Bowers and Wilkins CM-2 Concept 90 Brochure

CM2

Floor-standing loudspeaker system

Product Summary

●

The column-shaped sub-bass module of the CM2 is small and only needs to reproduce low
frequencies up to 150Hz. Spacing of the internal matrix construction is therefore greater than in
the CM1 but more than enough to keep unwanted enclosure radiation to an absolute minimum.

●

The CM2’s drivers are reflex loaded and again computer modelling has produced perfect
optimisation of output and bass extension.

Technical highlights

●

B&W's Tweeter technology ensures that the sound remains focused and time sensitive and
that the stereo image is presented with unparalleled three dimensional accuracy.

●

Kevlar®: B&W developed and patented the method of using Kevlar® for loudspeaker cones
to reduce unwanted standing waves. DuPont originally created Kevlar® for use in bulletproof
vests.

B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.

www.bwspeakers.com

Drive Units

Frequency Response
Sensitivity
Nominal Impedance

1 x 26mm metal dome high frequency
1 x 126mm Kevlar® cone upper
bass/midrange
2 x 130mm bass
48Hz – 20kHz ± 1.5dB free-field
85dB spl(2.83V 1m)
not less than 4 ohms

Power Handling

Dimensions

Finish

50W – 200W Automatic overload
protection (APOC) on midrange/high
frequency
Height: 955mm Width: 162mm
Depth: 211mm
Bass width: 252mm; depth 241mm
White or black semi-gloss, grey matt
Nextel.