"Highest in Subcontractor Satisfaction among Water Heater/Boiler Manufacturers"
Residential Manufactured Home Atmospheric Vent
Energy Saver Gas Water Heater
Photo is of
M-I-MH30T6FLX
The Manufactured Home FVIR Defender Safety System®Models Feature:
■ Advanced ScreenLok
®
Technology Flame Arrestor Design—Flame
arrestor is designed to prevent ignition of flammable vapor outside of the
ater heater.
w
■ Resettable Thermal Switch—Proven and reliable bimetallic switch prevents
burner and pilot operation in case of ongoing flammable vapor burn inside of
the combustion chamber or restricted air flow.
■ Piezo Igniter—Easy and quick lighting of the pilot burner by push button.
■ Pedestal Base—Rugged and durable base allows easy transport and
positioning, while providing corrosion resistant contact with floor.
■ Maintenance Free—No regular cleaning of air inlet openings or flame arrestor
is required under normal conditions.
■ Sight Window—Offers a view into the combustion chamber to observe the
operation of the pilot and burner.
■ Housing and Urban Development—This water heater is designed in
accordance with H.U.D. and is certified for installation in a manufactured
home(mobile home) only and must be installed in an enclosure that will
completely separate the water heater combustion and venting system from the
dwelling interior.
■ Optional Roof Jack Kit for Installation Flexibility—Roof Jack Kit must be
used when venting and must specify roof size clearance when ordering.
Available in 12", 18"/32", 32"/60" or 48"/90".
■ Vitraglas
corrosive effects of hot water by an exclusive ceramic porcelain-like coating.
The Bradford White high silica Vitraglas
®
Lining—Bradford White water heater tanks are protected from the
®
lining provides a tough interior surface
for our hot water tanks.
■ Fully Automatic Controls—Automatic temperature selection at your
fingertips. Built-in energy cut-off switch prevents abnormally high water
temperature for extra safety. Built-in gas pressure regulation.
■ Convertible Gas Control—Easily convertible control for use with either
Propane or Natural Gas.
■ 1" Non-CFC Foam Insulation—Covers the side and top of tank, saving
energy by retarding loss of heat.
■ Water Connections—3⁄4" NPT factory installed true dielectric fittings extend
water heater life and eases installation.
■ Heat Trap—Installed on hot water outlet to minimize heat loss through piping.
■ Protective Magnesium Anode Rod—Provides added pr
osion for long trouble-free service.
r
cor
■ 3"x4" “Snap Lock” Draft Diverter—Allows either 3" or 4" vent connections
otection against
with inputs of 40,000 BTU/Hr. or less.
■ Flue Baffle—Maximizes the amount of heat absorbed by the tank and
educes heat loss during standby periods.
r
■ Steel T
■ T&P Relief Valve—Included.
■ Brass Drain Valve.
■ Design Certified by CSA International (for
ank—
Heavy gauge steel automatically for
merly AGA/CGA)
olled and welded.
med, r
.
6 or 10-Year Limited Tank Warranties / 6-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
oducts installed in USA, Canada and Puer
For pr
copy of the warranty included with the heater.
Bradford White received the highest numerical score among water heater/boiler manufacturers in the proprietary J.D. Power and Associates/ McGraw-Hill Construction 2006 HVAC and Water Heater/Boiler Subcontractor Satisfaction StudySM.
Study based on 882 r
experiences may vary. Visit jdpower.com
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 7,063,133 B2; 5,954,492; 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185;
5,485,879; 5,277,171; (B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968;
4,672,919; Re. 34,534. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105.
Defender Safety System®, ScreenLok®and Vitraglas®are registered trademarks of Bradford White®Corporation.
esponses measuring 3 water heater/boiler manufactur
ers and measur
es opinions of subcontractors. Pr
to Rico. Some states do not allow limitations on warranties. See complete
esults are based on experiences and perceptions of subcontractors surveyed in May through July 2006. Your
y study r
oprietar
110-B 0807
NATURAL GAS AND LIQUID PROPANE GAS
Model
N
umber
Capacity
G
Floor to
H
ot
Water
Conn.
i
n.
H
Floor to
H
eater
Top
i
n.
E
Floor to
G
as
Conn.
i
n.
K
Depth
i
n.
Approx.
Shipping
W
eight
l
bs.
F
Floor to
C
old
Water
Conn.
i
n.
A
Floor to
F
lue
Conn.
i
n.
D
Floor to
T
&P
Conn.
i
n.
C
Vent
S
ize
i
n.
B
Jacket
D
ia.
i
n.
G
al.
U
.S.
I
nput
Nat.
B
TU/Hr.
I
nput
L
P
B
TU/Hr.
