6 into the
socket 5 and plug the transformer plug
into an electrical outlet.
7
2
.
1
is in place.
How to epilate
1 To turn on the appliance, slide switch
to setting «2»
4
(«2»= normal speed, «1» = reduced
speed).
2 Rub your skin to lift short hairs.
For optimal performance, hold the
appliance at a right angle (90°) against
your skin and guide it without pressure
against the hair growth, in the direction
of the switch. Both rolls of the EverSoft
attachment should always be kept in
contact with the skin, allowing the
pulsating movements to stimulate and
relax the skin for a gentler epilation.
3
Leg epilation
Epilate your legs from the lower leg in
an upward direction. When epilating
behind the knee, keep the leg stretched
out straight.
4
Underarm and bikini line epilation
Use tests monitored by dermatologists have revealed that you can also
epilate the underarm and the bikini line.
Please be aware that these areas are
particularly sensitive to pain. With
repeated usage the pain sensation will
diminish.
Before epilating, thoroughly clean the
respective area to remove residue (like
deodorant). Then carefully dab dry with
a towel. When epilating the underarm,
keep your arm raised up and guide the
appliance in different directions.
Cleaning the epilation head
5 After epilating, unplug the appliance
and clean the epilation head:
First take off the EverSoft attachment
1
and brush out the rolls.
6 Thoroughly clean the tweezer element
with the cleaning brush and also with
alcohol. While cleaning, you can turn
the tweezer element manually. To
remove the epilation head, press the
release buttons
and pull it off.
7 Give the top of the housing a quick
clean with the brush. Replace the
epilation head and the EverSoft
attachment.
Subject to change without notice
3
on the left and right
9
Loading...
+ 15 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.