Bradford White DS1-40S6FBN, DS1-50S6FBN Information Sheet

Residential Direct Vent
Energy Saver Gas Water Heater
Photo is of
DS1-50S6FBN
FEATURING:
The Direct Vent FVIR Defender Safety System®Models Feature:
Bradford White ICON System
Intelligent gas control with proven millivolt
powered technology and built-in piezo igniter. A standard, off the shelf thermopile converts heat energy from the pilot flame into electrical energy to operate the gas valve and microprocessor. No need for external electricity.
-- Enhanced Performance—Proprietary algorithms provide enhanced First Hour
Delivery ratings and tighter temperature differentials.
-- Advanced Temperature Control System—Microprocessor constantly
monitors and controls burner operation to maintain consistent and accurate water temperature levels.
-- Intelligent Diagnostics—An exclusive green LED light prompts the installer
during start-up and provides ten different diagnostic codes to assist in troubleshooting.
-- Pilot On Indication—Flashing green LED provides positive indication that pilot
is on.
-- Separate Immersed Thermowell—High strength advanced polymer
composite thermowell provides isolation between electric temperature sensor and surrounding water. No need to drain the tank when removing gas valve.
Closed Combustion—All air for combustion is taken directly from the outside.
The co-axial vent pipe (pipe inside a pipe) draws combustion air in through the outer pipe (5"), and exhausts the products of combustion through the inner pipe (3"). The vent pipe at the top of the unit can be rotated for venting flexibility.
Reinforced Seals—Seals surround the closed combustion chamber and the FVIR
inner door, preventing the ignition of flammable vapors outside of the water heater.
Maintenance Free—The vent piping and the closed combustion chamber with
reinforced seals do not require regular cleaning under normal operating conditions.
Sight Window—Offers a view into the combustion chamber to observe the
operation of the pilot and burner.
Factory Installed Hydrojet
®
Total Performance System—Cold water inlet
sediment reducing device. Helps prevent sediment build up in tank. Increases first hour delivery of hot water while minimizing temperature build up in tank.
Vitraglas
enamel formula that provides superior protection from the highly corrosive effects of hot water. This formula (Vitraglas
®
Lining—Bradford White tanks are lined with a exclusively engineered
®
) is fused to the steel surface by firing at a
temperature of over 1600ºF.
Cast Aluminum Air Intake Boot—A cast molded air intake boot pr
exceptional installation durability
Telescoping Solid Vent Kits—Multiple kits (see reverse side) allow up to 8ft.
.
ovides
vertical and 8ft. horizontal vent lengths (horizontal termination only).
Flexible Vent Kit—The maximum vent length (horizontal and vertical) can be
flexed to 100" (horizontal ter
1" Non-CFC Foam Insulation—Surrounds the tank surface, saving energy by
mination only).
reducing the amount of heat loss.
Pedestal Base.
ater Connections—
W
Factory Installed Heat Traps.
Protective Magnesium Anode Rod.
T&P Relief Valve—Included.
Low Restriction Brass Drain Valve—Durable tamper proof design.
3/4" NPT factor
y installed tr
ue dielectric fittings.
6 or 10-Year Limited Tank Warranties / 6 or 10-Year Limited Warranty on Component Parts.
e information on warranty, please visit www.bradfordwhite.com
For mor
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete copy of the warranty included with the heater.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171; (B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534; 7,270,087 B2. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.
Defender Safety System®, V
itraglas
®
and Hydr
®
egistered trademarks of Bradford White
ojet
e r
ar
®
Corporation.
103-B-0211-A
Residential Direct Vent Water Heater
NATURAL GAS AND LIQUID PROPANE GAS
Direct Vent Energy Saver Models
M
eet or exceed ASHRAE 90.1b (current standard) C.E.C. Listed
79% Recovery Efficiency
M
odel
Number
A
pprox.
S
hipping
Weight
lbs.
A
F
loor
to Center
L
ine of V
ent
in.
B
J
acket Dia.
in.
C
apacity Recovery at
9
0°F Rise*
D
S1-40S6FBN
DS1-50S6FBN
U.S. G
al.
4
0
50
Imp. G
al.
3
3
42
Nat.
