Bradford White RG250T6N Specifications
Residential Atmospheric Vent
Gas Water Heater
Photo is of
RG240T6N
FEATURING:
The Atmospheric Vent FVIR Defender Safety System® Models Feature:
■ Bradford White ICON System
™
*—Intelligent gas control with proven millivolt
powered technology and built-in piezo igniter. A standard, off the shelf
thermopile converts heat energy from the pilot flame into electrical energy to
operate the gas valve and microprocessor. No need for external electricity.
-- Enhanced Performance—Proprietary algorithms provide enhanced First
Hour Delivery ratings and tighter temperature differentials.
-- Advanced Temperature Control System—Microprocessor constantly
monitors and controls burner operation to maintain consistent and accurate
water temperature levels.
-- Intelligent Diagnostics—An exclusive green LED light prompts the installer
during start-up and provides ten different diagnostic codes to assist in
troubleshooting.
-- Pilot On Indication—Flashing green LED provides positive indication that
pilot is on.
-- Separate Immersed Thermowell—High-strength advanced polymer
composite thermowell provides isolation between electric temperature sensor
and surrounding water. No need to drain the tank when removing gas valve.
■ Advanced ScreenLok
®
Technology Flame Arrestor Design—Flame arrestor
is designed to prevent ignition of flammable vapor outside of the water heater.
■ Resettable Thermal Switch—Proven and reliable bimetallic switch prevents
burner and pilot operation in case of ongoing flammable vapor burn inside of the
combustion chamber or restricted air flow.
■ Maintenance-Free—No regular cleaning of air inlet openings or flame arrestor
is required under normal conditions.
■ Sight Window—Offers a view into the combustion chamber to observe the
operation of the pilot and burner.
■ Factory-Installed Hydrojet
®
Total Performance System—Sediment reducing
device that also increases first hour delivery of hot water while minimizing
temperature build-up in tank.
■ Vitraglas
superior tank protection from the highly corrosive effects of hot water. This
formula (Vitraglas
®
Lining—An exclusively engineered enamel formula that provides
®
) is fused to the steel surface by firing at a temperature of over
1600°F (871°C).
■ Insulation System—Non-CFC foam covers the sides and top of the tank,
reducing heat loss. This results in less energy consumption, improved
efficiencies, and jacket rigidity.
■ Pedestal Base.
■ Water Connections—3⁄4" NPT factory installed true dielectric fittings.
■ Factory-Installed Heat Traps.
■ Protective Magnesium Anode Rod.
■ 3x4 “Snap Lock” Draft Diverter—Allows either 3" or 4" vent connections with
inputs of 40,000 BTU/Hr. or less. Over 40,000 BTU/Hr. has the 4" “Snap Lock”
Draft Diverter.
■ T&P Relief Valve—Installed.
■ Low Restrictive Brass Drain Valve—Durable tamper proof design.
■ NOx Emissions – Less than 40 ng/J.
*May vary by region
6 or 10-Year Limited Tank Warranties / 6 or 10- Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526;
6,684,821; 6,442,178; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984;
8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS:
2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. Defender Safety System
trademarks of Bradford White
®
Corporation.
®
, ScreenLok®, Vitraglas® and Hydrojet® are registered
1101-B-0417
Residential Atmospheric Vent Gas Water Heater
B
8"
Optional Top T&P Valve
H
Atmospheric Vent Models
NATURAL GAS AND LIQUID PROPANE GAS
Model
Number
RG130T6N
RG230T6N●
RG230S6N
RG140T6N
RG240T6N
RG240S6N
RG150T6N
RG250T6N
RG250L6N
RG250S6N
Model
Number
RG130T6N
RG230T6N
RG230S6N
RG140T6N
RG240T6N●
RG240S6N
RG150T6N
RG250T6N●
RG250L6N
RG250S6N
Capacity
Nat.
Imp.
Gal.
25
25
25
33
33
33
42
42
40
42
BTU/Hr.
Input
27,000
32,000
30,000
34,000
40,000
40,000
34,000
40,000
40,000
50,000
Nat.
kW
Input
7.9
9.4
8.8
10.0
11.7
11.7
10.0
11.7
11.7
14.7
U.S.
Gal.
●
30
30
30
●
40
●
40
●
40
●
50
●
50
48
●
50
Capacity
●
114
●
114
114
●
151
151
●
151
●
189
189
182
●
189
LP
BTU/Hr.
Input
27,000
31,000
32,000
34,000
36,000
35,000
34,000
35,000
35,000
48,000
LP
kW
Input
7.9
9.1
9.4
9.9
10.6
10.3
9.9
10.3
10.3
14.1
1st Hour
Rating
(Gal.)
52
58
56
70
76
74
82
89
88
93
1st Hour
Rating
(Liters)Liters
197
220
212
265
288
280
310
337
333
352
Energy
Factor
0.63
0.64
0.63
0.62
0.62
0.62
0.60
0.62
0.60
0.60
Energy
Factor
0.63
0.64
0.63
0.62
0.62
0.62
0.60
0.62
0.60
0.60
Nat.
