Bowers & Wilkins CWM7 User Manual
English
CWM7
2
Welcome to Bowers and Wilkins and the CWM7 Series
Thank you for choosing Bowers & Wilkins. When John Bowers rst established our company he did
so in the belief that imaginative design, innovative engineering and advanced technology were keys
that could unlock the enjoyment of audio in the home. His belief is one that we continue to share and it
inspires every product we design.
The CWM7 Series of in-wall speakers is designed to offer easy installation and very high quality
audio reproduction for discrete custom install applications. This manual describes the installation
of CWM7 Series speakers within conventional stud and sheetrock (joist and plasterboard) walls. It
begins by listing the contents of the CWM7 series car ton:
www.bowers-wilkins.com
3
2. CWM7 Series Basics1. CWM7 Carton Contents
1
1
1
1
CWM7.3
CW M7.3 CW M7.4
CWM7 Series speaker assembly (bafe, frame/back •
box, grille)
Reservoir box•
Cut-out template•
Paint mask•
Port plug•
Blanking Plate•
L-shaped push-lock fastener removal tool•
Allen key (CWM7.3 only)•
Document pack containing Quick Start Guide and •
Warranty information
Environmental Information
All Bowers & Wilkins products are
designed to comply with international
directives on the Restriction of Hazardous
Substances (RoHS) in electrical and electronic
equipment and the disposal of Waste Electrical
and Electronic Equipment (WEEE). These symbols
indicate compliance and that the products must be
appropriately recycled or processed in accordance
with these directives. Consult your local waste disposal
authority for guidance.
CWM7 Series in-wall speakers comprise a bafe
carrying the speaker drivers and crossover, an
integrated back-box and front ange, and a
magnetically secured grille. The back box is connected
via external terminals to the speaker cables with the
bafe connecting automatically as it is inserted in the
back box.
A reservoir box can be tted within the wall either
above or below the back box to enhance the speaker’s
low frequency performance. The CWM7.3 incorporates
a MF/HF bafe that can be rotated 90° to enable the
speaker to be used in landscape orientation for centre
channel applications.
CWM7 Series speakers require wall aperture
dimensions described in the following table:
Model Aper tur e Height Aper tur e Width Reservoir Box Clearance
CWM7.3 711mm (28 in) 251mm (9.9 in) 465mm (18.31 in)
CWM7.4 390mm (15.4 in) 226mm (8.9 in) 465mm (18.31 in)
CWM7.5 331mm (13 in) 187mm (7.4 in) 390mm (15.4 in)
Loading...