Bowers & Wilkins DM560 User Manual

DM560

Stand-mount/Bookshelf loudspeaker system

Product Summary

●

The two way front vented system encompasses the same design technology of the DM550
with its rigid one-piece baffle construction, but offers a noticeable extended bass – thanks to
a bigger 8in bass/midrange driver and increased enclosure size.

Technical highlights

●

B&W's Tweeter technology ensures that the sound remains focused and time sensitive and
that the stereo image is presented with unparalleled three dimensional accuracy.

●

The cabinets feature a specially designed high density front baffle which achieves almost
Matrix-like stability in strengthening overall enclosure construction. The bevel edges of the front
moulding reduce diffraction and improve dispersion.

●

The crossover components use heavy gauge wire throughout and new drivers guarantee not
only high reliability but ensure that top specifications are met.

B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.

www.bwspeakers.com

Drive Units

Frequency Response

1 x 26mm high-frequency with
aluminium dome, 26mm coil on
aluminium dome former, wound with
polymide resin and heat cured
1 x 200mm bass/midrange with
composite short fibre cone, 26mm coil
on high temperature former, wound with
polymide resin and heat cured
65Hz – 20kHz ± 2.5dB on reference
axis

Sensitivity
Nominal Impedance
Power Handling

Dimensions

Finish

90dB spl(2.83V 1m)
8 ohms
10W – 75W into 8 ohms on
unclipped programme
Height: 490mm Width: 236mm
Depth: 302mm
Black ash or walnut vinyl