Boxlight P12 LIWH, P12 LTW, P12 LTWH, P12 WX40NXT User Manual

P12 Projector

User Guide

mimio.boxlight.com

Table of Contents ............................2

Table of Contents

Usage Notice ...................................3

Safety Information ...............................3

Precautions .........................................4

Introduction ......................................6

Package Overview ..............................6

Product Overview ...............................7

Main Unit .............................................. 7

Control Panel ....................................... 8

Interface ............................................... 9

Remote Control .................................. 10

Installation ..................................... 11

Connecting the Projector ..................11

Connect a Desktop/Laptop Computer 11

Powering the Projector On / Off ........13

Powering On the Projector ................. 13

Powering Off the Projector ................. 14

Warning Indicator ............................... 14

Adjusting the Projected Image ..........15

Adjusting the Projector�s Height ........ 15

Adjusting the Projector�s Focus ......... 16

Adjusting Projection Image Size

(Diagonal) .......................................... 17

User Controls ................................19

Control Panel & Remote Control ......19

Control Panel ..................................... 19

Remote Control .................................. 20

On-screen Display Menus ................22

How to operate ................................. 22

Picture ................................................ 23

Screen ............................................... 25

Setting ................................................ 27

Volume ............................................... 29

Options .............................................. 30

Options | Lamp Settings .................... 32

3D ...................................................... 33

Interactive .......................................... 34

LAN .................................................... 35

Replace the Lamp .............................41

Appendices ....................................41

Installing and Cleaning the Optional

Dust Filter .........................................43

Compatibility Modes .........................44

VGA Analog ....................................... 44

HDMI Digital ....................................... 45

List of specifications ..........................48

Wall Mount Installation ......................50

Regulation & Safety Notices .............51

Safety Information

The lightning ash with arrow head within an equilateral triangle is

intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufcient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

Class B emissions limits

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Important Safety Instruction

1. Do not block any ventilation openings. To ensure reliable operation of

the projector, and to protect from over heating, it is recommended to install the projector in a location that does not block ventilation. As an

example, do not place the projector on a crowded coffee table, sofa,

bed, etc. Do not put the projector in an enclosure such as a book case

or a cabinet that restricts air flow.

2. Do not use the projector near water or moisture. To reduce the risk of fire and/or electric shock, do not expose the projector to rain or

moisture.

3. Do not install near heat sources such as radiators, heaters, stoves or

any other apparatus, such as amplifiers, that emits heat.

4. Clean only with dry cloth.

5. Only use attachments/accessories specified by the manufacturer.

6. Do not use the unit if it has been physically damaged or abused.

Physical damage/abuse would be (but not limited to):

 Unit has been dropped.  Power supply cord or plug has been damaged.  Liquid has been spilled on to the projector.  Projector has been exposed to rain or moisture.  Something has fallen in the projector or something is loose inside.

Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards.

7. Do not let objects or liquids enter the projector. They may touch dangerous voltage points and short out parts that could result in fire or

electric shock.

8. The unit should only be repaired by appropriate service personnel.

Precautions

Please follow all warnings, precautions, and maintenance as recommended in this user�s manual.

▀■ Warning- Do not look into the projector’s lens when the lamp is

▀■ Warning- To reduce the risk of re or electric shock, do not

▀■ Warning- Please do not open or disassemble the projector as

on. The bright light may hurt and/or damage your eyes.

expose this projector to rain or moisture.

this may cause electric shock.

 When service

life of the lamp expires, the lamp module must be replaced.

Otherwise, the

projector cannot

be switched on.

To replace the lamp, please

follow the

steps stated in “Replace the Lamp” on Pages 48-49.

▀■ Warning- Before replacing the lamp, please have the projector

completely cooled down. Operate as described on

Pages 48-49.

▀■ Warning- This projector will automatically detect the service life

of its lamp. When the projecor shows a warning message, the lamp must be replaced “immediately”.

▀■ Warning- After replacement of the lamp module, please reset

the lamp hour counter (see Page 49).

▀■ Warning- When switching the projector off, please ensure

the cooling cycle has been completed before disconnecting power. Allow 90 seconds for the projector to cool down.

▀■ Warning- When service life of the lamp is about to expire, the

“Lamp Warning: Exceed Service Life” message will be shown on the screen. Please contact the local

dealer or service center to replace the lamp as soon as possible.

Do:

 Turn off and unplug the power plug from the AC outlet before

cleaning the product.

 Use a soft, dry cloth with mild detergent to clean the display

housing.

 Disconnect the power plug from AC outlet if the product is not

being used for a long period of time.

Do not:

 Block the slots and openings on the unit provided for ventilation.

 Use abrasive cleaners, waxes or solvents to clean the unit.

 Use under the following conditions:

- In extremely hot, cold, or humid environments. Ensure that the ambient room temperature is within 5 - 40°C.



Relative Humidity is 5 - 40°C, 80% (Max.), non-condensing.



- In areas susceptible to excessive dust and dirt.

- Near any appliance generating a strong magnetic eld.

- In direct sunlight.

Package Overview

Unpack and inspect the box contents to ensure all parts listed below are in the box. If something is missing, please contact your nearest customer service center.

Projector

2 × AAA Batteries

Power Cord

IR Remote Control CD-ROM

VGA Cable

(User’s Manual)

Product Overview

Main Unit

 The interface

is subject to model’s

1. Control Panel

2. Focus Switch

3. Ventilation (inlet)

4. IR Receiver

5. Ventilation (outlet)

6. Speaker

7. Power Socket

8. Input / Output Connections

9. Lens

10. IR Camera

Control Panel

21 4

1. Power LED

2. Enter

3. Temp LED

4. Lamp LED

5. Menu

6. Signal source

7. Four Directional Select Keys

8. Power/Standby button

9. IR Receiver

USB

Interface

7 8

11 12

 Monitor loop

through only support in VGA IN1-In/YPbPr.

