Bradley Smoker 594 User Manual
MODEL 594
WASHROOM ACCESSORIES
TECHNICAL DATA
P.O. Box 309, Menomonee Falls, WI 53052-0309
Phone 1-800-BRADLEY FAX 262-253-4161
Web Site: http://www.bradleycorp.com
This information is subject to change without formal notice.
© 2007 Bradley Corporation
4-5-2007
Document No. 8620
COMBINATION UNIT
●
Partition-Mounted
●
Serves Two Compartments
●
Dual Roll Tissue Dispenser
●
Napkin Disposal
CONSTRUCTION:
●
FLANGE fabricated of type 304 (18-8) 22 gauge stainless steel with exposed
surfaces in architectural satin finish. Flange of one piece seamless construction
1" wide with 1/4" return.
●
CABINET fabricated of type 304 (18-8) 22 gauge stainless steel with exposed
surfaces in architectural satin finish. Welded construction with burr-free edges.
●
DOOR fabricated of type 304 (18-8) 18 gauge stainless steel with full length piano
hinge and tumbler lock keyed like other Bradley units.
●
PUSH FLAP DOOR fabricated of type 304 (18-8) 22 gauge stainless steel with
exposed surfaces in architectural satin finish. Self-closing, with heavy duty stainless
steel piano hinge.
●
WASTE CONTAINER fabricated of leakproof molded plastic. 1.0 gal. capacity.
●
SPINDLES of polyethylene, non-removable by user.
CAPACITY:
Toilet Tissue Dispensers-Four standard core toilet tissue rolls through 5-1/4" in diameter.
OPERATION:
Hinged access door permits servicing of components from one side.
INSTALLATION:
Requires partition opening 15-3/8"W x 18-1/4"H. Top of partition opening 4’0" above
finished floor. For Barrier-free applications, top of partition opening 2’8" above finished
floor. (Location of hole and dimensions should be noted in partition specifications.)
Flanges adjustable for partitions from 3/8" to 2-3/4" thick. Remove one flange and
install cabinet in partition opening flush against partition. Position flanges on both sides
of cabinet and secure with mounting screws (included) at holes provided.
GUIDE SPECIFICATION:
Partition-mounted combination unit shall include toilet tissue dispenser and napkin
disposal, and be fabricated of type 304 (18-8) heavy gauge stainless steel with
seamless exposed surfaces in satin finish. Door and back panel shall be 18 gauge. Door
shall have piano hinge and tumbler lock.
Overall dimensions: 17-1/8"W x 20"H x 4-1/2"D.
Partition-Mounted Combination Unit shall be Bradley Model 594.
This unit meets “Barrier Free”
requirements when mounted in
accordance with local ordinances.
20"
(778 mm)
1/2"
(13 mm)
6"
(152 mm)
9"
(229 mm)
5"
(127 mm)
17-1/8"
(435 mm)
16-1/8"
(410 mm)
Napkin
Disposal
Removable
Waste
Container
(384 mm)
15-1/8"
Mounting
Holes
Toilet Tissue
Spindle (4)
7-15/16""
(202 mm)
1" (25 mm)
Adjustable
Flange
Typ .
3/8" to 2-3/4"
Partition Thickness
(10 mm to 70 mm)
(114 mm)
(32 mm)
18"
(457 mm)
Fixed
Flange
4-1/2"
1-1/4"
Loading...