Bradford White EF-60T-125E-3NA User Manual

3 or 5-Year Limited Tank Warranties / 1-Year Limited Warranty on Component Parts.

For more information on warranty, please visit www.bradfordwhite.com

For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.

MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526;
6,684,821; 6,442,178; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984;
8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS:
2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. eF Series

®

, Vitraglas®and Hydrojet®are registered trademarks of Bradford White

®

Corporation.

800-B-1115-A

FEATURING:

Commercial eF Series®Ultra High Efficiency

Gas Water Heater

Photo is of

EF-60T-199E-3N

The eF Series®Models feature:

■ Thermal Efficiency up to 99.1%—Ultra High Efficiency results in less

fuel consumption and greater hot water recovery.

■ ICON HD

™

—Intelligent proven design combines temperature control,

diagnostic codes, and system ignition functions into a single control
board with a digital LCD display.

■ ENERGY STAR

®

Models Available—EF60T125 & EF100T

(150,199,250,399) Models.

■ Factory Installed Hydrojet

®

Sediment Reduction System—Cold water

inlet sediment reducing device helps prevent sediment build up in the
tank.

■ Direct Spark Ignition—For improved operational dependability and

durability.

■ Operation Mode—Two different digitally displayed operation modes

have the capability of adjusting the temperature setting up to 180°F
(82°C), and adjusting the degree setting (ºF to ºC, or ºC to ºF).

■ Service Mode—Eight different digitally displayed service screens can be

easily cycled through by pressing the select button. There is the
capability of adjusting the temperature setting up to 180°F (82°C),
adjusting the degree setting (ºF to ºC, or ºC to ºF), locking the maximum
temperature setting that can be adjusted in operation mode, displaying
the temperature sensor reading, displaying the flame current, and
displaying diagnostic codes.

■ Premix Power Burner—A self compensating negative regulation system

automatically increases or decreases fuel flow when a change in
combustion air is detected. This provides the range for optimum
combustion and efficiency (automatic high altitude compatibility).

■ Flexible Venting—The eF Series

®

can vent vertically or horizontally with
either 2", 3" or 4" PVC, CPVC or ABS (not approved for Canada) vent
pipe, and is approved for direct vent closed combustion applications, or
those applications that require inside air for combustion. Foam Core
pipe is permitted on the entire venting system. The eF Series

®

is also
approved for unbalanced venting, which means the air intake pipe
doesn't have to be vented the same distance as the exhaust.

■ Ultra Quiet Operation.

■ A Single Exhaust Pressure Switch.

■ 1" NPT Side Connections for Space Heating.

■ Sanitizing Capability—Temperature setting up to 180°F (82°C).

■ Complies with the latest ultra-low NOx requirement (14 ng/J NOx

limit).

■ ASME Code Available on All Models.

■ NSF Construction Available.

■ T&P Relief Valve—Installed.

■ Low Restrictive Brass Drain Valve—Durable tamper proof design.

eF Series® Additional Equipment Features:

Three Pass Heat Exchanger System—The three pass
Heat Exchanger system keeps the hot combustion gases
moving at a high velocity. The combination of high
turbulence and velocity causes an enormous rate of heat
transfer into the water.

Submerged Combustion Chamber—Submerging the
combustion chamber in the center of the water storage
tank minimizes radiant heat loss and improves efficiency.

Zero Inch Clearance—The eFSeries

®

jacket is cool to the
touch and is approved for zero inch clearance to
combustibles for unsurpassed installation flexibility.

Vitraglas

®

Lining—Bradford White tanks are lined with an

exclusively engineered enamel formula that provides
superior tank protection from the highly corrosive effects of
hot water. This formula (Vitraglas

®

) is fused to the steel

surface by firing at a temperature of over 1600ºF (871ºC).
Magnesium Anode Rods—Each eF Series

®

model has
multiple anodes to provide added protection against
corrosion for long trouble-free service (EF100T399 has one
powered anode rod and 2 magnesium anode rods).

