Brady THERMAL TRANSFER LABELS Label Index by Size
111
www.bradyid.com
Sleeves for Wire and Cable Marking by Size
THERMAL TRANSFER LABELS
THERMAL TRANSFER LABELS
SLEEVES FOR WIRE AND CABLE MARKING BY SIZE
White Polyolefin (B-342) One-Sided Printable PermaSleeve Markers
Marker Marker Vertical
Markers Range of Wire Dia. Approx. Width Height Repeat
Part Per Inch (mm) Wire Inch (mm) Inch (mm) Inch (mm) Recommended
Number Box Min. Max. Gauge** A B C Ribbon
1. 5 0 0 ⴖ Marker Width
PS-094-150-WT 2,500 0.023 (0.58)–0.080 (2.03) 28-18 1.500 (38.10) 0.182 (4.60) 0.500 (12.70)
R4300
PS-094-150-WT-S 500 0.023 (0.58)–0.080 (2.03) 28-18 1.500 (38.10) 0.182 (4.60) 0.500 (12.70)
R4300
PS-125-150-WT 2,500 0.046 (1.17)–0.110 (2.79) 22-16 1.500 (38.10) 0.235 (6.00) 0.500 (12.70)
R4300
PS-125-150-WT-S 500 0.046 (1.17)–0.110 (2.79) 22-16 1.500 (38.10) 0.235 (6.00) 0.500 (12.70)
R4300
PS-187-150-WT 2,500 0.062 (1.57)–0.150 (3.81) 18-12 1.500 (38.10) 0.335 (8.50) 0.625 (15.88)
R4300
PS-187-150-WT-S 500 0.062 (1.57)–0.150 (3.81) 18-12 1.500 (38.10) 0.335 (8.50) 0.625 (15.88)
R4300
PS-250-150-WT 2,500 0.094 (2.39)–0.215 (5.46) 16-10 1.500 (38.10) 0.439 (11.15) 0.750 (19.05)
R4300
PS-250-150-WT-S 500 0.094 (2.39)–0.215 (5.46) 16-10 1.500 (38.10) 0.439 (11.15) 0.750 (19.05)
R4300
PS-375-150-WT 1,000 0.125 (3.18)–0.320 (8.13) 12-6 1.500 (38.10) 0.645 (16.40) 1.000 (25.40)
R4300
PS-375-150-WT-S 250 0.125 (3.18)–0.320 (8.13) 12-6 1.500 (38.10) 0.645 (16.40) 1.000 (25.40)
R4300
PS-500-150-WT 500 0.187 (4.75)–0.450 (11.43) 8-1 1.500 (38.10) 0.851 (21.60) 1.250 (31.75)
R4300
PS-500-150-WT-S 250 0.187 (4.75)–0.450 (11.43) 8-1 1.500 (38.10) 0.851 (21.60) 1.250 (31.75)
R4300
2.000ⴖ Marker Width
PS-094-2-WT 2,500 0.023 (0.58)–0.080 (2.03) 28-18 2.000 (50.80) 0.182 (4.60) 0.500 (12.70)
R4300
PS-094-2-WT-S 500 0.023 (0.58)–0.080 (2.03) 28-18 2.000 (50.80) 0.182 (4.60) 0.500 (12.70)
R4300
PS-125-2-WT 2,500 0.046 (1.17)–0.110 (2.79) 22-16 2.000 (50.80) 0.235 (6.00) 0.500 (12.70)
R4300
PS-125-2-WT-S 500 0.046 (1.17)–0.110 (2.79) 22-16 2.000 (50.80) 0.235 (6.00) 0.500 (12.70)
R4300
PS-187-2-WT 2,500 0.062 (1.57)–0.150 (3.81) 18-12 2.000 (50.80) 0.335 (8.50) 0.625 (15.88)
R4300
PS-187-2-WT-S 500 0.062 (1.57)–0.150 (3.81) 18-12 2.000 (50.80) 0.335 (8.50) 0.625 (15.88)
R4300
PS-250-2-WT 2,500 0.094 (2.39)–0.215 (5.46) 16-10 2.000 (50.80) 0.439 (11.15) 0.750 (19.05)
R4300
PS-250-2-WT-S 500 0.094 (2.39)–0.215 (5.46) 16-10 2.000 (50.80) 0.439 (11.15) 0.750 (19.05)
R4300
PS-375-2-WT 1,000 0.125 (3.18)–0.320 (8.13) 12-6 2.000 (50.80) 0.645 (16.40) 1.000 (25.40)
R4300
PS-375-2-WT-S 250 0.125 (3.18)–0.320 (8.13) 12-6 2.000 (50.80) 0.645 (16.40) 1.000 (25.40)
R4300
PS-500-2-WT 500 0.187 (4.75)–0.450 (11.43) 8-1 2.000 (50.80) 0.851 (21.60) 1.250 (31.75)
R4300
PS-500-2-WT-S 250 0.187 (4.75)–0.450 (11.43) 8-1 2.000 (50.80) 0.851 (21.60) 1.250 (31.75)
R4300
2-to-1 Shrink Ratio White Polyolefin (B-341) One-Sided Printable PermaSleeve Markers
Marker Marker Vertical
Markers Range of Wire Dia. Approx. Width Height Repeat
Part Per Inch (mm) Wire Inch (mm) Inch (mm) Inch (mm) Recommended
Number Box Min. Max. Gauge** A B C Ribbon
2.000ⴖ Marker Width
PS-1000-2-WT 250 0.450 (11.43)–0.950 (24.13) 1-500 2.000 (50.80) 1.660 (42.16) 2.000 (50.80)
