Bradford White SW-2-50R-L, SW-2-30-L, SW-2-40R-L User Manual
Residential PowerStor Series
®
Single-Wall Indirect Water Heater
The PowerStor Series®Single-Wall Models feature:
■ Heat Exchanger—Single-Wall 1
1
⁄2" O.D. glass coated (Vitraglas®) carbon
steel coil. The coil has a heat transfer area of 14.2 sq. ft. and a stored water
volume of 2.7 Gal. Maximum supply temperature from the boiler must not
exceed 240° F.
■ Factory Installed Hydrojet
®
Total Performance System—Cold water inlet
sediment reducing device helps prevent sediment build up in tank.
Increases first hour delivery of hot water while minimizing temperature build
up in tank.
■ Vitraglas
®
Lining—Bradford White tanks are lined with an exclusively
engineered enamel formula that provides superior tank protection from the
highly corrosive effects of hot water. This formula (Vitraglas
®
) is fused to the
steel surface by firing at a temperature of over 1600°F (871°C).
■ Immersed Adjustable Honeywell Aquastat—Fast acting immersion
aquastat for automatic temperature control (adjustable from 80°F to 160°F).
■ Supply and Return Connections—1" NPT female connections are located
on the front for both the boiler collector supply and return.
■ 2" Non-CFC Foam Insulation—Covers the side and top of tank, reducing
the amount of heat loss. This results in less energy consumption, improved
operation efficiencies and jacket rigidity.
■ Potable Water Connections—3⁄4" NPT (1" NPT for 120 gallon model)
factory installed true dielectric fittings extend water heater life and eases
installation.
■ Three Protective Aluminum Anode Rods—Provide added protection
against corrosion for long trouble-free service.
■ Steel Tank—Heavy gauge steel automatically formed, rolled and welded to
assure a continuous seam for glass lining.
■ T&P Relief Valve—Included.
■ Low Restriction Brass Drain Valve.
■ AHRI Certified—These water heaters are rated by the Air-Conditioning,
Heating, and Refrigeration Institute to provide accurate performance data
within the standards of the certification. This certification provides a
recognized standard for proper comparison of hydronic appliances.
Limited Lifetime Tank and Heat Exchanger Warranties / 6-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete copy of
the warranty included with the heater.
Photo is of
SW-2-65-L
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171;
(B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534;
7,270,087 B2. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.
Vitraglas
®
and Hydrojet®are registered trademarks of Bradford White®Corporation.
554-B-0913-A
Single Wall Models
Meet or exceed ASHRAE 90.1b (current standard)
Model
Number
Approx.
Shipping
Weight
lbs.
A
Floor to
Heater
Top
in.
C
Floor to
T&P
Conn.
in.
B
Jacket
Dia.
in.
Capacity
SW-2-30-L
SW-2-40R-L
SW-2-50R-L
SW-2-65-L
SW-2-80-L
SW-2-120-L
U.S.
Gal.
30
38
48
60
75
116
Imp.
Gal.
25
32
40
50
62
97
33
5
/
8
411/
8
461/
4
591/
4
59
62
1
/
2
281/
4
343/
8
401/
8
531/
8
527/
8
553/
4
164
185
195
225
250
370
22
22
22
22
24
28
1
/
4
E
Floor to
Exchanger
Outlet
in.
53/
8
53/
8
53/
8
53/
8
53/
8
63/
8
271/
2
271/
2
271/
2
271/
2
271/
2
281/
2
343/
8
417/
8
47
60
59
3
/
4
631/
4
D
Floor to
Water
Conn.
in.
Model
Number
Approx.
Shipping
Weight
kg.
A
Floor to
Heater
Top
mm.
C
Floor to
T&P
Conn.
mm.
B
Jacket
Dia.
mm.
