Bradley Corporation 9953, 9954, 9955 Installation Manual

9953, 9954, 9955
Mop and Broom Holder
Model 9953 – 3 Holders Bradex Model 9954 – 4 Holders Bradex
®
®
Model 9955 – 5 Holders
Product Materials
BACKPLATE: 22 gauge stainless steel with exposed surfaces in architectural
satin finish. HOLDERS: spring-activated rubber cams on plated steel retainers. Will hold
a mop or broom handle with a diameter between 5/8" and 1".
Operation
Weight of mop or broom holds handle in place.
Installation
Verify all rough-in dimensions prior to installation. Secure to wall with mounting screws (not included) at holes provided.
Guide Specification
Surface mounted mop and broom holder shall be fabricated of 22 gauge stainless steel in satin finish with spring-activated rubber cam holders.
“A”
“B”
4"
(102 mm)
(406 mm)
2-3/4"
(70 mm)
16"
1-1/2" (38 mm)
4"
(102 mm)
(102 mm)
Dimensions
Model No. Dim. “A” Dim. “B” Hooks
9953 24" (610 mm) 9-1/8" (232 mm) 3
9954 36" (914 mm) 9-3/4" (248 mm) 4
9955 48" (1219 mm) 10" (254 mm) 5
1" (25 mm)
15/16" (24 mm)
4"
Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.
Page 1 of 1 10/6/2011 This information is subject to change without notice. Bradley_MopBroomHolder_9953_54_55
P.O. Box 309, Menomonee Falls, WI 53052-0309
© 2015 Bradley
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
Loading...