Bradley Corporation S19-120BF, S19-120ABF, S19-120SSBF User Manual
S19-120BF, S19-120ABF, S19-120SSBF
Barrier-Free Drench Shower w/Horizontal Supply
• Exceeds American National Standard Z358.1 Specifications
• Exceeds European EN 15154-1
• Exceeds Australia/New Zealand AS4775 & AS/NZS 4020
• Easily Mounts to Wall
• Galvanized Steel Protected with BradTect
• Universal Identification Sign and Inspection Tag Included
• Full, One-Year Warranty
• SpinTec
• Classified by Underwriters Laboratory Inc. to ANSI Z358.1
• Listed by Intertek to EN 15154-1
• Certified by IAPMO OCEANA to AS4775 and AS/NZS 4020
™
showerheads are covered by one or more of the following patents: 8113446; D594,089;
D669,555; Reg. Comm. Des. D001079560-0001. Other patents pending.
Specifications
Barrier-Free design makes this drench shower unit fully accessible to people with physical disabilities.
Bradley meets accessibility codes by ensuring proper placement of shower heads and extended pull
rods. Unit saves space and fits easily into any work environment. Shower valve operates quickly by an
extended pull rod with a triangular handle.
Drench shower is designed to accommodate standard 8' ceiling height. ANSI Z358.1
compliant drench showers are mounted between 82"–96" from the lower edge of the
showerhead or shroud to the floor.
This plumbing fixture is not intended to dispense water for human consumption
through drinking or for preparation of food or beverages.
®
Safety Yellow Coating
®
Model S19-120BF
Model S19-120ABF
Model Description
S19-120BF Barrier-Free Drench Shower w/Horizontal Supply, Plastic Showerhead
S19-120ABF Barrier-Free Drench Shower w/Horizontal Supply, Plastic Showerhead with Stainless
Steel Shroud
S19-120SSBF Barrier-Free Drench Shower w/Horizontal Supply, All-Stainless Steel Fixture
S19-120SSBFZ Barrier-Free Drench Shower w/Horizontal Supply, All-Stainless Steel Fixture with
BSPP Connections/Certified to AS4775 & AS4020
S19-2100 Navigator EFX25 - Emergency Thermostatic Mixing Valve
Recommended Option:
Navigator S19-2100 EFX25
Emergency Thermostatic Mixing Valve
Satisfies ANSI Z358.1
tepid water requirements.
Model S19-120SSBF
Page 1 of 3 11/2/2015
This information is subject to change without notice.
Bradley_DrenchShower_S19-120BF_ABF_SSBF
P.O. Box 309, Menomonee Falls, WI 53052-0309
© 2015 Bradley
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
S19-120BF, S19-120ABF, S19-120SSBF
Barrier-Free Drench Shower w/Horizontal Supply
Standard Equipment
SpinTec™ Showerhead
Standard showerhead is 3.1" (78.7mm) diameter highly visible yellow impact-resistant
plastic (Model S19-120ABF includes a 10¾" [273mm] diameter corrosion-resistant
stainless steel shroud). High performance corrosion-resistant stainless steel
showerhead measures 1½" (38mm) in diameter (Model S19-120SSBF only). SpinTec
drench showerhead features integral 22 GPM (83.3 L) flow control, conserving water
and helping to accurately size your tepid water system.
SpinTec Flow Rate vs Inlet Pressure at Fixture
40
35
30
25
20
15
Flow Rate (gpm)
10
5
0
10 20 30 40 50 60 70 80 90
Valve
Chrome-plated brass 1" NPT stay-open ball valve, operated by stainless steel pull rod
with triangular handle. Model S19-120SSBF is all stainless steel.
Pipe and Fittings
Galvanized steel with BradTect® safety yellow coating. S19-120SSBF is all stainless
steel.
Water Supply
1" NPT Horizontal.
Inlet p ressure at Fixt ure (psig)
S19-120BF
(114mm)
84"
(2134mm)
to Floor
4½"
Ø 3.1"
(78.7mm)
9"
(229mm)
24"
(610mm)
45"
(1142mm)
8"
(203mm)
5
⁄8"
3
(92mm)
Page 2 of 3 11/2/2015
This information is subject to change without notice.
Bradley_DrenchShower_S19-120BF_ABF_SSBF
All dimensions assume standard thread engagement. Variations
in manufacturing allow for +/To find the tolerance of a dimension, add the number of thread
joints in between a dimension and multiply it by
1
⁄8" (3mm) per threaded joint.
1
⁄8" (3mm).
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
© 2015 Bradley
bradleycorp.com
Loading...