Bradley Smoker 594 User Manual

Model 594 — Partition-Mounted

Serves Two Compartments

Dual Roll Tissue Dispenser/Waste Receptacle

Product Materials

CABINET: 22 gauge stainless steel with exposed surfaces in architectural

satin finish. Welded construction with burr-free edges.
FLANGE: 22 gauge stainless steel with exposed surfaces in architectural

satin finish. One-piece seamless construction, 1" wide with ¼" return.
DOOR: 18 gauge stainless steel with full-length piano hinge and tumbler

lock keyed like other Bradley units.
PUSH FLAP DOOR: 22 gauge stainless steel with exposed surfaces in

architectural satin finish. Self-closing, with heavy-duty stainless steel piano
hinge.

WASTE RECEPTACLE: leakproof molded plastic. 1.0 gal. capacity.
SPINDLE: polyethylene, non-removable by user.

Capacity

Toilet Tissue Dispensers-Four standard core toilet tissue rolls through 5¼"
in diameter. Box of 500 waxed paper liners are available by ordering part
number P11-022.

594

Combination Unit

Hinged Side

Operation

Hinged access door permits servicing of components from one side.

Installation

Verify all rough-in dimensions prior to installation. Requires partition
opening 15
in partition spec i fi ca tions. Flanges adjustable for partitions from
thick. Remove one flange and install cabinet in partition opening flush against
partition. Position flanges on both sides of cabinet and secure with mounting
screws (included) at holes provided.

3

⁄8"W x 18¼"H. Location of hole and dimensions should be noted

3

⁄8" to 2¾"

Guide Specification

Partition-mounted combination unit shall include toilet tissue dispenser and
napkin disposal, and be fabricated of stainless steel with seamless exposed
surfaces in satin finish. Door and back panel shall be 18 gauge. Door shall
have piano hinge and tumbler lock.

Overall dimensions: 17

Washroom Accessories

Document No. 8620

1

⁄8"W x 20"H x 4½"D.

5900 Series Combination Units are to be installed so that
doors open 90° to fill product maintain waste container.

ADA Compliant

Consult local and national accessibility codes for proper
installation guidelines.

Conformity and compliance to local and national codes is
the responsibility of the installer.

Page 1 of 2

This information is subject to change without notice. 5/3/2012

P.O. Box 309, Menomonee Falls, WI 53052-0309

© 2012 Bradley

Phone: 800.BRADLEY (800.272.3539) Fax: [phone]

bradleycorp.com

594

Combination Unit

Dimensions

1" (25mm)

Ty p.

6"

(152mm)

20"

(508mm)

9"

(229mm)

5"

(127mm)

½"

(13mm)

Push Flap

Door

Removable

Waste

Receptacle

16¹⁄₈"

(410mm)

15¹⁄₈"

(384mm)

17¹⁄₈"

(435mm)

Mounting

Holes

Toilet Tissue

Spindle (qty. 4)

7¹⁵⁄₁₆"

(202mm)

4¼"

(108mm)

Dim. "A"

to finished

floor

Adjustable Flange

4½"

(114mm)

³⁄₈" to 2¾"

(10mm to 70mm)

Partition Thickness

1½"

(38mm)

18"

(457mm)

Fixed

Flange

1¼"

(32mm)

Grab bars must be ordered separately. To learn more about Bradley's
wide variety of grab bar configurations, visit bradleycorp.com.

For Dim. "A" Top of Rough Wall

Dim. "A" Key Surface:

Top of 1½" grab bar (installed with
1½" clearance) to finished floor

Rough wall opening:

Partition-Mount:

Washroom Accessories

Document No. 8620

Page 2 of 2

This information is subject to change without notice. 5/3/2012

Not Applicable 37" (940mm) 18¾" (476mm) 19" (483mm)

36" (914mm) 33" (838mm) 14¾" (375mm) 15" (381mm)

15³⁄₈" (391mm) Wide x 18¼" (464mm) High x Partition Thickness

Opening

Bottom of Rough Wall

Opening

Phone: 800.BRADLEY (800.272.3539) Fax: [phone]

For Bottom Toilet Paper

Opening Lower Lip @ Dim. "A"

© 2012 Bradley

P.O. Box 309, Menomonee Falls, WI 53052-0309

bradleycorp.com