Capacity
SW-2-30-L
SW-2-40R-L
SW-2-50R-L
SW-2-65-L
SW-2-80-L
SW-2-120-L
Liters
114
143
182
227
284
439
854
1045
1175
1505
1499
1588
718
873
1019
1349
1343
1416
74
85
89
102
114
167
559
559
559
559
610
718
E
Floor to
Exchanger
Outlet
mm.
137
137
137
137
137
162
F
Floor to
Exchanger
Inlet
in.
F
Floor to
Exchanger
Inlet
mm.
699
699
699
699
699
720
11
1
/
2
111/
2
111/
2
111/
2
111/
2
111/
2
G
Floor to
Aquastat
in.
G
Floor to
Aquastat
mm.
292
292
292
292
292
292
873
1064
1194
1524
1518
1607
D
Floor to
Water
Conn.
mm.
Residential PowerStor Single-Wall Indirect Water Heater
General: All units are certified at 300 PSI (2068 kPa) test pressure
and 150 PSI (1034 kPa) working pressure. Potable water connections are 3/4" (19mm) NPT on 8" (203mm) centers. The 120 gallon model has 1" (25 mm)
NPT potable water connections on 8" (203 mm) centers.
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
Suitable for Water (Potable) Heating and Space Heating.
Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into the potable side of this system. The potable side may NEVER be
connected to any existing heating system or component(s) previously used with a non-potable water heating appliance. The heat exchanger side of the unit
may be used in space heating applications.
Based on 200°F boiler water temperature and 50°F
potable water inlet.
Printed in U.S.A.
554-B-0913-A
©2013, Bradford White Corporation. All rights reserved.
Ambler, PA
For U.S. and Canada field service, contact your professional installer or local Bradford White sales representative.
Sales 800-523-2931 ●Fax 215-641-1670 / Technical Support 800-334-3393 ●Fax 269-795-1089 ●Warranty 800-531-2111 ●Fax 269-795-1089
International: Telephone 215-641-9400
●
Telefax 215-641-9750 / www.bradfordwhite.com
Sales / Technical Support 866-690-0961 / 905-238-0100 ●Fax 905-238-0105 / www.bradfordwhite.com
Model
Number
140°F 115°F
DOE Water Heater Performance
SW-2-30-L
SW-2-40R-L
SW-2-50R-L
SW-2-65-L
SW-2-80-L
SW-2-120-L
Maximum First
Hour Rating
(Gal.) @
279
288
297
306
321
357
429
438
447
456
470
507
140°F 115°F
4.2
4.2
4.2
4.2
4.2
4.2
6.7
6.7
6.7
6.7
6.7
6.7
Continuous
Draw Rating
(Gal./Min.) @
Approximate
Boiler Output
Needed for
Ratings (BTU/Hr.)
220,000
220,000
220,000
220,000
220,000
220,000
Model
Number
AHRI Certified Water Heater Ratings
SW-2-30-L
SW-2-40R-L
SW-2-50R-L
SW-2-65-L
SW-2-80-L
SW-2-120-L
First Hour
Delivery
@ 135°F
(Gal.)
255
260
265
275
295
325
Continuous
Draw Rating
@ 135°F
(Gal./Hr.)
235
235
235
235
235
235
Standby
Heat Loss
Rating
(°F/Hr.)
1.2
1.1
0.9
0.7
0.6
0.4
Minimum
Heat Source
Flow Rate
(Gal./Min.)
13.7
13.7
13.7
13.7
13.7
13.7
Minimum
Output Rate
of Heat Source
(BTU/Hr.)
157,000
157,000
157,000
157,000
157,000
157,000
D
A
F
E
G
C
B
D
A
F
E
G
C
B
POTABLE
CONNECTIONS
ANODE RODS
(TYPICAL)
(TYPICAL)
These certified ratings were obtained with a heat source output
rate and flow rate as specified and a 180°F boiler water supply
temperature. Other results will be obtained under different
conditions.
Heat Exchanger Head Loss
GPM
2
0.0150.0980.22100.80120.50
Ft. of Hd. Loss
Loading...