ECP

RJ45

1. USB Connector (For FW upgrade and interactive function)

2. VGA-Out/VGA-In2 Connector

3. RS-232 Connector (9-pin DIN Type)

4. VGA-In1/YPbPr Connector (PC Analog Signal/Component Video Input/HDTV/YPbPr)

5. Composite Video Input Connector

6. HDMI2 Input Connector

7. HDMI1 Input Connector

8. Audio Input Connector (3.5mm mini jack)

9. Composite Audio Input (right) Connector

10. Composite Audio Input (left) Connector

11. Audio Input Connector (microphone connector)

12. Audio Output Connector (3.5mm mini Jack)

13. Power Socket

14. KensingtonTM Lock Port

15. RJ45 Connector

16.

ECP

17.

Laser Curtain (Optional)

Remote Control

 The specic inter-

faces are selected in terms of the

specications of types.

1. LED Indicator

2. Power On/Off

3. Enter

4. Four Directional Key

5. Menu

6. Exit

7. Zoom +

8. Reset

9. Auto

10. Input

11. Zoom -

12. Volume +/-

13. Keystone +/-

14. Image

15. Blank

16. Aspect ratio

17. VGA1

18. HDMI1

19. VGA2

20. HDMI2

21. Video

22. Freeze

23. Numbered keypad

(for password input)

2122

Installation

Connecting the Projector

 Remote keys vary

with projector types.

Connect a Desktop/Laptop Computer

MOLEX

E62405SP

 Due to applica-

tion discrepancies in different countries/regions, certain regions may include different accessories

External Display

Audio Output

Microphone

Router / Network Switch

1................................................................................................. RS232 Cable

2.....................................................................................................USB Cable

3.....................................................................................................VGA Cable

4................................................................................................... HDMI Cable

5.......................................................................................... Audio Input Cable

6.................................................................................................. Power Cable

7....................................................................................... Audio Output Cable

8.......................................................................................... Audio Input Cable

9....................................................................................................RJ45 Cable

10....................................................................................... VGA Output Cable

 Remote keys vary

with projector types.

Connect to Video Sources

DVD player, STB (Set-top

Box), HDTV receiver

E62405SP

 Due to

application discrepancies in different countries/ regions, certain regions may include different accessories.

Composite Video Output

Microphone

Audio Output

1................................................. 15-Pin to 3 RCA Component/HDTV Adapter

2................................................................................................... HDMI Cable

3...........................................................................................Audio Cable/RCA

4................................................................................................... Audio Cable

5.................................................................................................. Power Cable

6.................................................................................Composite Video Cable

7...........................................................................................Audio Cable/RCA

8.......................................................................................... Audio Input Cable

When the projector

INPUTMENU

LAMPTEMP

ON(B)

STANDBY(R)

is in standby mode

(<0.5W), the VGA output and the transmitted audio

will be deactivated.

Powering the Projector On / Off

Powering On the Projector

1. Securely connect the power cord and signal cable. When

connected, the POWER/STANDBY LED will turn Red.

2. Turn the lamp on by pressing “ ” button either on the projec-

tor or on the remote. Once pressed, the POWER/STANDBY LED will now turn Blue.

3. Turn on and connect the source that you want to display on

the screen (computer, notebook, video player, etc). The projector will detect the source automatically. If not,

press menu button and go to “OPTIONS” to make sure “Auto Source” is enabled.

 If you connect multiple sources at the same time, press the

“INPUT” button on the control panel or direct source keys on the remote control to switch between inputs.

POWER/STANDBY

 Turn on the

projector rst and

then select the signal sources.

Powering Off the Projector

1. Press the “ ” button on the remote control or

on the control panel to turn the projector off.

The following message will be displayed on the screen.

Press the “ ” button again to confirm; otherwise the message will disappear after 15 seconds. When you press the “ ” button for the second time, the fan will start cooling the system and the projector will shut down.

2. The cooling fans continue the cooling cycle for about 35

seconds and subsequently the POWER/STANDBY LED will

Flash Blue. When the POWER/STANDBY LED lights up solid Red, the projector has entered standby mode. If you wish to turn the projector back on, you must wait until the projector has completed the cooling cycle and has entered standby mode. Once in standby mode, simply

press “ ” button to restart the projector.

3. Disconnect the power cord from the electrical outlet and the

projector.

4. Do not turn the projector on immediately following a power

off procedure.

Contact the



nearest service center if the

projector displays these symptoms.

Warning Indicator

When the warning indicators (see below) come on,

the projector will automatically shutdown:

 “LAMP” LED indicator lights up in solid Red.

 “TEMP” LED flashes Red. This indicates the projector has

overheated. Under normal conditions, the projector can be switched back on.

Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicator lights up again, please contact your nearest service center for assistance.

Adjusting the Projected Image

Adjusting the Projector’s Height

The projector is equipped with Adjustable feet for adjusting the image height.

1. Locate the adjustable feet you wish to modify on the

underside of the projector.

2. Rotate the adjustable ring clockwise to raise the projector or counter clockwise to lower it. Repeat with the remaining

feet as needed.

Tilt-Adjustment Feet

Tilt-Adjustment Ring

Adjusting the Projector’s Focus

To focus the image, slide the focus lever to left/right until the

image is clear.

WXGA series: The projector will focus at distances from



1.499 to 2.06 ft. (0.457 to 0.628 meter).

Focus Lever

+ 37 hidden pages