Bradford-White S-SW2-60R6DS User Manual
Solar Saver®Series Single Wall
Energy Saver Water Heater
Photo is of
S-SW2-60R6DS
The Solar Saver®Series Single Wall Models feature:
eat Exchanger—Single Wall 1
■ H
he coil has a heat transfer area of 14.2 sq. ft. and a stored water volume of
T
.5 gal. Maximum supply temperature from the solar collector must not
2
1
O.D. glass coated (Vitraglas
⁄2"
®
steel coil.
)
exceed 250°F.
■ Sensor Wires for Solar Thermistor Connections—Twisted wires are
provided under the Upper and Lower covers. These wires have been
provided as a means for connecting thermistors to a solar controller
(Thermistors and Solar Controller are not provided).
■ Optimizer™Temperature Control System—Integrated mixing device
features a thermostatically controlled mixing device that is pre-piped with a
flexible connector. This required system is easily installed and ensures a
comfortable outlet temperature while providing a steady flow of hot water.
■ Double Element Backup—Allows entire storage tank to hold hot water
during periods where solar heating is not available.
■ Factory Installed Hydrojet®Total Performance System—Cold water inlet
sediment reducing device helps prevent sediment build up in tank.
Increases first hour delivery of hot water while minimizing temperature build
up in tank.
■ Vitraglas®Lining—Bradford White water heater tanks are protected from
the corrosive effects of hot water by an exclusive ceramic porcelain-like
coating. The Bradford White high silica Vitraglas
®
lining provides a tough
interior surface for our hot water tanks.
■ Fully Automatic Controls—Fast acting surface-mount thermostats for
automatic temperature control. Factory installed sensitive manual reset
energy cutoff for safety to prevent overheating.
■ Supply and Return Connections—1" NPT female connections are located
on the front for both the solar collector supply and return.
■ 2" Non-CFC Foam Insulation—Covers the sides and top of tank, reducing
the amount of heat loss. This results in less energy consumption, improved
operation efficiencies and jacket rigidity.
■ Potable Water Connections—3⁄4" NPT factory installed true dielectric
fittings extend water heater life and eases installation.
wo Protective Aluminum Anode Rods—Provide added protection
■ T
against corrosion for long trouble-free service.
■ Direct Heat Transfer With Immersed Incoloy Elements—Transfers heat
directly and efficiently to the water. Screw-in style.
■ Steel Tank—Heavy gauge steel automatically formed, rolled and welded to
e a continuous seam for glass lining.
assur
■ T&P Relief Valve—Included.
■ Brass Drain V
alve
.
ear Limited Tank Warranties / 6-Year Limited Warranty on Component Parts.
6-Y
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the war
ACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS:
MANUF
5,277,171; (B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919;
Re. 34,534. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105.
Solar Saver®, V
itraglas
®
and Hydr
ojet
®
egister
e r
ar
ed trademarks of Bradfor
ranty included with the heater
7,063,133 B2; 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879;
®
d White
Corporation.
.
501-B-0408-A
Solar Energy Saver Models
Meet or exceed ASHRAE 90.1b (current standard)
Model
N
umber
A
pprox.
Shipping
W
eight
l
bs.
A
Floor to
H
eater
T
op
i
n.
C
Floor to
W
ater
C
onn.
i
n.
B
Jacket
D
ia.
i
n.
C
apacity Recovery at
90°F Rise*
S-SW2-60R6DS
S
-SW2-75R6DS
S
-SW2-115R6DS
U
.S.
Gal.
60
7
5
1
15
I
mp.
Gal.
50
6
2
9
6
U
.S.
GPH
20
2
0
2
0
I
mp.
GPH
18
1
8
1
8
59
1
/4
5
9
1
/4
6
2
3
/4
621/4
6
2
1
/4
6
4
1
/2
210
2
36
3
40
22
2
4
2
8
1
/4
E
Floor to
S
olar
C
ollector
Supply
i
n.
29
1
/2
2
9
1
/2
2
9
1
/2
73/8
73/8
73/8
53
5
3
5
5
3
/4
D
Floor to
T
&P
C
onn.
i
n.
M
odel
N
umber
Approx.
S
hipping
W
eight
k
g.
A
F
loor to
H
eater
Top
m
m.
C
F
loor to
W
ater
Conn.
m
m.
B
J
acket
D
ia.
m
m.
Capacity Recovery at
5
0°C Rise*
S-SW2-60R6DS
S-SW2-75R6DS
S-SW2-115R6DS
Liters
227
283
435
L
iters/
Hour
76
76
76
1504
1504
1593
1560
1560
1601
95
107
154
559
609
717
E
F
loor to
S
olar
Collector
S
upply
m
m.
749
749
749
F
Floor to
S
olar
C
ollector
Return
i
n.
F
F
loor to
S
olar
Collector
R
eturn
m
m.
187
187
187
1346
1346
1416
D
F
loor to
T
&P
Conn.
m
m.
Solar Saver®Series Water Heater
C
D
F
E
A
B
Solar Sensor Wiring
Junction Box
Optional Outlet
for Recirculation
(S-SW2-60R & S-SW2-75R)
S
olar Thermistor Wires
Upper Heating Element
with Thermostat
Thermostat
(controls lower element)
Solar Thermistor Wires
Lower Heating Element
M
odel
Number
Electric Backup Water Heater Ratings
First Hour
S
upply
(Gal.)
Standby Heat
L
oss Rating
(°F/Hr.)
S
-SW2-60R6DS
S
-SW2-75R6DS
S
-SW2-115R6DS
8
4
9
7
1
33
1
.1
0
.9
0
.7
Heat Exchanger Pressure Drop Curve
Flow Rate (GPM)
Pressure Drop (PSID)
Head Loss (ft. w.c.)
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
01234 5678910
*Based on 4500W/4500W, Non-Simultaneous operation.
Optional 5500W/5500W, Non-Simultaneous operation.
General
All electric water heaters are certified at 300 PSI test pressure (2068 kPa) and 150 PSI working pressure (1034 kPa). All potable water and electrical
connections are 3⁄4" NPT (19mm) on 8" (203mm) centers. All models UL listed.
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
Suitable for W
Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into the potable side of this system. The potable side may NEVER be
connected to any existing heating system or component(s) previously used with a non-potable water heating appliance.
ater (Potable) Heating and Space Heating.
Sales 800-523-2931 ●Fax 215-641-1670 / T
501-B-0408-A
For U.S. and Canada field ser
International:
Telephone 215-641-9400 ●Telefax 215-641-9750 / www.bradfordwhite.com
Sales / T
vice, contact your pr
echnical Suppor
echnical Suppor
©2008, Bradford White Corporation. All rights reserved.
, PA
Ambler
ofessional installer or local Bradfor
t
800-334-3393 ●Fax 269-795-1089 ●W
t
866-690-0961 / 905-238-0100 ●Fax 905-238-0105 / www
d White sales r
ranty
ar
epresentative.
800-531-2111 ●Fax 269-795-1089
.bradfor
dwhite.com
Printed in U.S.A.
Loading...