Factory Installed Hydrojet

®

Sediment Reduction

System—Cold water inlet sediment reducing device helps

prevent sediment build up in tank.
Water Connections—Factory installed true dielectric

waterway fittings extend water heater life and eases
installation.

Hand Hole Cleanout—Allows inspection of tank interior
and facilitates the removal of sediment deposits.

E.C.O.—A manual re-set Energy Cut Off (E.C.O) shuts off all
gas in event of an overheat condition. The ECO is manually
resettable.

Non-CFC Foam Insulation—Covers the sides and top of
tank, reducing the amount of heat loss. This results in less
energy consumption, improved operation efficiencies and
jacket rigidity.

Commercial Gas High Efficiency Water Heater

eF Series®Optional Equipment Features:

Maxitrol Gas Pressure Regulating valve—Ensures proper
supply pressure to eF unit of 7" to 11" W.C. (provided
incoming pressure is between 1/2 and 2 psi). This can be
ordered as a separate part, or as part of the heater. For
the separate part, please use p/n 243-45517-00. Part is
included with EF100T399 model.

NSF Compliance Kit—p/n 265-44542-04.
Low Inlet Gas Pressure Option—Pre-assembled to allow

operation with natural gas inlet pressure down to 3.5" w.c.
(Not available on EF-100T-300/399E-3N(A) models or any
size propane models.)

Air intake cannot exceed exhaust by more than 30 ft. in any venting situation. Subtract 5 ft. for each additional 90° elbow.

Intake/
Combustion
Air

Rain Cap

V

ent

Exhaust

36 1/4"

p/n 239-44069-01

p/n 239-44069-02 (for 2" vent pipe only)

3" Vent Pipe

EF-60T-125

EF-100T-150

Power

Direct Vent

60 ft.
60 ft.

Max. Intake Length
Max. Exhaust Length

Power

Vent

N/A

120 ft.

EF-60T-150

EF-100T-199

Power

Direct Vent

50 ft.
50 ft.

Power

Vent

N/A

100 ft.

EF-60T-199

EF-100T-250

Power

Direct Vent

40 ft.
40 ft.

Power

Vent

N/A

80 ft.

EF-100T-300

Power

Direct Vent

30 ft.
30 ft.

Power

Vent

N/A

60 ft.

2" Vent Pipe

EF-60T-125

Power

Direct Vent

15 ft.
15 ft.

Max. Intake Length
Max. Exhaust Length

Power

Vent

N/A

30 ft.

EF-60T-150

EF-100T-150

Power

Direct Vent

15 ft.
15 ft.

Power

Vent

N/A

30 ft.

EF-60T-199

EF-100T-199

Power

Direct Vent

15 ft.
15 ft.

Power

Vent

N/A

30 ft.

6" Vent Pipe

EF-100T-399

Power

Direct Vent

120 ft.
120 ft.

Max. Intake Length
Max. Exhaust Length

Power

Vent

N/A

240 ft.

4" Vent Pipe

EF-60T-125

EF-100T-150

Power

Direct Vent

85 ft.
85 ft.

Max. Intake Length
Max. Exhaust Length

Power

Vent

N/A

170 ft.

EF-60T-150

EF-100T-199

Power

Direct Vent

75 ft.
75 ft.

Power

Vent

N/A

150 ft.

EF-60T-199

EF-100T-250

Power

Direct Vent

65 ft.
65 ft.

Power

Vent

N/A

130 ft.

EF-100T-300

Power

Direct Vent

55 ft.
55 ft.

Power

Vent

N/A

110 ft.

EF-100T-399

Power

Direct Vent

25 ft.
25 ft.

Power

Vent

N/A

50 ft.

EF-100T-399

Power

Direct Vent

50 ft.
50 ft.

Power

Vent

N/A

100 ft.

Concentric Vent Kit Termination—3" termination fitting
provides for only one exit opening through wall or roof
(p/n 239-44069-01).