R4300
**Based on National Electric Code insulation measurement of THHN wire.
Sleeves may be perforated at factory for shorter marker lengths. Depending on overall length, sleeves may be perforated in halves, thirds or fourths.
Contact your Brady Identification Solutions Distributor or Customer Service Representative for ordering information.
Brady PermaSleeve full-circle insulating wire markers meet the rigid insulating, material requirements and physical properties of
MIL-DTL-23053/5 Class 1, MIL-M-81531, MIL-STD-202F, METHOD 215, and UL224.The heat-shrinkable irradiated polyolefin does not
smudge or fade when printed. The unique flattened full-circle design provides fast, permanent wire marking. PermaSleeve markers may be
printed on Brady’s thermal transfer printers.
PermaSleeve markers fit snugly
around wires for maximum
insulation protection and permanent identification.
䊳
3-
TO-1 SHRINK RATIO ONE-SIDED PRINTABLE PERMASLEEVE
™
WIRE MARKERS
112
www.bradyid.com
Sleeves for Wire and Cable Marking by Size
SLEEVES FOR WIRE AND CABLE MARKING BY SIZE
THERMAL TRANSFER LABELS
THERMAL TRANSFER LABELS
White Polyolefin (B-342) Two-Sided Printable PermaSleeve Markers
Marker Marker Vertical
Markers Range of Wire Dia. Approx. Width Height Repeat
Part Per Inch (mm) Wire Inch (mm) Inch (mm) Inch (mm) Recommended
Number Box Min. Max. Gauge** A B C Ribbon
2.000ⴖ Marker Width
3PS-094-2-WT 2,500 0.023 (0.58)–0.080 (2.03) 28-18 2.000 (50.80) 0.182 (4.60) 0.500 (12.70) R4300
3PS-094-2-WT-S 500 0.023 (0.58)–0.080 (2.03) 28-18 2.000 (50.80) 0.182 (4.60) 0.500 (12.70) R4300
3PS-125-2-WT 2,500 0.046 (1.17)–0.110 (2.79) 22-16 2.000 (50.80) 0.235 (6.00) 0.500 (12.70) R4300
3PS-125-2-WT-S 500 0.046 (1.17)–0.110 (2.79) 22-16 2.000 (50.80) 0.235 (6.00) 0.500 (12.70) R4300
3PS-187-2-WT 2,500 0.062 (1.57)–0.150 (3.81) 18-12 2.000 (50.80) 0.335 (8.50) 0.625 (16.00) R4300
3PS-187-2-WT-S 500 0.062 (1.57)–0.150 (3.81) 18-12 2.000 (50.80) 0.335 (8.50) 0.625 (16.00) R4300
3PS-250-2-WT 2,500 0.094 (2.39)–0.215 (5.46) 16-10 2.000 (50.80) 0.439 (11.15) 0.750 (19.05) R4300
3PS-250-2-WT-S 500 0.094 (2.39)–0.215 (5.46) 16-10 2.000 (50.80) 0.439 (11.15) 0.750 (19.05) R4300
3PS-375-2-WT 1,000 0.125 (3.18)–0.320 (8.13) 12-6 2.000 (50.80) 0.645 (16.40) 1.000 (25.40) R4300
3PS-375-2-WT-S 250 0.125 (3.18)–0.320 (8.13) 12-6 2.000 (50.80) 0.645 (16.40) 1.000 (25.40) R4300
3PS-500-2-WT 500 0.187 (4.75) –0.450 (11.43) 8-1 2.000 (50.80) 0.851 (21.60) 1.250 (31.75) R4300
3PS-500-2-WT-S 250 0.187 (4.75)–0.450 (11.43) 8-1 2.000 (50.80) 0.851 (21.60) 1.250 (31.75) R4300
**Based on National Electric Code insulation measurement of THHN wire.
Sleeves may be perforated at factory for shorter marker lengths. Depending on overall length, sleeves may be perforated in halves, thirds or fourths.
Contact your Brady Identification Solutions Distributor or Customer Service Representative for ordering information.
Brady's PermaSleeve markers provide a
complete wire marking solution that
combines speed, ease of use, and
permanence to create long-lasting, high
quality identification.
PermaSleeve full-circle markers are available in a
3-to-1 shrink ratio to cover a wider range of wire
diameters per sleeve size.
䊳
3-
TO-1 SHRINK RATIO TWO-SIDED PRINTABLE PERMASLEEVE
™
MARKERS
Loading...