Commercial eF Series® Ultra High Efficiency
Gas Water Heater
The eF Series® Models feature:
■ Thermal Efficiency up to 99.1%—Ultra High Efficiency results in less fuel
FEATURING:
Photo is of
EF-60T-199E-3N
consumption and greater hot water recovery.
■ ICON HD
diagnostic codes, and system ignition functions into a single control board
with a digital LCD display.
■ ENERGY STAR
(150,199,250,399) Models.
■ Factory Installed Hydrojet
inlet sediment reducing device helps prevent sediment build up in the tank.
■ Direct Spark Ignition—For improved operational dependability and
durability.
■ Operation Mode—Two different digitally displayed operation modes have
the capability of adjusting the temperature setting up to 180°F (82°C), and
adjusting the degree setting (ºF to ºC, or ºC to ºF).
■ Service Mode—Eight different digitally displayed service screens can be
easily cycled through by pressing the select button. There is the capability
of adjusting the temperature setting up to 180°F (82°C), adjusting the
degree setting (ºF to ºC, or ºC to ºF), locking the maximum temperature
setting that can be adjusted in operation mode, displaying the temperature
sensor reading, displaying the flame current, and displaying diagnostic
codes.
■ Premix Power Burner—A self compensating negative regulation
system automatically increases or decreases fuel flow when a change
in combustion air is detected. This provides the range for optimum
combustion and efficiency (automatic high altitude compatibility).
■ Flexible Venting—The eF Series
either 2", 3" or 4" (51mm, 76mm or 107mm) PVC, CPVC or ABS (not
approved for Canada) vent pipe, and is approved for direct vent closed
combustion applications, or those applications that require inside air for
combustion. The eF Series
which means the air intake pipe doesn’t have to be vented the same
distance as the exhaust.
■ Ultra Quiet Operation.
■ A Single Exhaust Pressure Switch.
■ 1" (25mm) NPT Side Connections for Space Heating.
■ Sanitizing Capability—Temperature setting up to 180°F (82°C).
■ Complies with the latest ultra-low NOx requirement (14 ng/J NOx
limit).
■ ASME Code Available on All Models.
■ NSF Construction Available.
■ T&P Relief Valve—Installed.
■ Low Restrictive Brass Drain Valve—Durable tamper proof design.
™
—Intelligent proven design combines temperature control,
®
Models Available—EF60T125 & EF100T
®
Sediment Reduction System—Cold water
®
can vent vertically or horizontally with
®
is also approved for unbalanced venting,
3 or 5-Year Limited Tank Warranties / 1-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties.
See complete copy of the warranty included with the heater.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821;
7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238;
7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186;
2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. eF Series
®
, Vitraglas® and Hydrojet® are registered trademarks of Bradford White® Corporation.
800-B-0418
Commercial Gas High Efficiency Water Heater
eF Series® Additional Equipment Features:
Three Pass Heat Exchanger System—
Exchanger system keeps the hot combustion gases moving at
a high velocity. The combination of high turbulence and velocity
causes an enormous rate of heat transfer into the water.
Submerged Combustion Chamber—
combustion chamber in the center of the water storage tank
minimizes radiant heat loss and improves efficiency.
Zero Inch Clearance—
The eFSeries® jacket is cool to the
touch and is approved for zero inch clearance to combustibles for
unsurpassed installation flexibility.
Vitraglas® Lining—
An exclusively engineered enamel formula
that provides superior tank protection from the highly corrosive
effects of hot water. This formula (Vitraglas
surface by firing at a temperature of over 1600°F (871°C).
Protective Magnesium Anode Rods—
model has multiple anodes to provide added protection against
corrosion for long trouble-free service (EF100T399 has two
powered anode rods).
The three pass Heat
Submerging the
®
) is fused to the steel
Each eF Series®
Factory Installed Hydrojet® Sediment Reduction
System—
Cold water inlet sediment reducing device helps
prevent sediment build up in tank.