BTU/Hr.
I
nput
3
8,000
42,000
LP
BTU/Hr.
I
nput
3
6,000
40,000
Nat. U.S. G
PH
4
1
45
Nat. Imp. G
PH
3
4
37
LP U.S. G
PH
3
9
43
LP Imp. G
PH
3
2366
3
1
/4m
in.
72
1
/4min.
1
69
186
2
0
20
M
odel
Number
Approx.
S
hipping
Weight
kg.
A
F
loor
to Center
Line of
V
ent
mm.
B
J
acket Dia.
mm.
Capacity Recovery at
5
0°C Rise*
DS1-40S6FBN DS1-50S6FBN
Liters
151 189
N
at.
k
W
Input
11.1
12.3
L
P
k
W
Input
10.5
11.7
L
P
L
iters/
Hour
148 163
N
at.
L
iters/
Hour
155 170
1607 1835
F
F
loor
to Top
o
f Heater
in.
4
9
3
/
4
583/
4
F
F
loor
to Top
of Heater
mm.
1264 1492
E
F
loor to Gas C
onn.
in.
1
5
15
1
4
7
/
8
147/
8
E
F
loor to Gas Conn.
mm.
381 381
378 378
D
F
loor
to T&P
C
onn.
in.
4
3
1
/
2
521/
4
D
F
loor
to T&P
Conn.
mm.
1105 1327
H
F
loor
to Water
C
onn.
in.
5
0
3
/
4
593/
4
H
F
loor
to Water
Conn.
mm.
1289 1518
K
D
epth
in.
3
1
1
/
8
31
K
D
epth
mm.
795 787
7 7
C
V
ent
Size
in.
3
-5
3-5
C
V
ent
Size
mm.
76-127 76-127
76 85
508 508
C
A
B
F
E
H
73/4"
K
D
C
A
E
73/4"
K
All Propane models feature a Titanium Stainless Steel propane burner. For Propane (LP) models change suffix "BN" to "SX". For 10 year models, change suffix from “6” to “10”. *Based on manufacturers rated recovery efficiency. Telescoping Solid Vent Kit (239-47810-00) or Flexible Vent Kit (239-47812-00) can be ordered and shipped with water heater,
or ordered and shipped separately For vent kit components and venting instructions, refer to Installation and Operating Manual.
Optional Telescoping Solid Vent Kits: Kit “A” Kit “B” Telescopes from 61⁄2" to 93⁄16" Part No. 239-41331-00 Kit “C” Telescopes from 133⁄4" to 23 Kit “D” Telescopes from 4913⁄16" to 9513⁄16" Part No. 239-41424-00
Telescopes from 43⁄4" to 511⁄16" Part No. 239-41260-00
1
1
16" Part No. 239-41029-00
Meets NAECA Requirements General
All gas water heaters are certified at 300 PSI test pressure (2068 kPa) and 150 PSI working pressure (1034 kPa). All potable water connections are 3⁄4" NPT (19mm) on 8" (203mm) centers. All gas connections 1⁄2" (13mm).
All models design certified by CSA International (formerly AGA/CGA), ANSI Z-21.10.1 and peak performance rated.
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
Suitable for Water (Potable) Heating and Space Heating.
Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into this system. This unit may NEVER be connected to any existing heating system or component(s) previously used with a non-potable water heating appliance.
Sales 800-523-2931 ●Fax 215-641-1670 / T
103-B-0211-A
For U.S. and Canada field ser
International:
Flexible V
Telephone 215-641-9400 ●Telefax 215-641-9750 / www.bradfordwhite.com
Sales / T
©2011, Bradford White Corporation. All rights reserved.
vice, contact your pr
t
800-334-3393 ●Fax 269-795-1089 ●W
echnical Suppor
echnical Suppor
ent Kit (Side V
, PA
Ambler
t
866-690-0961 / 905-238-0100 ●Fax 905-238-0105 / www
ofessional installer or local Bradfor
iew)
Telescoping Solid Vent Kit (Side View)
d White sales r
epresentative.
ranty
ar
800-531-2111 ●Fax 269-795-1089
.bradfor
dwhite.com
Printed in U.S.A.
Loading...