Recovery
90°F Rise*
M
-I-MH30T6FLX
M-I-MH40T6FLX
3
0
40
2
5
33
3
3
35
2
8
30
3
3
35
2
8
30
5
9
1
/8
5
9
3
/8
1
6
1
8
3
x4
3
x4
5
0
5
0
1
3
1
3
2
0
2
2
1
04
1
20
2
2
1
/4
2
2
1
/4
5
7
1
/2
5
7
3
/4
5
6
3
/8
5
6
5
/8
3
2,000
34,000
3
2,000
34,000
G
PH
Imp.
Meet or exceed ASHRAE 90.1b (current standard) C.E.C. Listed
77% Recovery Efficiency
G
al.
I
mp.
Nat.
G
PH
U.S.
Nat.
G
PH
Imp.
LP
G
PH
U.S.
LP
Model
N
umber
Capacity
G
Floor to
H
ot
Water
Conn.
m
m.
H
Floor to
H
eater
Top
m
m.
E
Floor to
G
as
Conn.
m
m.
K
Depth
m
m.
Approx.
Shipping
W
eight
k
g.
F
Floor to
C
old
Water
Conn.
m
m.
A
Floor to
F
lue
Conn.
m
m.
D
Floor to
T
&P
Conn.
m
m.
C
Vent
S
ize
m
m.
B
Jacket
D
ia.
m
m.
Liters Input
Nat.
k
W
Input
L
P
k
W
Recovery
50°C Rise*
M-I-MH30T6FLX
M-I-MH40T6FLX
114
151
9.4
10.0
9.4
10.0
125
132
125
132
1502
1508
406
457
76x102
76x102
1270
1270
565
565
1460
1467
1432
1465
330
330
508
5584754
Hour
Liters/
Nat.
Hour
Liters/
LP
Manufactured Home Energy Saver Models
Residential Atmospheric Vent Gas Water Heater
Optional Roof Jack Kits
Part Number
12
"
18"/ 32
"
32"/ 60
"
48"/ 90
"
239-37030-01
239-37030-02
239-37030-03
239-37030-04
A
15"
331/2"
321/2"-621/2"
50"-981/2"
B
T
hrough The Roof
Clearance
16"-33"
331/2"-66"
371/2"-74"
541/2"-1091/2"
B
22.5° Max.
A
11
5
/8"
Square
61/2"
7"
4"
5"
3"
9"
To order a natural gas heater change suffix "X" to "N".
For 10 year models, change suffix from “6” to “10”.
*Based on manufacturers rated recovery efficiency.
(Includes roof jack, hardware, instructions)
The water heater enclosure access door must be on the outside wall of the manufactured home (mobile home) only. Access to the water heater enclosure from the
inside of the manufactured home (mobile home) is not permitted. The CSA International (formerly AGA/CGA) listing of this water heater includes the field installation
of the following components: roof jack, and heater tie down materials. These components for field installation are shipped in a separate box from the heater and
must be installed according to instructions. No other components are approved for use with the water heater. The water heater must be installed in accordance
with The Federal Manufactured Home Construction and Safety Standard Title 24 CRF, Part 3280.
Meets NAECA Requir
ements.
General
tified at 300 PSI (2068 kPa) test pressure and 150 PSI (1034 kPa) working pressure.
All gas water heaters ar
All water connections ar
All models design cer
e cer
e 3⁄4" NPT (19mm), all gas connections ar
tified by CSA Inter
national (formerly AGA/CGA), ANSI Z-21.10.1 and peak performance rated.
Designed in accordance with the H.U.D. Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280.707 (d)(2) for energy efficiency.
Dimensions and specifications subject to change without notice in accor
Suitable for Water (Potable) Heating and Space Heating.
Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into this system. This unit may NEVER be connected to any existing
heating system or component(s) previously used with a non-potable water heating appliance.
Sales 800-523-2931 ●Fax 215-641-1670 / T
110-B 0807
For U.S. and Canada field ser
International:
echnical Suppor
Telephone 215-641-9400 ●Telefax 215-641-9750 / www.bradfordwhite.com
Sales / T
©2007, Bradford White Corporation. All rights reserved.
e 1⁄2" (13mm).
vice, contact your pr
echnical Suppor
t
800-334-3393 ●Fax 269-795-1089 ●W
dance with our policy of continuous pr
, PA
Ambler
ofessional installer or local Bradfor
t
866-690-0961 / 905-238-0100 ●Fax 905-238-0105 / www
d White sales r
ar
ranty
oduct impr
epresentative.
800-531-2111 ●Fax 269-795-1089
.bradfor
ovement.
dwhite.com
Printed in U.S.A.