U.S.
GPH
29
34
32
37
43
43
37
43
43
54
Nat.
Imp.
GPH
Nat.
Liters/
Hour
110
129
121
139
163
163
139
163
163
204
Recovery
90°F Rise*
LP
U.S.
GPH
29
24
33
28
32
37
37
31
34
36
41
36
37
31
41
36
41
36
52
45
Recovery
50°C Rise*
LP
Liters/
Hour
110
125
121
139
129
155
139
155
155
197
LP
Imp.
GPH
24
23
27
31
33
34
31
34
34
45
A
Floor
to
Flue
Conn.
in.
15
59
5915/16
491/4
611/2
605/16
513/4
605/16
605/16
5113/16
605/8
A
Floor
to
Flue
Conn.
mm.
1522
1522
1251
1562
1532
1314
1532
1532
1316
1540
Meet or exceed ASHRAE 90.1b (current standard) C.E.C. Listed
Recovery efficiency ranging up to 80%
G
F
C
B
Vent
Jacket
Size
Dia.
in.
in.
/16
16
18
20
18
20
22
20
22
24
22
B
Jacket
Dia.
mm.
406
457
508
457
508
559
508
559
610
559
3X4
3X4
3X4
3X4
3X4
3X4
3X4
3X4
3X4
4
C
Vent
Size
mm.
76x102
76x102
76x102
76x102
76x102
76x102
76x102
76x102
76x102
102
D
Floor
to
T&P
Conn.
in.
3
49
/4 / 563/8
497/8 / 563/8
385/8
511/2 / 60
1
50
/8 / 565/8
41 / 471/4
50 / 563/8
497/8 / 57
5
40
497/8 / 57
D
Floor
to
T&P
Conn.
mm.
1264 / 1432
1267 / 1432
982
1308 / 1524
1273 / 1438
1041 / 1200
1270 / 1432
1267 / 1448
1032
1267 / 1448
E
Floor
to
Gas
Conn.
in.
11
12
/16
1211/16
1211/16
1211/16
1211/16
1211/16
1211/16
1211/16
/8
1211/16
1211/16
E
Floor
to
Gas
Conn.
mm.
322
322
322
322
322
322
322
322
322
322
Floor
to
Water
Conn.
in.
1
57
571/16
461/2
591/4
579/16
493/16
575/8
577/8
493/8
575/8
F
Floor
to
Water
Conn.
mm.
1449
1449
1181
1505
1462
1249
1464
1470
1254
1464
Floor
Top of
Heater
56
/16
563/8
4511/16
5715/16
563/4
483/16
563/4
563/4
483/16
563/4
Floor
Top of
Heater
mm.
1432
1432
1160
1472
1441
1224
1441
1441
1224
1441
H
Approx.
Depth
in.
1
19
211/2
231/2
211/2
231/2
251/2
231/2
251/2
271/2
251/2
H
Depth
mm.
495
546
597
546
597
648
597
648
699
648
/2
Shipping
Weight
lbs.
109
116
113
132
134
139
150
154
170
167
Approx.
Shipping
Weight
kg.
49
53
51
60
61
63
68
77
70
76
to
in.
3
/8
G
to
Propane models feature a Titanium Stainless Steel propane burner. For Propane (LP)
models change suffix “N” to “X”.
For 10 year models, change suffix from “6” to “10”.
*Based on manufacturer’s rated recovery efficiency.
•Models feature optional top T&P location and must be specified when ordering.
Note: RG230S6N and RG250L6N do not have top T&P option.
Energy Factor and First Hour Rating is based on the latest AHRI directory listings.
General:
Meets NAECA Requirements.
Optional Top T&P Valve
All gas water heaters are certified at 300 PSI test pressure
(2068 kPa) and 150 PSI working pressure
(1034 kPa). All water connections are 3⁄4" NPT (19mm) on 8"
(203mm) centers. All gas connections are
All models design-certified by CSA International (formerly
AGA/CGA), ANSI standard Z-21.10.1 and peak performance
1
⁄2" (13mm).
H
rated.
Dimensions and specifications subject to change
without notice in accordance with our policy of
continuous product improvement.
Suitable for Water (Potable) Heating and Space Heating.
Toxic chemicals, such as those used for boiler treatment,
shall NEVER be introduced into this system. This unit may
NEVER be connected to any existing heating system or
component(s) previously used with a non-potable water
heating appliance.
For U.S. and Canada field service, contact your professional installer or local Bradford White sales representative.
Ambler, PA
Sales 800-523-2931 l Fax 215-641-1670 / Technical Support 800-334-3393 l Fax 269-795-1089 l Warranty 800-531-2111 l Fax 269-795-1089
International: Telephone 215-641-9400 l Telefax 215-641-9750 / www.bradfordwhite.com
C
8"
F
G
D
A
F
B
E
Sales / Technical Support 866-690-0961 / 905-238-0100 l Fax 905-238-0105 / www.bradfordwhite.com
©2017, Bradford White Corporation. All rights reserved.
Printed in U.S.A.1101-B-0417
Loading...