Portable Printers
TLS 2200® PermaSleeve Wire Markers
tls2200
B-345 PermaSleeve® HT High Temperature
PVDF Wire Marking Sleeves
2:1 (3/32” is 3:1) heat shrinkable wire marking sleeve specifically designed for high
temperature and low vacuum outgassing applications. These heat shrinkable wire
marking sleeves are made from irradiated high temperature PVDF and have an
operating temperature of -55°C to +225°C (-67°F to +437°F). These heat shrinkable
wire marking sleeves meet the following industry specifications
• NASA SP-R-0022A Outgassing
Performance
• SAE-AS-81531
• MIL-STD-202
• RoHS Compliant
Tested per:
• SAE-AMS-DTL-23053/18, Class 2
• ASTM E162, ASTM E662
Performance Attributes:
TLS 2200 PermaSleeve
Sleeves
Part Number
PSHT-094-1-WT 100 26 to 20 0.031 (0.6) - 0.080 (2.0) 0.094 (2.4) 0.031 (0.8) 0.015 (0.4) ± 0.003 (0.07) 1.015 (25.8) R6010/R6610
PSHT-094-175-WT 100 26 to 20 0.031 (0.6) - 0.080 (2.0) 0.094 (2.4) 0.031 (0.8) 0.015 (0.4) ± 0.003 (0.07) 1.765 (44.8) R6010/R6610
PSHT-125-1-WT 100 20 to 16 0.063 (1.2) - 0.110 (2.8) 0.125 (3.2) 0.062 (1.6) 0.015 (0.4) ± 0.003 (0.07) 1.015 (25.8) R6010/R6610
PSHT-125-175-WT 100 20 to 16 0.063 (1.2) - 0.110 (2.8) 0.125 (3.2) 0.062 (1.6) 0.015 (0.4) ± 0.003 (0.07) 1.765 (44.8) R6010/R6610
PSHT-187-1-WT 100 16 to 10 0.094 (1.6) - 0.150 (3.8) 0.187 (4.7) 0.093 (2.4) 0.015 (0.4) ± 0.003 (0.07) 1.015 (25.8) R6010/R6610
PSHT-187-175-WT 100 16 to 10 0.094 (1.6) - 0.150 (3.8) 0.187 (4.7) 0.093 (2.4) 0.015 (0.4) ± 0.003 (0.07) 1.765 (44.8) R6010/R6610
PSHT-250-1-WT 100 12 to 8 0.125 (2.4) - 0.215 (5.5) 0.250 (6.4) 0.125 (3.2) 0.015 (0.4) ± 0.003 (0.07) 1.015 (25.8) R6010/R6610
PSHT-250-175-WT 100 12 to 8 0.125 (2.4) - 0.215 (5.5) 0.250 (6.4) 0.125 (3.2) 0.015 (0.4) ± 0.003 (0.07) 1.765 (44.8) R6010/R6610
PSHT-375-1-WT 100 8 to 4 0.187 (3.2) - 0.320 (8.1) 0.375 (9.5) 0.187 (4.7) 0.015 (0.4) ± 0.003 (0.07) 1.015 (25.8) R6010/R6610
PSHT-375-175-WT 100 8 to 4 0.187 (3.2) - 0.320 (8.1) 0.375 (9.5) 0.187 (4.7) 0.015 (0.4) ± 0.003 (0.07) 1.765 (44.8) R6010/R6610
PSHT-500-1-WT 100 6 to 1 0.250 (4.8) - 0.450 (11.4) 0.500 (12.7) 0.250 (6.4) 0.015 (0.4) ± 0.003 (0.07) 1.015 (25.8) R6010/R6610
PSHT-500-175-WT 100
PSHT-750-1-WT 100 2 to 4/0 0.375 (6.6) - 0.700 (17.8) 0.750 (19.0) 0.375 (9.5) 0.015 (0.4) ± 0.003 (0.07) 1.015 (25.8) R6010/R6610
PSHT-750-175-WT 100 2 to 4/0 0.375 (6.6) - 0.700 (17.8) 0.750 (19.0) 0.375 (9.5) 0.015 (0.4) ± 0.003 (0.07) 1.765 (44.8) R6010/R6610
PSHT-1000-1-WT 50 2/0 to 0.950 dia. 0.450 (11.4) - 0.950 (24.1) 1.000 (25.4) 0.500 (12.7) 0.017 (0.4) ± 0.004 (0.1) 1.015 (25.8) R6010/R6610
PSHT-1000-175-WT 50 2/0 to 0.950 dia. 0.450 (11.4) - 0.950 (24.1) 1.000 (25.4) 0.500 (12.7) 0.017 (0.4) ± 0.004 (0.1) 1.765 (44.8) R6010/R6610
Approx.
Per
Wire Gauge
Roll
6 to 1 0.250 (4.8) - 0.450 (11.4) 0.500 (12.7) 0.250 (6.4) 0.015 (0.4) ± 0.003 (0.07) 1.765 (44.8) R6010/R6610
Range of Wire Diameter
Inch (mm)
Min. Max.
Supplied
Diameter
Inch (mm)
Recovered
Diameter
Inch (mm)
Recovered Wall
Thickness
Inch (mm)
Sleeve Width
Inch (mm)
Rec.
Ribbon
*Choose Your PermaSleeve Color:
You may also choose to order your sleeves in the custom colors listed below. Simply replace “WT” with the abbreviation of the desired color.
Example: PSHT-187-175-WT becomes PSHT-187-175-YL
Available custom colors: WT=White YL=Yellow BK=Black BL=Blue PK=Pink
*Note: R6010 and R6610 are black ribbons for non-black surfaces. For black sleeves, R6810 and R4410-WT white ribbons should be used.
YL = Yellow BK = BlackWT = White BL = Blue
PK = Pink
52
Wire Marking Sleeve Heat Gun
Sleeve Heat Gun
Part Number: PMS-HG-1
The Brady Heat Gun provides fast, even shrinkage of
PermaSleeve wire marking sleeves. Deflector shield evenly
distributes forced air heat (minimum temperature 500°F (260°C)
around sleeves of up to ¾” diameter for uniform shrinkage.
Sturdy base with rubber pad allows hands-off operation.
Before heat shrink
After heat shrink
Approx. wire gauge based on AWG for THHN wire.
TLS2200 Printer Ribbons on page 57.
Full Material Properties on page 227.
Loading...