Water Connections—
Factory-installed true dielectric fittings
extend water heater life and simplify water line connections.
Hand Hole Cleanout—
Allows inspection of tank interior and
facilitates the removal of sediment deposits.
E.C.O.—
A manual re-set Energy Cut Off (E.C.O) shuts off all gas
in event of an overheat condition. The ECO is manually resettable.
Non-CFC Foam Insulation—
Covers the sides and top of
tank, reducing the amount of heat loss. This results in less energy
consumption, improved operation efficiencies and jacket rigidity.
EF-60T-150
EF-100T-150
Power
Direct Vent
15 ft.
15 ft.
Power
Direct Vent
50 ft.
50 ft.
Power
Direct Vent
75 ft.
75 ft.
Power
EF-60T-150
EF-100T-199
Power
EF-60T-150
EF-100T-199
Power
Vent
N/A
30 ft.
Vent
N/A
100 ft.
Vent
N/A
150 ft.
Air intake cannot exceed exhaust by more than 30 ft. in any venting situation. Subtract 5 ft.
for each additional 90° elbow.
2" Vent Pipe
Max. Intake Length
Max. Exhaust Length
3" Vent Pipe
Max. Intake Length
Max. Exhaust Length
4" Vent Pipe
Max. Intake Length
Max. Exhaust Length
6" Vent Pipe
Max. Intake Length
Max. Exhaust Length
EF-60T-125
Power
Direct Vent
15 ft.
15 ft.
EF-60T-125
EF-100T-150
Power
Direct Vent
60 ft.
60 ft.
EF-60T-125
EF-100T-150
Power
Direct Vent
85 ft.
85 ft.
EF-100T-399
Power
Direct Vent
120 ft.
120 ft.
Power
Vent
N/A
30 ft.
Power
Vent
N/A
120 ft.
Power
Vent
N/A
170 ft.
Power
Vent
N/A
240 ft.
eF Series® Optional Equipment Features:
Maxitrol Gas Pressure Regulating valve—
supply pressure to eF unit of 7" to 11" W.C. (provided incoming
Ensures proper
EF-60T-199
EF-100T-199
Power
Direct Vent
15 ft.
15 ft.
EF-60T-199
EF-100T-250
Power
Direct Vent
40 ft.
40 ft.
EF-60T-199
EF-100T-250
Power
Direct Vent
65 ft.
65 ft.
Power
Vent
N/A
30 ft.
EF-100T-300
Power
Vent
N/A
80 ft.
Power
Vent
N/A
130 ft.
Power
Direct Vent
30 ft.
30 ft.
Power
Direct Vent
55 ft.
55 ft.
Power
EF-100T-300
Power
Vent
N/A
60 ft.
Vent
N/A
110 ft.
Concentric Vent Kit Termination—
EF-100T-399
Power
Direct Vent
25 ft.
25 ft.
EF-100T-399
Power
Direct Vent
50 ft.
50 ft.
Power
Vent
N/A
50 ft.
Power
Vent
N/A
100 ft.
3" termination fitting
provides for only one exit opening through wall or roof
(p/n 239-44069-01).
pressure is between 1/2 and 2 psi). This can be ordered as a
separate part, or as part of the heater. For the separate part,
please use p/n 243-45517-00. Part is included with EF100T399
model.
NSF Compliance Kit—
Low Inlet Gas Pressure Option—
p/n 265-44542-04.
Pre-assembled to allow
ent
Exhaust
Intake/
Combustion
Air
Rain Cap
operation with natural gas inlet pressure down to 3.5" w.c.
(Not available on EF-100T-300/399E-3N(A) models or any size
propane models.)
Optional Honeywell EnviraCOM™ Alarm Module—
Provides indication (contacts are closed) when an alarm is
present via normally open contacts (rated for up to 24 VAC).
Kit Number – 265-51961-00.
p/n 239-44069-02 (for 2” vent pipe only)
36 1/4"
p/n 239-44069-01